I need a formula that will check a few things and if it finds an error the word error will appear in the cell, the details of which are in the attached spreadsheet.
I have worked on this a great deal and cannot seem to make a formula with the proper logic. There is a sample of an error in the spreadsheet.
I am having trouble figuring out a way to get around this situation:
I have a to find the minimum in a range. I have used =Min(range)
However, i wish to exclude 0 values and n/a errors in the case no data figure in one or more cells of the range.
Could you please help me figure out a way?
My code here searches for a number from my (mActiveSheet) to see if it matches any number on my "Finanace" sheet. With this code, if the number on my (mActiveSheet) isnt on my " Finanace" sheet, then the proram gets a run time error 91. It happens when my SSRmatch is empty, and it blows up at the line of: If SSRmatch = SSRR, b/c my SSRmatch does not have anything in it. Can anyone help by not having it to blow up, and just move on to my code where if my SSRmatch is nothing?
Do Until z = LastRow
If SSRR "" Then
Sheets("Finanace").Select
Dim SSRmatch As Range
Set SSRmatch = Range("B5:B100").Find(What:=SSRR, After:=Cells(50, 2), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
'I have everything I need when it is equal to true:
If SSRmatch = SSRR Then
I have the formula =today()-g3 which works fine to let me know how many days a loan has been out. However when there is no date in column g i get #value! errors. Can anyone reccomend an alteration to the formula to avoid these errors showing up as they dont look great.
View 2 Replies View RelatedThe following formulas is showing error in some cells?
=IF(ISTEXT(PRONOSTICOS!G5), PRONOSTICOS!G5, "")
Is there a way of hiding the #N/A which is returned as a result of a formula, but keep the formula in a cell so it may be included in a sum?
View 4 Replies View Relatedhow i can search #N/A , #values error in a work sheet and replace with 0. i tried with find and replace dialague but it seems not recognizing error values.
View 2 Replies View Relatedhow to ignore errors when using DAVERAGE?
View 11 Replies View RelatedI am trying to find some solution on frequent errors , that come up when one copy, or drag formulae.
Sometime the error doesn’t appear on surface, but after digging you realize that some formula is not pointing to correct
cells.
I want to create a macro which will do following things :
1. It will go to each cell in the selected range, and compare the cell’s formula with that of the cell on its right and left.
2. If the formulae are not similar it should change the color of that cell.
Basically, I am trying to catch logical errors. However I don’t know how to approach this problem? Is there any in-built functionality in Excel that can do this task ?
I have two columns that I want to compare - but one of them is the result of a VLOOKUP - so it may actually contain the #N/A error - how can I compare them so that:
if col 1 agrees with col 2, then "yes" is returned
if col 1 does not agree with col 2 but the VLOOKUP in col 2 has NOT returned an error (so it's still a valid comparison) then "NO" is returned
if col 2 shows a VLOOKUP #N/A error then "NO" is returned
or, perhaps more straightforwardly:
Col 1 = ABC, col 2 = ABC then return "YES"
Col 1 = ABC, col 2 = DEF then return "NO"
Col 1 = ABC, col 2 = #N/A then return "NO"
In a worksheet the data (text or numerical) from five columns are compared using the following formula.
=IF($A10$G10,"1ERROR",IF($B10$H10,"2ERROR",IF($C10$I10,"3ERROR",IF($D10$J10,"4ERROR",IF($E10$K10,"5ERROR","-")))))
The formula is working well. The problem is I get the result for the first column of error even if the error is in more than one column. I want the result should display all the errors with the column number 1, 2, 3 (or with column name A, B, C etc). The total number of error is not required. The exact columns which have the error should be displayed. For example if the error exists in 3, 4 and 5 columns, I should get the result as "345Error" or "CDEError".I use excel 2002.
i would like an if macro to pick up if cell dest (i have used a case to define this cell) contains an error or more imoprtantly #REF! then change the offending cells to 0 and put up a message box to put "Check XTA". i have found some that i think may work but i didnt understand them (they had function in them :smask so i couldnt put them in.is there a way to put them in with out functions or could someone point me in the right direction.
View 4 Replies View Relatedthe following two statements return the error "Application-defined or object-defined error"
Code:
Sheets("Purchase").Range("PurchaseTax").FormulaR1C1 = "=IF(RC[-1]0,ROUND(RC[-1]/11,2),"")"
Sheets("Purchase").Range("FreightTax").Formula = "=IF(FreightCharge0,ROUND(FreightCharge/11,2),"")"
I have a formula I've been using for a long time which uses VLOOKUP to find results based on various reference cells, and then adds them up. To avoid errors caused by VLOOKUP not finding anything for one of the references I have also used ISERROR. The formula returns a blank if the calculation returns a zero.
I now need to bring further references in to the calculation but, using the format I have been, the formula is now too long. Here is my extensive formula:
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View RelatedDSee the attached.
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
The first 7 digit number is the input to a certain equation. This equation outputs the 7 digit number after the space.
Input (7146127) ==> Equation ( Unknown) ==>Output (2871082)
These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.
71461272871082
53820056426572
61070709150530
75833373805331
55466908456008
49264716615511
12387558353260
20013928484175
67975657084961
38006283229553
68973249414920
65179634653276
66971872613128
59646203411273
69785611400836
58284602307740
64723009925464
57930863495088
58816593932906
62736335606616
52119154778580
60043359437317
61921553996320
51507747216899
13197956063818
64210347411256
65399671193442
55656585589500
55148886441637
30850639587521
69081133766387
54139417804940
53408393698534
62310293191095
30512556590168
14514168265124
89078208134056
85177364363577
68714858216023
17584065849687
52691521917548
9840524785846
59268687494601
89374963791119
45989738961270
65040033345415
15061518946940
55392084949214
45103824265242
84181944909073
In cells BS8 I have the following =100*SUBSTITUTE(BR16,"metres","") to get centremetres from cell BR8 and in cell BT8 I have the following
=IF(BS8,ROUND('Under 6 Boys'!D11*(BS8-'Under 6 Boys'!E11)^'Under 6 Boys'!F11,0),"") I get a #Value error
I have also tried
=ROUND('Under 6 Boys'!D11*(BS8-'Under 6 Boys'!E11)^'Under 6 Boys'!F11,0)
In BT8 but I get same error
I have used it in another sheetsheet and it works I don’t understand why is is happening ...
I am using a combination of validation, vlookup and simple formulas to lay out a workorder. If I leave something blank in one of the feilds then everything that comes after say #n/a and won't allow the calculation to complete. Is there a way I can set a default value or something so to make calculate all the feilds that ARE filled in?
View 9 Replies View RelatedI have a workbook with data tabs (one shown here) and a summary tab. Essentially, one inputs hours for people in the Data tab (Tech) that are then calculated/summed to total $ based on rates I have hidden elsewhere in the workbook (not included). I'm trying to bring the subtotal lines (highlighted green) into the Summary tab based on which subtotal and what month/year it is. My formula works fine, except for the fact that it is returning a #Value! due to the "Hrs" heading for each Phase. I don't know why it's doing this because I've not run into sum array issues when mixing numbers and letters before. The error formula is highlighted in yellow in my attached sample, but below is a copy of the formula.
View 10 Replies View RelatedI can not get the following formula to work - I keep getting #Value errors and I've checked the fields and the values are correct
=SUM(IF(Input!$A$6:$A$4006=1,IF(Input!$I$6:$I$4006="DM",IF(Input!$K$6:$K$4006="Bid",Input!$L$6:$L$40 06,0),0),0))
My intension is that if A=1 and I=DM and K=bid then add the corresponding values in L and display. I can't figure out why this formula in another cell and works fine
=SUM(IF(Input!$A$6:$A$4006>0,IF(Input!$A$6:$A$4006<1,IF(Input!$I$6:$I$4006="DM",IF(Input!$K$6:$K$400 6="Bid",Input!$L$6:$L$4006,0),0),0),0))
it is just checking an additional condition of the value in column A
I am using a SUM function with multiple conditions as an array formula.
View 14 Replies View RelatedI am creating a spreadsheet which shows the date of when the training was cpmpleted. I have added an expiry column which gives the date 3 years from start date no problems. The trouble i am having is that the column will return an #VALUE when no training date is entered. ie: the person has had no training so no date can be entered.
I've been using some code I wrote at the start of March to open some files that I've created earlier in the day in order to add to them.
The code worked fine until the month changed. Here is the code I have to open the file I need.
strdate = Format(Now, "dd-mmmm-yyyy")
ChDir "C:DesktopTodays ReportsReports " & strdate & ""
Workbooks.Open Filename:= _
"C:\DesktopTodays ReportsReports " & strdate & "Date Report " & strdate & ".xls"
Since April 1st I have been getting a compile error saying I have the "wrong number of arguments or invalid property assignment".
I am at a loss as to why the code doesn't wok as nothing chaged between March 31st and April 1st.
Having a strange problem with vLOOKUP. Please see the attached file. The result is in cell M1 of the sheet (Link to the file below).
Vlookup works fine if the data is entered manually in cell H1, but with the formula it errors up .how i could make this work with the formula?
Sub indX()
For rwindex = 1 To 4
For collindex = 1 To 10
With Worksheets("sheet1"). cell(rwindex.collndex)
If Value < 0.001 Then .Value = 0
endwith
Next collndex
Next rw
End Sub
I have a code here and i have to spot what the errors are.
I know there is an error with 'endwith' but not sure what to do to fix it
What i'm looking to do is input a VBA command to comb the activesheet (which contains approximately 1400 rows, and 32 columns of mixed data and formulas), and determine if the text value "#N/A" appears anywhere on the sheet. If it occurs one or more times, i want it to set a boolean flag to true.
I know of ways to do so by setting a = countif(A:AG,"#N/A") formula in a cell, but unfortunately this is not my solution here, as it needs to be done before the formula is converted to text. A countif does not show a visible value of #N/A if its true value is a formula.
I've got a bunch of formulas that often are trying to divide by zero, hence this error in the cell. Is there an easy way to modify the forumla or format so that if a division by zero is attempted, the cell can show a zero instead of this error?
View 4 Replies View RelatedWhen I run a report, for some reason our system imports certain numbers which have errors, as a consequence when I try and do a pivot table I get a lot of returns showing #div/o!. If you look at the spreadsheet the errors start on line 103 sheet 2 and finish on 2631. Sometime the report can be huge and takes a while to go through these manually to convert to numbers.
View 3 Replies View RelatedI entered an activex object command thing.. and now I'm not sure how to exit out of it.. it just keeps alerting errors messages like reference is not valid and other ones depending on what I type in the formula box.
I just want to remove the object, but I can't get past the error alerts.. they just keep coming every single time I click somewhere on the workbook trying to exit out of it.. so I'm not sure how to even get out of it.. I don't want to open up Task Manager to exit out of the entire program because I didn't save my workbook.