VBA On Error Cut And Paste Row In A Range - Move Lines Up And Continue
Oct 13, 2012
I am looking for some example code that when I get an error using workbook.open, because a file is corrupt, I can cut from the list and paste into a range to show that file had errors, then delete that row and continue.
For example
My list:
Column A Column B Errors List Error
File path B and name Information File Path A Information
File path C and name Information
File path D and name Information
I can cut and paste File path C into an errors list, then delete the row A and B and shift the below lines up.
View 1 Replies
ADVERTISEMENT
Feb 3, 2010
I'm having a toughs time with what I thought was a simple task. I need to cut and insert/paste a range of cells and then repeat in a loop. Explicitly, I have 3 columns with 2990 rows. Every 46 rows is a 'group' and I want to cut each group and paste at the top of the sheet so I have only 46 rows and (2990/46*3) 195 columns. I need to preserve the order so that the group at the bottom becomes the rightmost group........
View 5 Replies
View Related
Aug 30, 2009
how can i continue adding the numbers even if in one cell got an error value. Sample:
a1=5
a2=5
a3=#div/0! (this could be #name!, #value!, etc.)
=sum(a1:a3) returns #div/0! but i want it to return as 10. any clarification n how to do this?
View 3 Replies
View Related
Jan 27, 2013
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
View 2 Replies
View Related
Mar 11, 2014
I can't figure out whats wrong with this code:
[Code] ......
Its give me error 1004 on this line:
[Code] ........
Its copying the data just fine, but its having issues with pasting it. The data should be pasted into the same corresponding columns (so also starting in A Column), in the next available row (in Column C from row 2 on).
View 3 Replies
View Related
Oct 28, 2009
I have a report that has thousands of lines... debits & credits. Most of them offset one another, 0 balance. However, there are still many w/ missing credits that need to be identied. Instead of going thru 10,000+ lines to pull out lines w/o credits - Is there a way that I can cross check the amount between lines (1&2, 2&3, 3&4 etc etc) and if their total is 0 then I want to move them to another sheet (Matched)?
View 6 Replies
View Related
Jun 19, 2009
I have this macro that does an autofill in Column A depending on what is in Column B, however the rows are going to increment frequently. Column B has repeating numbers but they are not all even amounts. So column B can 1,1,1,1,2,2,2,2,2,3,3,4,4,4,4,4,4,4,4,5,5, and so on all the way down. The code will identify when the value changes to something new and in Column A will start numbering from 1 to whatever until it recognizes that a value changes in Column B.
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Columns("C:C").Select
Selection.Cut
Columns("A:A").Select
ActiveSheet.Paste
Columns("C:C").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("A1").Select..............................
The problem that I have is in bold with the range. I need it to continue until it recognizes the last cell in the column that has a value and stop.
Right now it will work but only until row A6391 for my first sheet however these rows will increase over time. I'm using Office 2007.
View 9 Replies
View Related
Mar 16, 2009
I have a problem that i don't know how to solve. I have one cell with values like this: 127;71;512;458;1250;722;2154;742;29;350;
and what to put in lines like this:
127
71
512
458
Has i have a lot of data in the cell and everyday it changes, i take several hours doing it manually. I have tried using the command data/ text in colluns but because i have huge data it leaves a lot out. Do you have any idea how to put that values in lines automatically?
View 4 Replies
View Related
Jun 9, 2014
Basically I want to copy and paste all data in a row if the value in a cell is equal to something
I am currently using the below formula
The Value in red = Set tgt = ThisWorkbook.Sheets(Criterion.Offset(, 1).Value 'Pick the cell next to the cell containing the criterion).
But my issue is now that i will need this to work based on 37 values and having this macro 37 times with the value changed and 37 buttons will be difficult.
So I am looking for a way i can add multiple values each going to separate sheets.
View 14 Replies
View Related
Jan 29, 2014
This script is resulting in:
Run-time error '1004'
PasteSpecial method of Range class failed.
[Code] .....
It highlights
[Select Code] .....
when I hit debug.
View 2 Replies
View Related
May 7, 2008
I need to paste the first 10 lines of every page with a header.
I do not want to use a header, I want to designate every page to copy the first 10 lines from the first page and add those 10 lines. The "header" can not overwrite current data but needs to push it down 10 lines.
View 9 Replies
View Related
Aug 23, 2012
I'm looking for a way to write a macro to insert 5 lines at the end of the data in column A. Then I want to copy a range into the newly inserted lines. I would press a button anytime I need this to occur.
Current last line of data A39
Need to insert 5 rows after A39
Then copy range BA30:CB34 into the newly inserted rows.
View 4 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Feb 7, 2007
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
View 6 Replies
View Related
Sep 21, 2013
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
View 4 Replies
View Related
Dec 12, 2011
I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
View 1 Replies
View Related
Jul 24, 2014
Macro, which can cut/Paste from sheet "Pastin" to Sheet "Robot".
The input in sheet Pastin is veritical and the the result is in a row horiontsal.
There can be no references between the names for the columns or rows, only the cell to move.
I would like it to be so when I run the macro it example move it to sheet robot from row A3, and if I do again it make the next one from Row A4.
What I want to move can be seen in below.
Cell on the left is sheet "Pastein" and cells on the right is sheet "Robot"
Special is that one move have to be taken from on cell comma separated input, so it goes to sheet "Robot" for each text/number, between the comma.
I have attached a test sheet to work with also.
[Code] ...
Testmove.xls
View 6 Replies
View Related
Dec 29, 2006
I am trying to use a conditional macro to move data around in a spreadsheet. Is there a way to use an IF AND conditional statement in a macro? As an example:
Range Select ("M3")
' THIS IS THE LINE I AM HAVING A PROBLEM WITH
If Selection("M3").Select And Selection("N3").Select = "1" Then
Selection.Offset(6, -9).Select
Selection.Copy
Selection.Offset(-6, 0).Select
ActiveSheet.Paste
Selection.Offset(0, 1).Select
Selection.Copy
Selection.Offset(6, -1).Select
ActiveSheet.Paste
Else: Selection.Offset(0, 1).Select
End If
End Sub
View 9 Replies
View Related
Oct 18, 2013
I have a database that lets me add columns and do the required vlookups however, when I filter with a particular rule it throws the 'Cannot Move Objects Off the Sheet' error. Also, I cannot see any rows beyond row number 4316 - could this be the reason for the error?
Under 'Advanced' options, I've gone to 'Display options for this workbook' and chosen the 'All; option under 'For Objects show', however, I'm stick not getting anywhere
View 2 Replies
View Related
Jun 7, 2007
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
View 9 Replies
View Related
Jun 11, 2008
http://www.mrexcel.com/forum/showthread.php?t=323741
From the above thread I am using the following macro...
Sub MoveOver()
Dim MoveRange As Range
Application.ScreenUpdating = False
With Range("B1", Range("B" & Rows.Count).End(xlUp).Offset(, 21))
.AutoFilter field:=1, Criteria1:="=C&P"
On Error Resume Next
Set MoveRange = .Offset(1).Resize(.Rows.Count - 1).SpecialCells(xlCellTypeVisible)
On Error GoTo 0
.AutoFilter
End With
If Not MoveRange Is Nothing Then
MoveRange.Insert Shift:=xlToRight
End If
Application.ScreenUpdating = True
End Sub
I am getting an error 1004 message saying cells cannot be moved off of the spreadsheet. However, my last cell on the sheet is J28956.
Columns B through J contain data. Columns beyond J do not contain data.
Can someone give advice on getting the macro to work.
View 9 Replies
View Related
May 17, 2008
Does anyone know the maximum number of rows an autofilter can handle? I have a spreadsheet at work that started to crash at approximately 1500 - 2000 rows. The autofilter would give a weird error "Fixed objects may move" and then the filter would get rid of half the information and the filter arrows would show on a random row (rather than on the title).
I had heard a rumor that autofilter can only handle so many rows of data, but couldn't find where the cutoff point is. The spreadsheet is also shared between multiple people, so i'm sure that adds to it. And yes I know that Excel isnt' supposed to be kept open by multiple people and used as a database,
View 5 Replies
View Related
Jan 20, 2009
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
View 3 Replies
View Related
Jan 20, 2012
Designing very simple macro, it simply trims of some bits from the spreadsheet.
I paste special the trimmed cells over the top of the existing cells.
The macro works fine on my computer.
I took the code from my computer and put it on the other persons computer. The macro didn't work claiming issue with the paste special.
View 7 Replies
View Related
Apr 19, 2012
When I copy a cell with CTRL-C and paste elsewhere, a small clipboard pop-up appears to give paste options. The pop-up is the size of an average 'starter' cell. I find it a nuisance as it always covers a cell I might want to paste into, but I cannot see that cell anymore because of the pop-up. How can I get rid of the pop-up?
View 2 Replies
View Related
Mar 8, 2007
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
View 4 Replies
View Related
Mar 26, 2013
I have a table which is refreshed from a view on our SQL server. I use a part of this data further on and would like to automate the following: I would like to have a range set which I can use to loop through data. The range should hold the filtered data of table "PremiumTable", the columns "Grouping2", "Price", "Grower"
I have found a couple of posts giving the ability to create a range of visible cells and specific columns, but I wasn't able to combine this yet.
View 2 Replies
View Related
Dec 18, 2013
I am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
View 4 Replies
View Related
Feb 18, 2010
I have a large table in the final tab of my excel book. This table contains data such as Company name, contact details, etc but also a date which I must contact them on (this is nothing sinister, just a curtsy call following a job ).
The problem I am having is that I am running a vlookup on the first tab on a cell referring to todays date. This only brings shows one record which is the first occurrence of this date. This isn't very useful to me
The problems I need solving are:
I would like to be able to vlookup a range of dates (i.e. 7 days before or after todays date) - how do it do this?
I would also like to be able to return multiple results (i.e. if there is more than one company within that date range I would like them to show).
View 9 Replies
View Related
Jun 4, 2009
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
View 14 Replies
View Related
