Losing Formulas In Copy & Paste

May 22, 2007

This is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.

I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.

View 4 Replies


ADVERTISEMENT

Entire Column Losing Formulas (2007, Win XP)

May 8, 2009

Whenever a particular file is saved, and then reopened it says "Error Data Lost" and the entire column that used to have the formulas now has =#NA.

Its only happening in 1 particular column. Anyone know a specific reason this might happen or is something in my code just jacked up?

View 9 Replies View Related

Clear The Contents Of Each Cell In A Range Without Losing Formulas

Dec 6, 2006

Is there a way to clear the contents of each cell in a range without losing formulas?

View 9 Replies View Related

Copy/paste Formulas Only

Mar 6, 2007

I have setup a forecast model and now find it necessary to update many formulas

I have set period 1 formulas correctly and would like to copy through periods 2-12. However each period has already been populated with data that need to remain intact in this process

For example,
I have formulas to copy at I5 and I9. I6,7,8 should be skipped

These formulas should be pasted to K5 and K9 respectively, while leaving K6,7,8 intact

This is of course a simple example, the column contains 15 formulas to be copy/paste

View 9 Replies View Related

VBA To Copy / Paste (including Formulas) To Next Available Row

Mar 20, 2014

I need some VBA to copy row 2 then paste it (including formulas) into the next available row in the same sheet but then also clear the data in row 2 but retain the formulas.

View 2 Replies View Related

VBA Copy / Paste Values Only (not Formulas)

Feb 19, 2013

I have the following macro that copies data from a calendar-style setup on one sheet and pastes it in a contiguous list on another sheet:

Code:
Option ExplicitSub move_daily_data_to_ordersvstips()
Dim OutSH As Worksheet
Dim findit As Range

[Code]....

I would like only the values from the "Data by Month" sheet to paste to the "Orders vs Tips" sheet. However, all my attempts are returning various errors/inconsistent results.

View 1 Replies View Related

Copy And Paste Formulas To New Excel Sheet?

Jan 13, 2014

I was wondering if it's possible to copy and paste formulas to a brand new excel sheet. I created an excel sheet with some forumlas but when I try to copy and paste it to a new page it only pastes the values and not the formulas.

Is there any way to transfer the formulas as well?

View 2 Replies View Related

Macro To Copy Paste Values And Formulas

Oct 13, 2009

I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.

View 10 Replies View Related

Excel 2007 :: Can't Copy / Paste Formulas

Jul 8, 2012

Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.

View 4 Replies View Related

Copy Range & Paste To Display Formulas

Jan 15, 2008

I'm working on a large set of data, so rather than read/writing lots of times to the sheet, I've followed the tip of reading a range to a variant array, processing the array, and then writing the whole thing back to the sheet (and it is indeed much much faster).

Dim vdata As Variant
vdata = Range("SummaryOutput")
'do a bunch of logic
Range("SummaryOutput") = vdata

To make things simpler (fewer ranges/variants to manage) I've defined a large range which includes non-data cells (blanks, labels, SUM formulas, etc..). The problem is when I read the range into variant array, it only copies the cells' values -- which means that once I write it back to the sheet, the formulas are lost.

So what I'm looking for is some way to read range into a variant whilst keeping the formulas (which I would see just being a string value in the variant array?). Does anyone know how this could be done?

View 3 Replies View Related

Excel 2007 :: Copy / Paste Won't Carry Over Formulas

Apr 19, 2012

Excel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").

I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.

Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.

View 2 Replies View Related

Copy / Paste Columns That Has Specific Range With Formulas

Jan 3, 2013

Is there any way to copy a column that has a specific range

=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc

to copy that to a column lets say 5 columns to the right without my range changing?

=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")

I need the same range in all columns, and I cant seem to accomplish this.

View 3 Replies View Related

Copy The Information From The Row Directly Above The New Row And Paste (values, Formulas, Formats, Etc) Into The New Row

Dec 18, 2008

1. In whatever cell is selected when the macro is run, enter a new row.

2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row.

3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc.

I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).

View 3 Replies View Related

Macro To Copy/paste Specific Rows (and Formulas) Based On Drop Down

Sep 8, 2009

I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.

At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.

Is there any easy copy/paste macro for such a thing?

View 9 Replies View Related

Losing Information During Copy

Jul 28, 2006

As you can see this macro copies a worksheet from one workbook to a new one. It is 14 columns wide by just under 700 rows long. I am losing information out of cells all over the place.

ChDir "H:HOMETIMCEXCELCOUPON_COUNT6_JUN"
Workbooks.Open Filename:="H:HOMETIMCEXCELCOUPON_COUNT6_JUNJUN_2006" + ".xls"
Calculate
Sheets("MONTH_END").Select
Sheets("MONTH_END").Copy
Cells.Select
Selection.Copy
Range("A1").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False .........................

View 2 Replies View Related

Paste Formulas As Values (strip Out Unwanted Formulas)

May 13, 2008

I have a macro running this code to strip out unwanted formulas and formatting.

Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False

Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2

'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If

Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................

A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.

View 4 Replies View Related

Copy, Paste, Change Font Size, Copy, Paste, Print VBA

Mar 29, 2009

I'm using 2003.

1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.

View 9 Replies View Related

Paste ALL Except Formulas

Dec 8, 2008

I want to copy everything on several sheets to one sheet.
I do not want to carry the formulas (some are absolute)
I do want all data. formatting and layout (cell fill, merged cells.....)

View 5 Replies View Related

Looking For A Way To Paste Formulas Into A Spreadsheet

Jul 28, 2009

I want to be able to open the Excel spreadsheet, and have some easy way to post formulas into that document. I was thinking a Macro would work, but I cannot seem to find a way. Columns A through V contain the data that is exported from the payroll system. I want to find a way to paste my formulas into W2:AH200. The formulas will always be the same.

I'd like the user to be able to:

1. Export the payroll information to Excel and open the document.
2. Run a macro (or some similar action) to place the formulas in W2:AH200 into the spreadsheet.
3. Input data into AH2, AH3, AH4, and AH5.

A sample document is attached. Columns A-V are what get exported by the payroll system, and W-AH are my formulas I've added to this sample (and what I want to be able to easily add to new spreadsheets).

View 2 Replies View Related

Paste Values / Formulas Only

Mar 30, 2014

How pasting values/formulas only works. I have a spreadsheet I've been using to record product sales, commission, shipping etc. It currently has three pages of records. But now I have a new spreadsheet I want to use with basically the same 'look' as the old one (same columns, entries per sheet, etc) but using better formulas. I don't want to manually input all the data from the old one and I thought I could copy all the cells from the old one and then paste values only into the new one. But when I do that, it pastes the values but also deletes the formulas in the new one. So then I thought I could copy all the cells from the new and paste only formulas into the old one but then it deletes all the values in the old one. Is this what is supposed to happen? And if so, is there a way to achieve what I want?

View 1 Replies View Related

VBA - Paste Values Not Formulas?

Jun 23, 2014

How can i change this code to paste values not formulas?

Code:
Private Sub Admin_Click()
Range("BO40:CI73").Clear
Dim rng As Range

[Code]....

View 2 Replies View Related

VBA - Paste Formulas Into Cell Ranges

Aug 12, 2014

I would like to add another step that pastes the formulas copied from the active sheet, to specific ranges of cells.

I would like the PasteSpecial XlFormats to apply to all cells on the active sheet, where as the PasteSpecial xlValues would only apply to all cells not in the ranges that the Formulas are getting pasted into.

Also for formatting purposes I have a few cells that are merged in the active spreadsheet, that unmerge when I run the macro. Ideally I would like any previously merged cells to stay merged once the macro is run.

Below is the VB I have...

VB:

Sub SaveSheet()
ActiveSheet.Copy
With ActiveSheet.UsedRange
.Copy
.PasteSpecial xlValues
.PasteSpecial xlFormats

[Code]...

View 3 Replies View Related

Cut And Paste In The Unprotected Cells, The Formulas Get A REF#

Jun 25, 2009

I have created an Excel template for others to use. They can enter data in certain unprotected cells and the data is linked to other places in the workbook. If they Cut and Paste something in the unprotected cells, the formulas get a REF#. There is no problem if they Copy and Paste. How can I prevent the REF# error without resorting to VBA?

View 3 Replies View Related

Paste Formulas Without Auto Filling

Sep 28, 2009

Is it possible to disable the auto filling, when copy/pasting formulas?

I have a range of formulas, which I want to copy/paste, and I want the pasted formulas to be the exact same as the copied.

Is this possible? I would prefer not having to use $ on all formulas.

View 7 Replies View Related

Cut+paste Formulas+formats To Other Cells

Nov 17, 2008

I've got two pieces of code.

1. cuts+pastes all formulas and formats to another location.
2. cuts+pastes required formulas but not cell formats to another location.

The s/s is over 330,000 rows deep which makes manual changes impossible.

I attach small s/s containing both codes.

What I want to do is copy+paste formulas+formats from cells having a number in the cell below to cells 4 columns along and two rows down. The s/s illustrates this.

View 11 Replies View Related

Macros & Formulas Paste Into A Worksheet

Aug 6, 2008

I have a formula which i need to paste into a worksheet, doing this is tedious and boring to say the least, problem is i am not sure how to get the macro to skip blank lines and only insert the formula where there are prices. Each week the worksheet changes so there is no consistent layout.

View 9 Replies View Related

Tab Names In Formulas...drag And Paste?

Jan 23, 2009

I have a workbook which contains 12 sheets, 1 for each month of the year. I also have over 100 sheets, 1 for each agent that covers their stats for each month of the year based on some of the cells from the monthly sheets.

I am trying to drag the formulas over but it will always just refer to January, instead of January and then next cell refers to the February tab, etc, etc.

View 9 Replies View Related

Macro To Paste Formulas As Values

Jun 8, 2006

found a great macro which copies data from multiply worksheets and pasts them onto master sheet.

I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.

View 4 Replies View Related

Copy / Paste Certain Cells Then Paste 3 Sheets Into New Workbook - VBA 1044 Error?

Feb 3, 2012

This macro works fine on my machine but not with other users:

This should copy/paste certain cells then paste 3 sheets into a new work book.

ON other computers it seems to paste in a picture? works OK for me?

Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy

[Code] ..........

View 1 Replies View Related

Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose

Jan 29, 2014

I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.

The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved