The formula is working well. The problem is I get the result for the first column of error even if the error is in more than one column. I want the result should display all the errors with the column number 1, 2, 3 (or with column name A, B, C etc). The total number of error is not required. The exact columns which have the error should be displayed. For example if the error exists in 3, 4 and 5 columns, I should get the result as "345Error" or "CDEError".I use excel 2002.
I am using the following formula to find out the No. of "HH" in the range given and I am getting the results simply with numerical value as 2, 3 etc. I want the result should be displayed as 2HH, 3HH depending upon the No. of "HH" available in the given range. The result should be displayed as (the No. added with the text "HH").
I am trying to send emails using a table in Xl2002 via outlook2002.
The code below is from Walkenbach's VBA Bible for Excel 2003 and I am getting "Uesr-type not defined" error with the 1st Dim statement.
Do I need a different statement such as set OutObj = blahblah or similar?? I have searche dthe net hi & lo for a solution to this problem & I do have JW's excel VBA bible.
Sub SendEmail() 'Uses early binding 'Requires a reference to the Outlook Object Library Dim OutlookApp As Outlook.Application Dim MItem As Outlook.MailItem Dim cell As Range Dim Subj As String Dim EmailAddr As String Dim Recipient As String Dim Bonus As String Dim Msg As String
I am using excel 2002 and I have found that when the workbook is shared and getting 2 or more users to open the workbook around the same time brings up a read only type prompt box for the 2nd ( and 3rd) user when the book hasn't fully opened for the 1st user/is still fully opening. Is this a limitation within excel or is there a way around this for example via vb code.
I know the more data a workbook has can cause it open a lot slower but is this the same for shared mode.
I've got Excel 2002. I am devising a sheet for checking work (sheet A) which feeds onto a separate sheet (sheet B). If I wanted to delete info from sheet A can I retain the info on sheet B? I want sheet A to be used repeatedly for each case but the info for every case to be recorded row by row on sheet B.
I'm currently trying to set up a spreadsheet on excel, when certain documents need updating. Basically I have a column with the dates in that each document was last updated, I want the cells to turn red (fill colour) if the document has not been updated within the last 6 months and orange (fill colour) if the document has not been updated in the last 4 months. How do I do this?
I am currently using Excel 2002 and am on a Windows XP computer.
Excel 2002.I have data in columns A and B on sheet 3, starting at row 100. The total number of rows of data is variable (max is 50 rows). I want to take the values in A100:B100 and copy them from Sheet3 and paste values transposed to SheetTL Range C1:C2. I have started to write the following code but as you can see I will have to repeat the code upwards of 50 times. It seems I should be able to do a COUNT function to see how many rows of data exist and then somehow loop the code to copy the data from each subsequent row that many times, but how to put that together.
Sheets("Sheet3").Range("A100:B100").Copy Sheets("TL").Range("C1").PasteSpecial Paste:=xlPasteValues, Transpose:=True ActiveSheet.PrintOut If Sheets("Sheet3").Range("A101") = "" Then
I have a workbook in which there is a sheet containing a table.
Excel 2002ABC123Specific Gravity6 Volt ValuesSOC40.0000.000Dead 51.1345.97010%61.1485.99020%71.1626.02030%81.1766.06040%91.1906.10050%101.1976.12055% 111.2046.14060%121.2116.16065%131.2186.18070%141.2256.20075%151.2336.23080%161.2416.26085% 171.2496.31290%181.2576.32095%191.2656.350100%SOC Chart
From another sheet I query this table using the LOOKUP function to obtain values from column C such as 25% 60% and so on. A typical query formula looks like this:
=LOOKUP(B2,'SOC Chart'!B4:'SOC Chart'!C19)
It would be nice if the fill color came along with the value.
I found in an old file that i triggered the macro by clicking a button! I would post a pic but i don't know how. How do I activate a macro by clicking a shape on the excel 2002 page?
Basically, I have an excel spreadsheet with different valued items for example,
TV Essential l £15 TV Essential extra l £20
Broadband Essential l £ 8 Broadband Extra l £12
I have options for TV, Broadband and Phone. At the bottom of the spreadsheet I want three drop down lists to pick what TV, Broadband and Phone package I want. For example: TV Essential, Broadband Extra and Phone Weekend. I can create the lists but I was wondering if there was anyway where, as you select the option on each of the lists, a running total will be created. So when TV Essential is selected £15 is added to a cell, say F20. Then when Broadband Extra is selected another £12 is added to cell F20. And as you select different ones in each list the total in F20 changes.
I've got some code which some one posted me a link to on here which set up a pivot table on more that 1 sheets (using excel 2002).
I inserted this code into a rountine I do daily which works fine.
The problem Im having is that Im getting more and more info which I need to pivot over more than one sheet. So I was going to amend the rountine so It picked what ever sheets are in the work book to pivot.
At the moment I have to go into the code and name the sheets to pivot. Is there some code which can work out how many sheets that need pivoting and just do it with out naming them? and also just add a new sheet with the pivot on rather than having to name the destination?
I've posted the code i got given below and have highlighted the bit where I have to name the sheets.
I have columns of figures with times like 5:52:54 and next to them cells with values that i wish to format based on the time. that is if the time on the adjacent cell is before 8AM then make the value cell have a red border it does not have to be conditional formatting - Excel 2002 in win7/64
The situation is that I have 3 interest income from 3 different companies. Column B acts as a helper column to determine if a partner receives just one interest income or receives multiple interest income. If they receive multiple interest income, I want column B to display a 1 and if not make it blank. If you notice partners 5, 9, and 16 contain two or more interest incomes (Columns C - E). All the cells are have either an amount (positive or negative) or a zero. There are no blank cells. Columns (F - H) contains the interest income amount if only that partner receives just one interest income. So for those partners they should not display any of their amounts. The reason is because I am using a word template and currently have to use multiple templates ( 3 in total) to display correctly for each partner. I got this to work with a word macro that will collapse all non blank columns in a particular table. This might be on a ongoing project for me as I do have more logic to solve.
I am using Excel 2002 and have had a couple of files that seem to have become corrupted recently. When I try to open the files there is nothing there, no cells just a grey space where the cells should be. When I try to close Excel it asks me if I want to save changes when no changes have been made.
I had not made any changes to the sheets prior to this happening so am struggling to work out what is going on.
I have downloaded data from a system software in our lab that gives dates and other data. The problem is that teh dates are in some sort of text format so even if I change the format to a date format it still doesnt recognise it as a date.
The date format is in a 2 digit year format which is why the error is being recognised. I have over 50,000 line items with this issue so changing each individually is not an option.
Is there any way of altering these dates so that it recognises the year as 2013 automatically.
I have the formula =today()-g3 which works fine to let me know how many days a loan has been out. However when there is no date in column g i get #value! errors. Can anyone reccomend an alteration to the formula to avoid these errors showing up as they dont look great.
I need a formula that will check a few things and if it finds an error the word error will appear in the cell, the details of which are in the attached spreadsheet.
I have worked on this a great deal and cannot seem to make a formula with the proper logic. There is a sample of an error in the spreadsheet.
how i can search #N/A , #values error in a work sheet and replace with 0. i tried with find and replace dialague but it seems not recognizing error values.
I'm writing a piece of code that puts certain values in certain cells based on certain criteria. (Vague, I know.)
When the code gets to the part where it puts the first value in the first cell (in a loop), it inserts the value and then the code stops running. Even when I put in "On Error Goto Err" with a msgbox that contains the error description, the code just quietly stops.
Here is a simple macro I wrote to see if maybe the problem had anything to do with something specific to my code. This one fails too, for no apparent reason. Could my file be corrupted or something? What do I do about this?
Code: Sub rtest()
On Error GoTo err
Sheet2.Range("p4") = "test" 'code stops on first line, whether it is this one or the next every time. ActiveCell.Value = "test" ActiveCell.Value = "success"
I have a very long (> 2 hr) macro that sifts through thousands of files and creates a table of contents (more or less). Anyway, the macro will operate just fine when I am also working at the same PC but if I walk away for an hour, Excel will sometimes generate an error (application defined or object defined error). I believe that it has something to do with the PC going idle although it really isn't going idle because I turn off sleep and hibernate while running the macro. Also, there are only two locations where the error seems to occur. See below:
Code: Dim oApp As ObjectSet oApp = CreateObject("Shell.Application") Dim files As New Collection Dim fZip As Variant For Each fZip In oApp.Namespace(zipFile).items
I am trying to find some solution on frequent errors , that come up when one copy, or drag formulae. Sometime the error doesn’t appear on surface, but after digging you realize that some formula is not pointing to correct cells.
I want to create a macro which will do following things :
1. It will go to each cell in the selected range, and compare the cell’s formula with that of the cell on its right and left. 2. If the formulae are not similar it should change the color of that cell.
Basically, I am trying to catch logical errors. However I don’t know how to approach this problem? Is there any in-built functionality in Excel that can do this task ?
I have two columns that I want to compare - but one of them is the result of a VLOOKUP - so it may actually contain the #N/A error - how can I compare them so that:
if col 1 agrees with col 2, then "yes" is returned if col 1 does not agree with col 2 but the VLOOKUP in col 2 has NOT returned an error (so it's still a valid comparison) then "NO" is returned if col 2 shows a VLOOKUP #N/A error then "NO" is returned
or, perhaps more straightforwardly:
Col 1 = ABC, col 2 = ABC then return "YES" Col 1 = ABC, col 2 = DEF then return "NO" Col 1 = ABC, col 2 = #N/A then return "NO"
i would like an if macro to pick up if cell dest (i have used a case to define this cell) contains an error or more imoprtantly #REF! then change the offending cells to 0 and put up a message box to put "Check XTA". i have found some that i think may work but i didnt understand them (they had function in them :smask so i couldnt put them in.is there a way to put them in with out functions or could someone point me in the right direction.
