Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.
View 4 RepliesExcel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").
I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.
Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.
I was wondering if it's possible to copy and paste formulas to a brand new excel sheet. I created an excel sheet with some forumlas but when I try to copy and paste it to a new page it only pastes the values and not the formulas.
Is there any way to transfer the formulas as well?
With a macro to copy from the last entire row with data and immediately insert and paste to the row below in the active worksheet. I am using Office 2007.
View 9 Replies View Relatedcopy or cut then paste - paste grayed out in excel 07 tried several popular fixes from the web without luck.
Tried: the Excel repair and diagnose tool
Tried: uninstall / reinstall Excel program as well
Tried: go into Hikey - user - software - Microsoft - excel - new - 32 binary and tried adding new rule
Tried: Close Excel.2. Go to C:Documents and Settings[userID]Application DataMicrosoftExcel3. Delete the XLB file.4. Open Excel (the XLB file will be recreated - like the normal.dot) ------> This one - I could not find the XLB file - looked everywhere.
Tried: Open excel hit alt-f11 (to get to the VBE) hit ctrl-g (to see the immediate window) type this and hit enter: application .command bars ("cell").reset Then back to excel to test it."
Here is my situation:
Background:
- Excel VBA 2007
- I have a macro that inserts a set of vlookups in range D3:D8.
- When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces.
- I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives:
- Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2()
' This macro inserts the VLookup into cell B2
Dim lastcolumn As Long
Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)"
Range("D3").Select
[Code] .......
Have a HUGE excel 2007 sheet of over 1500 rows that looks like this:
A1IDS09C1_PEND_COB2345678910IDS15C1_HIST_GATIL111213141516Sheet3
I need to get it to look like this:
A1IDS09C1_PEND_COB2COPY YES SHRLEVEL CHANGE SORTKEYS SORTDEVT SYSDA3BMCSTATS YES UPDATEDB2STATS YES UNLDDN
RU0014CONDEXEC YES UNLOAD RELOAD REDEFINE NO DELETEFILES YES SORTNUM 125DDTYPE WORK ACTIVE YES
DDTYPE SORTWORK ACTIVE YES6DDTYPE LOCPFCPY ACTIVE YES7DSNPAT
[Code] .......
In other words, I need to copy the text in blue so that it is above the text in black and the text in red so that it is below. Then I need the macro to repeat this procedure for each cell that it finds containing text in black. I have already created and run a macro to insert blank lines between each black text entry.
I need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View RelatedI have setup a forecast model and now find it necessary to update many formulas
I have set period 1 formulas correctly and would like to copy through periods 2-12. However each period has already been populated with data that need to remain intact in this process
For example,
I have formulas to copy at I5 and I9. I6,7,8 should be skipped
These formulas should be pasted to K5 and K9 respectively, while leaving K6,7,8 intact
This is of course a simple example, the column contains 15 formulas to be copy/paste
Background info: I have developed a Hired Equipment Time Sheet with numerous formulas to auto populate and calculate various cells to minimize user impute requirements.
Can cell formulas be toggled on and off to allow manual impute of data rather than the formula automatically populating information in the cell if the need arises? If so, can this be done via a drop down pick? Also can or will the formula still be protected?
I am running Excel 2007.
I have set up a table and for ease of explanantion Column C has a formulas in it to add together the values found in Column A and B.
EG C3 foumula = "=sum(A3+B3)"
Now in cols d & e I have manually entered figures and in colum F I want to add up those figures so F3 should read "=sum(D3+E3)"
In the past I have always been able to just copy the cell C3 and paste it into F3 and the formula would automatically copy and offset the various cells to the correct cells for the new posiitoning.
However, for some reason when I copy the cell, it now pastes the value only into the pasted cell and does not copy the formula, if I click on paste special to try to just copy the formula I now get a pop up asking me if I want to paste as Unicode Text or Text.
I have no recollection of changing any settings.
I need some VBA to copy row 2 then paste it (including formulas) into the next available row in the same sheet but then also clear the data in row 2 but retain the formulas.
View 2 Replies View RelatedI have the following macro that copies data from a calendar-style setup on one sheet and pastes it in a contiguous list on another sheet:
Code:
Option ExplicitSub move_daily_data_to_ordersvstips()
Dim OutSH As Worksheet
Dim findit As Range
[Code]....
I would like only the values from the "Data by Month" sheet to paste to the "Orders vs Tips" sheet. However, all my attempts are returning various errors/inconsistent results.
This is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.
I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.
Using Microsoft Excel 2007 and all of a sudden, my spreadsheets are not automatically calculating the formulas. It does not matter if I have other workbooks open or not. I still get the problem. It does not happen 100% of the time to make it even more complicated.
- Calulation set to auto in Excel Options.
- No VBA functions being used. I can the worksheet summing 1 + 1 and get the error periodically. It does not have to do with the spreadsheet being too complicated.
- Even if I can hit Ctrl-Alt-F9 to force the formulas to calculate, it won't work.
Is it possible to conditional format cells with formulas in Excel 2007. It used to be possible in Excel 2003 but I'm struggling to find this in the new version.
View 6 Replies View RelatedI have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies View RelatedI'm working on a large set of data, so rather than read/writing lots of times to the sheet, I've followed the tip of reading a range to a variant array, processing the array, and then writing the whole thing back to the sheet (and it is indeed much much faster).
Dim vdata As Variant
vdata = Range("SummaryOutput")
'do a bunch of logic
Range("SummaryOutput") = vdata
To make things simpler (fewer ranges/variants to manage) I've defined a large range which includes non-data cells (blanks, labels, SUM formulas, etc..). The problem is when I read the range into variant array, it only copies the cells' values -- which means that once I write it back to the sheet, the formulas are lost.
So what I'm looking for is some way to read range into a variant whilst keeping the formulas (which I would see just being a string value in the variant array?). Does anyone know how this could be done?
I have a lot of formulas that I don't want to be changed or deleted, but I still want the user to be able to enter data into the cells.
If I use "Protect sheet" I can't select a cell or enter something into it. I sure there is some setting I have to change, but I'm not sure what to select.
I'm using excel 2007
I am running Microsoft Excel 2007 on Windows XP. Right now, I have the standard macro set up that will replace formulas with their values. It's the standard macro that does this for the entire sheet:
Code:
Sub All_Cells_In_Active_WorkSheet_1()
With ActiveSheet.UsedRange
.Cells.Copy
.Cells.PasteSpecial xlPasteValues
.Cells(1).Select
End With
Application.CutCopyMode = False
End Sub
However, with this being a daily task, the issue is that this wipes the formulas out for future dates, which is obviously problematic. To be more specific:
I have one tab (HISTORICAL) with over 200 rows with each business day this year. Columns B through H will pull data from two other tabs (ENTRY1 and ENTRY2) that is entered daily, using a formula that tells Excel to only pull the data for the current date:
Code:
=IF(A224=ENTRY1!B1,ENTRY1!B2,0)
So each day, someone will open this sheet and input their data on the ENTRY1 and ENTRY2 tabs. These numbers will auto populate over to the HISTORICAL tab for that specific day.
Also on each day, someone else will open the sheet and go to the HISTORICAL tab and run the macro that converts the formulas on that sheet to the value.
I want to be able to run the macro only for the row with the current date (and any date before will be fine since those will already be converted anyway).
So, taking today for example, when I run the macro, I want it to convert the data only in the 11/8/2011 and previous rows, but NOT for the 11/9/2011 and later rows.
I am working with Excel 2007 and have an occurring problem when I resize a table. Some of my forumlas copy to the new rows, while others do not. How can I ensure all my formulas copy to the newly created rows. Also sometime when they do copy to the new row an #REF! in the formula where the range should be , yet if I copy and paste the formula from the above row it works.
Here is an example of one of my Formulas Note Sheet1!$J$3:$J$500 is also a table Called Data
=SUMPRODUCT((Sheet1!$J$3:$J$500)*(Sheet1!$A$3:$A$500=$A14&DP$4)) and this is how it is inserted into a new row
=SUMPRODUCT((Sheet1!#REF!)*(Sheet1!#REF!=$A15&DP$4))
I have along list of data in column B.
I want to be able to copy and paste cell C3 in cell C4 to C44. The actual list is very long.
What is the fastest way to accomplish this in Excel 2007 ?
Sheet1 *BC2Date Item39/7/2009iitttppp12344649/7/2009*59/7/2009*69/7/2009*79/7/2009*89/7/2009*99/7/2009*109/7/2009*119/7/2009*129/7/2009*139/7/2009*149/7/2009*159/7/2009*169/7/2009*179/7/2009*189/7/2009*199/7/2009*209/7/2009*219/7/2009*229/7/2009*239/7/2009*249/7/2009*259/7/2009*269/7/2009*279/7/2009*289/7/2009*299/7/2009*309/7/2009*319/7/2009*329/7/2009*339/7/2009*349/7/2009*359/7/2009*369/7/2009*379/7/2009*389/7/2009*399/7/2009*409/7/2009*419/7/2009*429/7/2009*439/7/2009*449/7/2009* Excel tables to the web >> Excel Jeanie HTML 4
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
What I have attached is spreadsheet I've built to quickly generate an army list for a tabletop game. Anyone can click on the Force Organization Slot (FOS) and choose the type of unit and from there, select the specific unit name attached to that FOS. Each individual unit has a list of options/upgrades currently attached to the sheet from cells AD through AX and the points cost listed next to each upgrade.
For example, when selecting the Rhino unit from the Dedicated_Transport FOS, there should be 4 drop down lists of selectable upgrades (Storm Bolter, Hunter-Killer Missile, Dozer Blade, and Extra Armor). Currently, I have only named the ranges for the Rhino and Razorback units in order to get this working properly without having to go through the entire list of units and change names/create ranges/ect.
What I'm aiming to do is to create an individual drop down list that is directly related to the Unit Name cell in order to populate a complete and selectable upgrade list for each unit. I have played around with some functions that work in the spreadsheet (see cells X10:X12) but do not work properly with Data Validation.
Oddly enough, when I enter this formula under Data Validation:
=IF($A$3<>$AD$1:$AD$182,VLOOKUP(A3,Options,2,FALSE),"")
I do not get an error, yet the drop down list does not allow me to select anything as I thought it would.
I've got a main workbook (excel 2007) with a main spreadsheet where i group all the information (text and values) about brands and models linked to 10 workbooks (brands) with several spreadsheets (one spreadsheet=one model).
On the main spreadsheet I've got 16 lines for each model which they have the follow formulas, wich are linked to other workbook / spreadsheet (Mar/Gato)
1)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE));"";VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE))
and will return text values
2)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;82;FALSE));"";VLOOKUP(V844;[Mar.xlsx]G!$A$3:$CE$78;82;FALSE))
And will return number values
3)
IF(M844<>"";HLOOKUP($V$3;[Mar.xlsx]Gato!$A$2:$CE$78;2;FALSE);"")
And will return number values. The return value (;2 goes from 2 to 16.
This process repeats to all the 10 workbooks e and 250 spreadsheets
4) Table Array of the model spreadsheet
With regard to formula 1) and 2)
The problem is that the table array (on the model spreadsheet) could have diferent dimensions (becouse the launch year of the model) like this:
A$3:$CE$78 (2009 - Launch year)
A$3:$BR$78 (2010 - Launch year)
A$3:$BE$78 (2011 - Launch year)
A$3:$AR$78 (2012 - Launch year)
A$3:$AE$78 (2013 - Launch year)
And the return column (value) for formula 1) is always ;3;
And the return column (value) for formula 2) are like this:
;82; (2009 - Launch year)
;69; (2010 - Launch year)
;56; (2011 - Launch year)
;43; (2012 - Launch year)
;30; (2013 - Launch year)
;17; (2014 - Launch year)
The difference between above values is 13, it corresponds 12 months and the total column (12+1)
For the formula 3) the table array its the same, the only difference is instead of starting A$3, starts in A$2
5) The update of the formulas 1) 2) 3) for 2014
I'm doing this manually... The formulas are updated like this,for 2013, I've got table array A$3:$AE$78 and the return value (;17, then for 2014 i will have a table array A$3:$AR$78 and the return value will be (;30, and so on
5) Change the network drive
For other reasons I've to change my files to another network drive, something like this:
Q:KPI2014Main File
6) Main Goal
I was thinking using Excel's regular Find and Replace feature to change:
- The network drive designation
- the table array area
- The return value
But I don't know if this process ( Find and Replace) is safe and clean. I'm doing this manually and I've got on the main worbook/sheet 4000 lines with 3 formulas its 12000 operations!I'm on the 350 line....!
The main goal is to update the all formulas (links) to "brand" workbooks and inside "model" spreadsheets automatically with a macro.