I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.
I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.
I am looking to take information from a document emailed to me in word and then populate the specific ranges in my excel spreadsheet for invoices. What is the best method for doing this and how can i control where it comes from the position in the document and the range is going to.
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range) Dim Rng As Range For Each Rng In Target If Not Rng.Value = vbNullString Then Select Case Rng.Column
[code]....
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range) Dim avarSplit As Variant avarSplit = Split(Rng.Value, ";") Range(Rng, Rng.Offset(, 4)).Value = avarSplit If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
[code]....
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
My question, and it's my first one here, is regarding the use of ListViews in Excel forms. I need to populate it with a range of several columns with data from a spreadsheet.
What I'm tying to achive is to compare data on two worksheets called "Old" and "New" and to populate the difference on another worksheet called "Diff" see attached file where I have manually added the differences onto the "Diff" tab.
Currently I am working on a system uploading data from word(with what i think has a script) into a database one by one.(template of somesort) the data is stored into the database in word format.
can i place all the data in rows then get excel to transfer cell content into word and wait for it to upload then clear the contents(word) then do the next row(excel) until it did every cell that's filled? do i need any other applications for this one or can excel alone do it? i'd also like to add a new tab to excel for the command on when excel will do this.
I have word document. It has numerous feedback and review comments. I want them to be exported to excel work sheet in a specific column with the name of the feedback and comment provider in an other column.
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
I have an XLS file that gets data from an imported XML file. I need to apply some filters and then export it in a new XML file. I'm trying both "Development->Export" and "Save as->XML Data" procedures, but it always saves all data in the XLS document, not only the filtered. How can I obtain a new XML file with only filtered data???
We are using Excel and Outlook 2007 and 2010 in our office and this program needs to work with both versions of each, Excel and Outlook. I need to have a csv file exported from outlook to identify locations of meetings and when they occur. I can do this manually but it could be used at multiple times by different people
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
I would like to automate a word document that I have to fill out manually based on the info in a spreadsheet. I would like to be able to select a row that the data comes from as well. I have attached the spreadsheet and word document to this thread.
I am creating many tables in excel using a macro, and I want to copy them into a word document for later use. All the tables come from a long list, so for simplicity, they all get created on the same range starting at F1. Before deleting the existing table and adding the new one, I'm trying to copy/cut the table and paste it into a word document.
In case it makes a difference, I have office 2007
VB: Sub ExcelToWord(LastRow) Dim objWord As Word.Application Range("F1:F" & LastRow).Copy With objWord .Documents.Add .Selection.Paste .Visible = True End With End Sub
I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
I have everything else like it is supposed to be, but in one cell a word is broken. I have tried everything and gone back through the tutorials. Excel 2007.
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
I have a 2007 Excel spreadsheet (saved as .XLS) with worker names in column A and error types in column B. Column B can have multiple entries (which are sometimes duplicative of each other) separated by a hard return.
What I need to do is run tallies to determine the number of errors by type for each person, counting the value every time it appears, even if it is more than once in a particular cell. The ultimate goal is to generate a formula to track the number of occurrences for all error types types for the person in Column A (i.e. one formula each to track ABC's Procedural errors, ABC's Technical errors, ABC's Admin errors, DEF's Procedural, etc) though ideally I just need a formula to calculate any one of those and I can edit it to get the rest. Here's a sample screenshot:
The COUNTIFS formula is where I started but that only seems to count cells with the value as opposed to occurrences of the value. I did find this formula in my searches but it doesn't seem to work:
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
I am using excel 2007. My issue is i have a front sheet that I want to list all my tasks due within five days of the day of the month the spreadhseet is opened.
All the tasks are on two different excel sheets though and one of them i update with different tasks 2-3 times a week.