the following two statements return the error "Application-defined or object-defined error"
Code:
Sheets("Purchase").Range("PurchaseTax").FormulaR1C1 = "=IF(RC[-1]0,ROUND(RC[-1]/11,2),"")"
Sheets("Purchase").Range("FreightTax").Formula = "=IF(FreightCharge0,ROUND(FreightCharge/11,2),"")"
i would like an if macro to pick up if cell dest (i have used a case to define this cell) contains an error or more imoprtantly #REF! then change the offending cells to 0 and put up a message box to put "Check XTA". i have found some that i think may work but i didnt understand them (they had function in them :smask so i couldnt put them in.is there a way to put them in with out functions or could someone point me in the right direction.
View 4 Replies View RelatedI'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies View RelatedI used the code below for Conditional Formatting. This works fine but the VBA-code crashes when I delete more than one selected cell. Is there a simple modification possible to prevent this from happening?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:C250")) Is Nothing Then
Select Case Target
Case 1
icolor = 6
Case 2
icolor = 12
Case 3
icolor = 7
Case 4
icolor = 53
Case 5
icolor = 15
Case 6
icolor = 42
Case Else
'Whatever
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
I am attempting to count how many cells have different values in a table while not counting the N/A's and 0's found in the table. From what I'm finding online, I see lots of formulas set up with frequency functions, but none of them are set up to exclude anything - just find unique values. I need to count the cells with values other than 0 and N/A going across each row and not count the same value twice
Here's an example of what the table looks like (the real one is over 1,000 rows and 50 columns) with column C being where the formula needs to go. I put what I would like to have returned in the cells.
C
D
E
F
G
H
5
2
N/A
N/A
0
43263526AF
324GFDS
[Code] ........
I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....
View 2 Replies View RelatedI want to set formula to cell S1 via vba.
This is the formula: =IFERROR(VLOOKUP(H3;'[VATCompanies.xlsx]1'!$A:$B;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$D:$E;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$G:$H;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$J:$K;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$M:$N;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$Q:$R;2;0);I7))))))
I have an existing code that runs almost flawlessly but I am running in to formatting cells error (or at least I think that is the problem).
For example, here is a line of code where my error lies:
If Worksheets(FirstSheet).Cells(Counter, ColtoMove) = MoveIf Then
'DO SOME ACTION
If I put my cursor on MoveIf it shows the expect number of 4500016239…….BUT it errors!
When I step through the code and go to the worksheet (or go to the left side of the = in the above code the data in the cell is “4.5E+09“.
I’ve attempted to change the formatting of this cell range to “Text” by the following With statement:
With Worksheets("CreateOrderFormsData")
.Range("AC:AC").NumberFormat = "Text"
End With
Note: if I verify the cells formatting after the above code is ran by rt click on the cell, format cells the Number field is set to “CUSTOM” and the Type: field is set to “TEXT”. Is this the problem? Please read on.
But that did not seem to do the trick…..actually if I now go to the left of the = again (which is now set to text) the data is “###########” in the cell, in the formula bar the number is the expected 4500016239 though but the CODE STILL FAILS!
Am I on the right track…..can anyone assist with this error please?
Sub CombineWBs()
Dim wb As Workbook
Dim newWB As Workbook
Dim i As Long
On Error Resume Next
With Application.FileSearch
.NewSearch
.LookIn = "C:Budget"
.Execute
Set wb = Workbooks.Open(.FoundFiles(1))
RenameWS wb
wb.Worksheets.Copy
Set newWB = ActiveWorkbook
wb.Close SaveChanges:=False
For i = 2 To .FoundFiles.Count
Set wb = Workbooks.Open(.FoundFiles(i))
RenameWS wb
wb.Worksheets.Copy After:=newWB.Worksheets(newWB.Worksheets.Count)
My code works well if the worksheet name is Sheet1. It will change constantly. I have alot of other similar workbooks that are not affected and cannot figure this out. Here is the code that I get the error at: ....
View 9 Replies View RelatedI have a workbook which includes a simple set of options on closing such as selecting the front sheet, restoring scrollbars and saving the workbook. To avoid problems with subscripts out of range I am using the ThisWorkbook statement to close the workbook.
This works fine and causes the workbook to close when close is clicked on any excel window. The problem is that excel falls over when it tries to resume closing the other workbooks. I am given (ironically) an error saying "excel has encountered a problem and needs to close". Does anyone know how to work around this?
My code is below:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Call Toolbars9(True)
With ActiveWindow
.DisplayHorizontalScrollBar = True
.DisplayWorkbookTabs = True
End With
how to supress the continue,end,debug, message when there is a vba error. The idea being that if there is a bug in my system that I have no realised, I don't want my end user seeing that message! I would preferrable design my own error message to appear instead.
View 2 Replies View RelatedI have a rather large workbook (30 sheets, 10MB) that has one worksheet with many INDIRECT functions in it (pulling data from the same file, different tabs). I am working to put simple code into the workbook to protect and/or unprotect all worksheets. I have gotten code to work to both protect and unprotect all the sheets, but when I run the unprotect code (see below), and then I go to edit the workbook, data from the sheet with many "indirect" functions temporarily "overwrites" the data on the active sheet (this is fixed when I scroll my mouse over the effected cells). I am developing this workbook for other users, so I'd like to fix this before sending it off to them.
This problem does not happen until after I run the following .....
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value
If UserInput > 1 Then
NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2)
Application.EnableEvents = False
Target = NewInput
Application.EnableEvents = True
End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
Can this error be avoided..?
I copied the sheet and redid the format. I renamed the original dashboard sheet from count to "keep" and named the copy after the original "count" Everything still works great - until i either hide or delete the original count which is now named "keep". I get an error at the red colored line below ".publish false".
I have attached an image of the error....
When I'm using the Macro recorder or even after I've completed a sequence is there a way to change the range so it code always covers the complete range of the data?
View 9 Replies View RelatedTrying to make a error checking macro (if field is blank, then erro prompt and change textbox backcolour to red). However, I have a lot of text boxes, and my current macro is
View 3 Replies View RelatedHere below the case:
List1 in Sheet1:
TEST1
TEST2
TEST1
TEST3
TEST8
List2 in Sheet2:
TEST1
TEST2
TEST3
TEST4
TEST5
I would like to know if it is possible to have in a single cell the information about the presence of an error in the List1, because a cell of List1 got a value that is not in List2.
I mean all cells in List1 have to contains the same values of List2. It is like a data validation. But it would be nice to have a single cell with "There is an error in your range".
I have the formula =today()-g3 which works fine to let me know how many days a loan has been out. However when there is no date in column g i get #value! errors. Can anyone reccomend an alteration to the formula to avoid these errors showing up as they dont look great.
View 2 Replies View RelatedThe following formulas is showing error in some cells?
=IF(ISTEXT(PRONOSTICOS!G5), PRONOSTICOS!G5, "")
I need a formula that will check a few things and if it finds an error the word error will appear in the cell, the details of which are in the attached spreadsheet.
I have worked on this a great deal and cannot seem to make a formula with the proper logic. There is a sample of an error in the spreadsheet.
Is there a way of hiding the #N/A which is returned as a result of a formula, but keep the formula in a cell so it may be included in a sum?
View 4 Replies View Relatedhow i can search #N/A , #values error in a work sheet and replace with 0. i tried with find and replace dialague but it seems not recognizing error values.
View 2 Replies View RelatedI wrote a very simple macro in an Excel file a few months ago. Worked great. Worked on my computer, and worked on a dozen other people's computers perfectly. Now, months later, ONE person is getting the error message 'Code execution has been interrupted' every time she runs the macro. I've tested it on my computer with Excel 2007, and it worked. Tested it on another computer with Excel 2003 (offending computer has Excel 2003), and it worked again. So I tested a third computer on Excel 2003, and it worked again. I'm 100% positive the macro code isn't causing this error. This makes me think that it's related to an application setting that was changed somehow.
View 5 Replies View Relatedhow to ignore errors when using DAVERAGE?
View 11 Replies View RelatedI am trying to find some solution on frequent errors , that come up when one copy, or drag formulae.
Sometime the error doesn’t appear on surface, but after digging you realize that some formula is not pointing to correct
cells.
I want to create a macro which will do following things :
1. It will go to each cell in the selected range, and compare the cell’s formula with that of the cell on its right and left.
2. If the formulae are not similar it should change the color of that cell.
Basically, I am trying to catch logical errors. However I don’t know how to approach this problem? Is there any in-built functionality in Excel that can do this task ?
I have two columns that I want to compare - but one of them is the result of a VLOOKUP - so it may actually contain the #N/A error - how can I compare them so that:
if col 1 agrees with col 2, then "yes" is returned
if col 1 does not agree with col 2 but the VLOOKUP in col 2 has NOT returned an error (so it's still a valid comparison) then "NO" is returned
if col 2 shows a VLOOKUP #N/A error then "NO" is returned
or, perhaps more straightforwardly:
Col 1 = ABC, col 2 = ABC then return "YES"
Col 1 = ABC, col 2 = DEF then return "NO"
Col 1 = ABC, col 2 = #N/A then return "NO"
In a worksheet the data (text or numerical) from five columns are compared using the following formula.
=IF($A10$G10,"1ERROR",IF($B10$H10,"2ERROR",IF($C10$I10,"3ERROR",IF($D10$J10,"4ERROR",IF($E10$K10,"5ERROR","-")))))
The formula is working well. The problem is I get the result for the first column of error even if the error is in more than one column. I want the result should display all the errors with the column number 1, 2, 3 (or with column name A, B, C etc). The total number of error is not required. The exact columns which have the error should be displayed. For example if the error exists in 3, 4 and 5 columns, I should get the result as "345Error" or "CDEError".I use excel 2002.
How I can create a simple formula to count unique values/text within a range of cells that contain duplicates, blanks and errors?
For e.g., in Column A (row 1 - 10):
Proj-001
Proj-001
Proj-002
Proj-004
#N/A
#N/A
Proj-007
Proj-002
i want to set the minimum to be 20 less than the minimum value in the data, and the max to 20 more than the max value of the data.
View 9 Replies View Related