Excel 2003 :: Copy Worksheet To Word Document
Mar 30, 2014
I'm trying to copy parts of a worksheet from excel 2003 to word 2003. I've found code that does this alright but I need to be able to re-size the the pasted data to fit the word document. Is there a way to set the properties of the word document like change it to landscape and move the margins etc? Even a simple "reduce the table size to fit the word document". I've included the code i've got already. This code will open up a word document and copy your cells into it but without any useful options. So its ok for a small group of cells.
View 1 Replies
ADVERTISEMENT
Jan 28, 2011
I have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
View 1 Replies
View Related
Nov 29, 2011
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
View 4 Replies
View Related
Aug 4, 2007
I have been looking for a while for a code to copy cells A1:D23 on a sheet and open a Word Document and paste these onto a document and Save this as the name shown in Cell C1. Everything I see to find is over complicating what I need.
View 6 Replies
View Related
Apr 8, 2009
If possible could someone please tell me why the below code is not calling the normal.doc macro "testy" and any solutions.
The code opens a new document, pastes the text from the clipboard and then fails to run the wanted macro.
View 6 Replies
View Related
Jan 25, 2010
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
View 8 Replies
View Related
Feb 16, 2012
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
5
Test
8am-2pm
Test
5pm-10pm
View 5 Replies
View Related
Oct 25, 2012
Is there a way to scan a document into excel 2003 and be able to keep the current format ? or some way to be able to get it into excel and the easliy put it back to the format I need?
View 2 Replies
View Related
Aug 27, 2010
I'm trying to create Word documents (letters.doc) from Excel fields.
I already created bookmarks in Word and have the same Titles in A Row in Excel 2003 and I have tried the following threads:
Add bookmarks to Word from Excel Inserting data values from Excel into a Word doc using bookmarks
But I cannot manage it properly. I know that I need the code that goes on the lines of
Set WdApp = CreateObject("Word.Application")
rather than Set WdApp = New.Object
I cannot get Word to open a document! =(
It's basic letter creation, First_Name, 2_Name, Address_1, Address_2.. These have been bookmarked in Word and have exact same Titles in Columns A-D
View 9 Replies
View Related
Feb 20, 2014
I have an Excel spreadsheet that contains information for a Word document. It uses an elaborate macro to "substitute" unique codes in a starter document. At completion of the process, it goes through and delete all unused codes
The problem is that the codes are preceded by a "bullet" symbol.
How can I remove that orphaned bullet symbol. If the code is ". CtlCode10" (where the . is a bullet), then ALL need to be removed
View 2 Replies
View Related
Jul 10, 2012
I use an excel workbook that contains around 20-30 output tables/ranges and i would to have a macro which will enable me to open a specific word document and paste these tables/ranges from excel into the word document. I am unsure as to how to get excel and word to "talk to each other"???
To make things more difficult i would like to be able to set the paste location in the word document, and ideally i would the copy and paste function to be a normal copy and paste and not a paste special as the tables/rnage in excel have already been formatted correctly and column widths adjusted to fit the margin of the word document.
Currently I select the range in excel, switch to word and paste then continue until all tables/ranges are pasted. Not difficult but as certain calculations change these tables/ranges need to be re-copied and pasted to word which gets frustrating.
View 1 Replies
View Related
May 31, 2014
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
[Code] .....
View 1 Replies
View Related
Feb 15, 2014
I have word document. It has numerous feedback and review comments. I want them to be exported to excel work sheet in a specific column with the name of the feedback and comment provider in an other column.
View 2 Replies
View Related
Oct 14, 2011
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range
For Each Rng In Target
If Not Rng.Value = vbNullString Then
Select Case Rng.Column
[code]....
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range)
Dim avarSplit As Variant
avarSplit = Split(Rng.Value, ";")
Range(Rng, Rng.Offset(, 4)).Value = avarSplit
If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
[code]....
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
View 2 Replies
View Related
Nov 8, 2012
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
View 9 Replies
View Related
Mar 6, 2010
I want to take data from an Excel 2003 Worksheet as shown below:...
View 9 Replies
View Related
Nov 28, 2013
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
View 3 Replies
View Related
Feb 13, 2013
Using Excel 2003 and cannot copy a worksheet and am getting this error:
File not found: CDocumentTempVB4B.tmp
View 2 Replies
View Related
Jul 5, 2013
I am looking to take information from a document emailed to me in word and then populate the specific ranges in my excel spreadsheet for invoices. What is the best method for doing this and how can i control where it comes from the position in the document and the range is going to.
View 1 Replies
View Related
Jan 6, 2014
Part of my work involves the transfer of thousands of lines of Excel data into FileMaker and then exporting this data to Word where it is finally formatted for publication. What I'd ideally like is to skip the FileMaker step and simply have it so that I import all the data from my Excel file into a Word document in one swoop. The problem is that the eventual export can't feature tables, it would be the icing on the cake for the data to remain as formatted, and the data needs to read line<space>line<space>, vertically.
Essentially, I need to know how to take this from Excel ..
this1.jpg
And turn it into this in Word ...
this2result.jpg
View 4 Replies
View Related
Apr 16, 2012
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies
View Related
Jul 17, 2014
I'm trying to get certain Excel cells (varies by column and row) to populate different areas in a Word document. I've tried using both Word bookmarks and form fields and have defined the Excel names with the Word bookmark names as well as using Word's generic terms (Field1, Field2, etc.) with no luck. The VBA code I'm using now is for word forms and will open the Word document but seems to delete the form fields. I don't know if I'm not coding the cells correctly or what.
Sub CreateProposal()
Dim wdApp As Word.Application
Dim wdDoc As Word.Document
Set wdApp = CreateObject("Word.Application")
' Open word document
[Code] ........
View 3 Replies
View Related
Jul 22, 2014
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
View 1 Replies
View Related
May 26, 2006
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document.
For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document
'or
Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
View 2 Replies
View Related
Jan 23, 2014
All I want is to generate a word document with built in word header and footer (header and footer style name is "alphabet") based on the values which i mention in excel(path,word file name and header content.
View 1 Replies
View Related
Jun 18, 2012
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
View 1 Replies
View Related
Jul 6, 2009
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
View 2 Replies
View Related
Dec 1, 2005
I'm looking to simply delete certain words that are in cells, without having to delete rows, columns or the entire cell. I can use 'find and replace' and replace the particular word with a space, but I really want to delete the word. I'm using both Excel 2003 and 2000.
View 4 Replies
View Related
Jan 8, 2010
how to write a code where i can open Excel2003 file from Word2003 and delete data from Sheet1 and then close the excel2003.
All this is done from Word file.
View 9 Replies
View Related
Feb 13, 2010
I can select a MS Word 2003 Table from my Excel 2003 macro? I keep getting Error 438 as per attached file for the line of
View 2 Replies
View Related
