Error Extracting Pivottable Data With VBA
Mar 29, 2007
I try to extract datas from a pivottable (so one data source) which could change.
The items of one field are changing (given by the user through Inputbox): "batch"
The items of the second field ("type plate") are at each time visible (the macro make them visible to have the complete information concerning the "batch")
So I want to extract values and labels from one particular pivottable (the one I display), selecting several batches. But the problem is that some of the items have no value, so disapear fron the table) even if they are visible. As I extract the value on each item (see code below) I get an error message saying "runtime error 1004 application-defined" when the macro read "valeur".
Dim pt1 As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
Dim pj As PivotItem
Dim i As Double
Dim valeur As String
I tried to go through this problem using "on error goto solution" but it works only one time, and after same error message
How coud I avoid to calculate "valeur" with the Items (pi) not displayed ?
View 9 Replies
ADVERTISEMENT
Jan 27, 2009
I successfully created two PivotTables two days ago, but when I added more rows of data to the source worksheet I could not refresh either PivotTable view. So after much frustration, I deleted both worksheets and again tried to create a new PivotTable using the wizard. I keep getting this error, and have no idea what it is telling me so that I can go about fixing it:
"The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field."
View 2 Replies
View Related
Aug 3, 2007
The code I'm using that results in the following error message: "Run-Time Error '1004':
The pivotTable field name is not valid. To create a pivottable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a pivottable field, you must type a new name for the field." Here's the code, I've seperated it into each sub hoping that will make it easier to read:
Option Explicit
Sub main_prog()
Call td_metrics_import
Call pt_td_metrics("Pivot_Page1", "PivotTable1", "PivotTable2")
Call pt_td_metrics("Pivot_Page2", "PivotTable3", "PivotTable4")
Call create_graph
End Sub...............
View 8 Replies
View Related
Oct 2, 2008
I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous
View 2 Replies
View Related
Mar 20, 2014
I have a directory folder with an active workbook and another workbook id like to copy data from. The Following macro opens up a file in the same directory, copies some data and pastes it in the active workbook. However with this code I have to specify the filename, 'Data.xlsm' in the example code. I would like it to copy data from the only other workbook in the current directory WITHOUT having to specify the name in the code, so just opening it up no matter what filename it has.
In addition I would like to extract the filename from the workbook im copying data from and paste it into the activewoorkbook in sheet 1 Cell A1. I had a look at getopenfilename function but cant seem to make it work for my purpose.
View 4 Replies
View Related
Mar 6, 2009
I get the error message "The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a pivot Table field, you must type a new name for the field." when I try to make a pivot-table.
View 3 Replies
View Related
May 8, 2014
I am connecting Excel to a database and there is a field called Data Created which is timestamp. Data comes out nicely in a Pivot Table
1. I would like to be able to group by month but the grouping fiction is grayed out
2. How can we convert the timestamp to only date format. I am able to select only Date for that column but it seems that it keeps the time, even though it only shows the date in the pivot table the bar above shows date and time.
View 1 Replies
View Related
Jun 2, 2008
I'm trying to change the source data of an existing PivotTable so that it is linked to a raw data source in another workbook. The workbook it pulls the data from changes every month so I made this flexible code that is meant to pull the raw data every month:
Sub ImportNewSource()
Dim Filt As String
Dim FilterIndex As Integer
Dim Title As String
Dim FilePath As Variant
Dim ThisPivot As PivotTable
Dim FileName As String
Dim ShtNum As Integer
Dim LastRow As Long
The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field.
When I do it manually, it works just fine. There aren't any changes to the PivotTable field or anything like that so I'm stumped. I've tested the range that has the source data and its selecting the proper range and when I do it manually it works fine.
View 9 Replies
View Related
Feb 18, 2009
I have about 10 pivot tables that only have one Pivot Field Item Selected (i.e., Jane Smith) with dates as column fields and a sum for data items. Everytime I refresh the pivot tables and there is a new person in the data tab (which is the data the pivot table is referenced to), the new name populates in the pivot table. I am sure I could include all of the names in one pivot table, but there is a long explanation why I only keep one name per pivot table in this particular workbook.
Attached is an example. As you can see, when you refresh the pivot table, the new name (Jason Smith) which I added to the data tab, will be included in the pivot table.
I am trying to figure out if there is way either with VBA or without VBA to prevent all of the pivot tables in the workbook to not select any new Pivot Field Items when I refresh the pivot tables.
View 9 Replies
View Related
Jun 18, 2008
I have a worksheet of data collected from on online list of names and addresses all in one column. I'd like to pivot the data so I can sort it, etc. Unfortunately, the entries are not the same length (meaning some have five rows some have six or seven, etc. I have created an only file so everyone can see the issue.
a href=[url]
View 4 Replies
View Related
Jan 1, 2014
I'm trying to extract the first name from each row in column a using:
Formula:
A B
Joe Smith Joe
Julie Smith Julie
Julie #VALUE!
If the cell does not have 2 names it's giving me an error.
View 10 Replies
View Related
Dec 24, 2012
Can I create a PivotTable with two columns of data for the same Column header?
I have created a PivotTable in Excel 2003 with months for rows and cities for columns. I would like to have TWO columns of data for each city. The two data columns are: Average House Selling Price, and Number of Houses Sold. When I put both of these data fields into the PivotTable Wizard, they are listed below each other so that each Month occupies two rows, but each city occupies one column. I want the two data fields beside each other so that each month only occupies one row, but there are two data columns for each City.
View 2 Replies
View Related
May 29, 2008
I am working pivot tables off of one large excel spreadsheet for my data. I have multiple pivot tables on each of 5 worksheets. The problem is this. Every other week I am sent an updated spreadsheet with the same column names each week which I then copy and paste it into the spreadsheet of the last one. When I refresh the pivot tables, I end up with duplicate field sets. For example, on column in the original data sheet is gender. On the first sheet I went through and renamed the "M"'s and "F"s to be "Male" and "Female" so that it is better looking when printed. Now when i get the new information and copy and paste it to rplace the old, and refresh the pivot tables, I end up with "Male" "Female" AND "M" "F". Now the "Male" and "Female" fields are empty and the "M" and "F" fields have the information. Is this a result of me renaming the fields?
View 5 Replies
View Related
Apr 3, 2014
I have the following code which successfully opens the specified workbook and copies the values to the active workbook, but then gives an error on the line of extracting filename, and when extracting last author. However, the code works fine if I use 'getopenfilename'.
[Code]......
View 8 Replies
View Related
Jul 14, 2014
"Type Mismatch error" in the macro below. I am trying to implement logic, where if value in column F, equals "1ma+89", then extract 89 only in column G. I also have other values in column F, where I have set specific rules for them, to extract numbers.
I have attached a worksheet with example data and highlighted red cells, represent incorrect output from the macro.
test2_14July.xlsm
View 4 Replies
View Related
May 20, 2008
10/05/0808:30:00 AMValid Card EntryLamDoor 1
10/05/0808:31:00 AMDoor Leave Open Door 1
10/05/0808:32:00 AMDoor Closed Door 1
10/05/0808:41:00 AMValid Card Exit Yap Door 1
10/05/0808:46:00 AMValid Card Exit Lam Door 2
10/05/0809:14:00 AMValid Card EntryLam Door 2
10/05/0810:18:00 AMValid Card Exit Lam Door 2
10/05/0810:19:00 AMValid Card Entry Yap Door 1
10/05/0810:40:00 AMValid Card Exit Yap Door 1
10/05/0810:42:00 AMValid Card EntryLamDoor 2
11/05/0808:30:00 AMValid Card EntryLamDoor 2
11/05/0808:20:00 AMValid Card EntryYapDoor 1
11/05/0810:20:00 AMValid Card Exit Lam Door 1
11/05/0811:40:00 AMValid Card Exit Yap Door 1
the above is the data i need to work with (dates are in dd/mm/yy). i need to find a way (a macro, preferably) to extract the date and time corresponding to one person, and paste it into a new sheet, e.g. at sheet 2 (renamed to "lam") should be
10/05/0808:30:00 AM 11/05/0808:30:00 AM
10/05/0808:46:00 AM 11/05/0810:20:00 AM
10/05/0809:14:00 AM
10/05/0810:18:00 AM
10/05/0810:42:00 AM
View 10 Replies
View Related
Jan 23, 2013
I have a spreadsheet full of data and I need to extract only those lines of data which can be identified by the last three letters in a cell. I am adding an example spreadsheet which highlights the rows I am trying to extract based on the contents in column B but only where column B ends in KY.
Example data extract requirement.xlsx
View 5 Replies
View Related
Jan 5, 2009
I have two exported lists of data to compare from my newsletter program. One is the list of email addresses that I sent the newsletter to and the other is a list of the bounced email addresses.
Question: How can I extract the bounced emails from the list of sent email addresses?
In other words I want a list of clean, sendable email addresses.
View 10 Replies
View Related
Nov 18, 2013
My query is , I require the UCF column for the ID having maximum number (last five digits) of UCF column for the respective year column values
IDUCF Yr
559589876543212610007971212
559589876543212610000333712
559589876543213610004703013
563829876543212630000323912
My answer should be like below (or) having an additional column saying Active/Inactive.
IDUCF Yr
559589876543212610007971212
559589876543213610004703013
563829876543213630004703113
563829876543212630002782312
View 1 Replies
View Related
Jul 30, 2013
I am trying to extract data from a website:
[URL] .....
I looked at the source code of the website and realized that if you notice (above) that the variables listed in the link (i.e year, month, day) are exactly what i need to change in order to get the data for a specific date. how can I accomplish this using VBA. so say I have in on an excel sheet year in column A, month in column B, and days in column C (time interval is constant so we don't have to worry about stime and etime). and i run the macro and it loops through each row taking year,month,day for all rows and saving the data as .csv or xls files?
View 1 Replies
View Related
Feb 19, 2014
how I can extract data between two strings?
Example: My string is: -_creativename-_spongecell-_creativesize-_300x250-_creativetype-_spongecell-_
How can I create a column that contains everything AFTER 'creativename-_' and before '-_creativesize-_'?
View 11 Replies
View Related
Aug 4, 2014
I have created a table of data with Serial No, Name, Age & Common Friends field. Now i need to extract all the data (complete Row item) where the condition matches a certain criteria. Basically a formula or function which will say what are the names of people along with all other corresponding fields (Age & Common friends) who have common friends as "Jill" or "Jack" (For example). Note : I cannot use filter option and copy/paste the filtered data in new sheet as i am working with thousands of data items. Due to the nature of report software/data extraction report, multiple data items appear in single cell only (Multiple friends name appear in single cell).
View 3 Replies
View Related
Jan 7, 2009
I have a problem with VLOOKUP not extracting the data I need from 1 workbook.
I want to populate 4 different sheets in the "108" workbook with data from the "1st" workbook. I've uploaded the workbooks to show the formulas I have already. The data in "1st" workbook changes daily and can have upwards of 2000 rows. I've simplified the list for the example.
In the "108" workbook I want to fill in the first three columns with the formula down to about row 500.
I've tried different formulas to do this using EXACT, MATCH, and VLOOKUP but to no avail.
View 9 Replies
View Related
Jan 15, 2009
I have a table of data on 20 employee performance stats for my department. It is in the format of col A names and corresponding values for multiple skills and performance data from Col B to M in rows. I have a worksheet for each employee within the workbook. What I would like to do is to be able to extract the individual row of data to each employee sheet. I have played with OFFSET but can't get it to work other than in a column..
View 9 Replies
View Related
Jun 18, 2009
I have table that has a list of agents (Colum B) and then corresponding appraisal dates; 3 Month (Colum C), 6 month (Colum D) and annual (Colum e).
What I would like to be able to do it to have something that looks at the table and tells me all the 'appraisals' that are due the same month we are in, and the date that it is due, as well as the 'agent' that is due the apprisal.
I have played with the INDEX MATCH formulas and also pivot tables but have not found a solution, is it something that is going to require VBA or is there a simpler solution?
View 8 Replies
View Related
Mar 25, 2008
Let's say 1 Feb starts on week 5, 1 Mar starts on week 9 and 1 Apr starts on week 14. As such, feb has 4 weeks and march has 5 weeks. I have a spreadsheet of data on a weekly basis, and i want the data from week 5 to week 8 to be under feb and data from week 9 to week 13 to be under march. The data is to make a graph. Is is possible for excel to be linked to the calander so as to detect which month has 4 weeks and which month has 5, depending on the 1st of each month?
View 11 Replies
View Related
Nov 5, 2008
I have many company-specific Excel files containing given data fields such as company name, company address, commodities supplied, etc. An example is attached here under the tab "Company Profile". I would like to extract all the information from the different "Company Profile" Excel files and put it into a more usable format, as shown in the attached tab "Results," where the company data runs horizontally across.
I tried to record a macro to do this ("CompanyProfile" -- included in the attached file), but I am not able to make it do what I want it to do. I also do not know how I may be able to capture the information in the "check boxes."
View 2 Replies
View Related
Feb 1, 2010
In one cell i have a dropdown. Depending on what is in that dropdown, i want a table of data to be written. I'm not too hot with pivot tables but my understanding is that is predominantly to do with counts. This is more of a multiple vlookup i guess. I want to pull from a list of data (3), all the cases matching the dropdown (1) and deposit into a list (2). What is the best way of doing this? I don't want to use filters. See attached.
View 2 Replies
View Related
Aug 4, 2009
I am using INDEX functions to extract up to 2 items of data which I now need to extend to upto 6 items.
The spreadsheet shows a list of staff initials and a day by day work rota of (M)ornings, (A)fternoons, (N)ights and (O)ffs. What I am needing to do is to identify only those staff who are rosterred Off and to place those intials in the two sets of colored cells in rows 5 and 7.
The attached spreadsheet, Tester1.xls shows the 2 existing INDEX functions in use. These can only detect the first occurrance of "O" and the next. I now need to be able to extend this functionality to cover all "O"'s in both section 1 and section 2. So, eg if 12 Aug is input to B15, I can only select IB and GG, but I now want to be able to see MG in the next blue cell.
View 3 Replies
View Related
Nov 9, 2011
[URL]...
This entire link is in one cell i would like the data Iowa_Health_System
What formula can i use
View 2 Replies
View Related
