Excel 2003 :: Cell Result Based On Range Of Filled / Empty Cells
Apr 3, 2014
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
View 4 Replies
ADVERTISEMENT
Feb 25, 2013
I keep record of my blood sugar in excel 2003 that I send to my doctor weekly.
What I would like to do is, instead of typing the readings and mmol/L at the end in every cell, is to just type in the reading (example 5.5) then tab of the cell and have excel populate the cell with mmol/L automatically after the reading.
Can it be done?
View 2 Replies
View Related
Sep 26, 2011
I am wondering if it possible to automate the copying of data from particular cells, based on a value in a different cell, into a different format.
So to go from this simplified table:
AB1NameLevel2Arthur2a3Briony3c4Catherine3b5David3a6Edward2a7Felicity3c8George3c
to something like this:
FGHI12a3c3b3a2ArthurBrionyCatherineDavid3EdwardFelicity
4
George
At the moment I do it all manually, and it takes forever. I am sure there must be a simple way of doing it. I am using Excel 2003, but could work in a newer version if required.
View 9 Replies
View Related
Jul 8, 2014
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
View 4 Replies
View Related
Nov 8, 2011
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
View 9 Replies
View Related
May 23, 2014
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
View 1 Replies
View Related
Jan 8, 2008
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
View 9 Replies
View Related
Aug 11, 2008
I'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).
I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.
Project Name - Valid/Invalid is B2-N2
View 19 Replies
View Related
May 6, 2009
I have a spreadsheet that has a bunch of empty cells that I need to fill in. Someone else needs to know which ones I have filled in after I am done. Is there a way that I can have Excel automatically highlight the cell after I put something in?
I know I could highlight the cell manually after I put something in it but if Excel can do this automatically for me, that would be the best as this is a very large spreadsheet and there will be many blanks to fill in. I am using Excel 2003.
View 9 Replies
View Related
Nov 17, 2011
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
View 5 Replies
View Related
Apr 18, 2008
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
View 3 Replies
View Related
Nov 5, 2012
I'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
View 3 Replies
View Related
May 16, 2009
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
View 4 Replies
View Related
Feb 5, 2012
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I uploaded the workbooks to filefactory.
OT Workbook: [URL] ......
Absent "Log" workbook: [URL] .....
Production Model: [URL] .....
View 1 Replies
View Related
Mar 6, 2012
I have a workbook that has 30 tabs in it. Each tab is a report card for students. What I'd like to do is create another tab with a button on it that when I hit the button it will search through each tabs range of D12:D40, D48:D76, D84:D112, D120:D136, J12:J40, J48:J76, J84:J112, and J120:J136. And if any of these cells has an MS in them then this new sheet I have created will list each students name which is in cell E5 and list what they recieved the MS for. This will be in the same row number but in column B. So if cell D12 has an MS in it then this report will list the students name and what's in cell B12.
Windows XP
Excel 2003
View 3 Replies
View Related
Aug 9, 2013
I have the following code, which I used to search Column A for a date and then copy the adjacent cell next to the date and paste it to sheet2.
However what I want to do now is be able to enter just the month or the year and the code will find the cells that contain the same year or month that I entered. I know to find a string value in a cell I can use InStr() however I don't know how to implement this into the code that I have, As depending on the month that I select I want the code to put the value in a certain cell.
Here is the code that I have so far
Code:
Sub SearchMacro()
DateSearch.Show
Dim LR As Long, i As Long
With Sheets("Sheet1")
LR = .Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
How I can do this by edited the current code or any code for that matter.
View 9 Replies
View Related
Dec 4, 2013
I have a worksheet which has various figures for each day of the week however I need to establish the weekly average of these figures.
Due to the way in which the figures are displayed, I am unsure how to use a formula which does not require a range with cells located adjacent to one another.
I have attached a test sheet as an example. The cells in yellow require the formula and I need a weekly average for criteria 1-3. This formula also needs to be compatible in Excel 2003
Test Sheet.xls
View 3 Replies
View Related
Aug 7, 2009
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies
View Related
Feb 17, 2013
I'd like to shade a range of cells based on a particular cells value.
Specifically:
If cell E3 is JUNE then I'd like the range of cells from B10 thru I10 to be shaded.
If E3 is JULY then it would shade C10 thru I10....etc.
Excel 2010
View 9 Replies
View Related
Aug 16, 2014
Intend creating a calculator that shows me how much a certain hotel room costs at different times (seasons) of the year, for example I have a One Bedroom Budget Apartment (list of room types is extensive), I also have three seasons, low, S Hols and Xmas, so I have a sheet created and inserted drop down boxes for the RoomType, Season, and Number of days, I now have to insert a formula that looks for the three variables and inserts the cost (I already have this info on a worksheet)
TotalCost
RoomTypes
Season
Days
[Code].....
Also I am using Excel 2003 so no combo box option (that I can find anyway)
View 1 Replies
View Related
Nov 21, 2013
I am trying to perform a count against two ranges of data.Both ranges contain contain values (dates in my case).I am trying to perform a count where cells in column A have data but cells in column B do not.
Is there a way this can be done in Excel 2003? I have tried numerous COUNT and SUMPRODUCT queries but have not found a way to get this to work.
View 7 Replies
View Related
Jan 12, 2008
I would like to gray out or hide contents of a series or group of cells when a particular cell has a certain result. i.e. if cell A1 is <5 I want cell rows 5 thru 10 to be hidden or grayed out.
View 5 Replies
View Related
Nov 11, 2012
I am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
View 1 Replies
View Related
May 31, 2014
When I enter barcode X in cell A1, I want B1 to say supplier and C1 to say product name and D1 to say package quantaty etc.
And if I enter barcode Y in cell A2, I want B2 to say different supplier, and so on, hopefully you get the picture.
View 7 Replies
View Related
Feb 5, 2013
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
View 1 Replies
View Related
Dec 2, 2013
I am using Windows 7 and Excel 2010.
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID
Name
Program
PMT
SI ID
AC
Milestone
TCP Level
[Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
LEGEND
Earned Value Limits
Milestone
RED
Yellow
Green
Turquoise
Blue
M2-M3
2.15
M4-M6
1.66
M7-M11
1.26
View 2 Replies
View Related
Mar 20, 2014
I have a company with upto 5 products, and I have created a dropdown box where you select your product.
When I select product 1 i would need info on product 1 , when i select product 2 I need info on product 1 and 2 and continue. so for product 5 -i need info on product 1-5.
I tried to add all info on excel and tried to delete it one by one by deleting rows in excel for products but it does not work.
View 4 Replies
View Related
Feb 27, 2009
write this in VBA on the Workbook Level, "ThisWorkbook" : IF range (B20:B53, E20:E53, H20:H51) are all filled through user keypunched values--checks and coupon amounts.AND range (C20:C52, F20:F52, I20:I50) are equal to = " "
-- these ranges contain formula that spits out values only when there are discrepancies with the manually keypunched values above' otherwise it's equal to " ".THEN call batch02. batch02 is a macro that prints the specified batch.I have attached the filed I am working with. There are 25 batches, hopefully I can replicate the codes by just changing the ranges and the print macro.
View 4 Replies
View Related
Jan 27, 2012
I am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.
I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.
I am using Excel 2010 and Vista.
View 1 Replies
View Related
Apr 24, 2012
I'm trying to make a macro in Excel 2003 to create x amount of named worksheets that are a copy of a different worksheet.
1. I have a main worksheet that will have a number manually entered into a cell (lets say A1);
2. I have a 'template' worksheet;
3. I'll assign the macro to a button on the main worksheet
If I enter '10' into cell A1 of the main worksheet, I'd like to click the button and have Excel create 10 copies of the template worksheet. These new worksheets should all share the same name with a number after them (ex: banana 1, banana 2..... banana 10).
View 2 Replies
View Related
