Extract Data From Word Document And Populate Ranges In Excel
Jul 5, 2013
I am looking to take information from a document emailed to me in word and then populate the specific ranges in my excel spreadsheet for invoices. What is the best method for doing this and how can i control where it comes from the position in the document and the range is going to.
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I would like to automate a word document that I have to fill out manually based on the info in a spreadsheet. I would like to be able to select a row that the data comes from as well. I have attached the spreadsheet and word document to this thread.
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range) Dim Rng As Range For Each Rng In Target If Not Rng.Value = vbNullString Then Select Case Rng.Column
[code]....
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range) Dim avarSplit As Variant avarSplit = Split(Rng.Value, ";") Range(Rng, Rng.Offset(, 4)).Value = avarSplit If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
[code]....
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
Part of my work involves the transfer of thousands of lines of Excel data into FileMaker and then exporting this data to Word where it is finally formatted for publication. What I'd ideally like is to skip the FileMaker step and simply have it so that I import all the data from my Excel file into a Word document in one swoop. The problem is that the eventual export can't feature tables, it would be the icing on the cake for the data to remain as formatted, and the data needs to read line<space>line<space>, vertically.
Essentially, I need to know how to take this from Excel ..
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
I have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
I have an Excel spreadsheet that contains information for a Word document. It uses an elaborate macro to "substitute" unique codes in a starter document. At completion of the process, it goes through and delete all unused codes
The problem is that the codes are preceded by a "bullet" symbol.
How can I remove that orphaned bullet symbol. If the code is ". CtlCode10" (where the . is a bullet), then ALL need to be removed
I'm trying to copy parts of a worksheet from excel 2003 to word 2003. I've found code that does this alright but I need to be able to re-size the the pasted data to fit the word document. Is there a way to set the properties of the word document like change it to landscape and move the margins etc? Even a simple "reduce the table size to fit the word document". I've included the code i've got already. This code will open up a word document and copy your cells into it but without any useful options. So its ok for a small group of cells.
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
I have word document. It has numerous feedback and review comments. I want them to be exported to excel work sheet in a specific column with the name of the feedback and comment provider in an other column.
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document Dim saveAsName as String
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
I'm trying to get certain Excel cells (varies by column and row) to populate different areas in a Word document. I've tried using both Word bookmarks and form fields and have defined the Excel names with the Word bookmark names as well as using Word's generic terms (Field1, Field2, etc.) with no luck. The VBA code I'm using now is for word forms and will open the Word document but seems to delete the form fields. I don't know if I'm not coding the cells correctly or what.
Sub CreateProposal() Dim wdApp As Word.Application Dim wdDoc As Word.Document
Set wdApp = CreateObject("Word.Application") ' Open word document
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document. For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document 'or Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
All I want is to generate a word document with built in word header and footer (header and footer style name is "alphabet") based on the values which i mention in excel(path,word file name and header content.
I have been looking for a while for a code to copy cells A1:D23 on a sheet and open a Word Document and paste these onto a document and Save this as the name shown in Cell C1. Everything I see to find is over complicating what I need.
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I am trying to have the calendar in the second tab of the attached excel file to auto populate based on info in the first tab.
In the first tab, there is the start and end dates of certain projects. The calendar will need to only show the project name of every project being worked on that specific day.
Some days will have more than one project being worked on, the Calendar will just need to list them all under that day. The Start and End dates count as days the project being worked on as well. We will also need the calendar to auto update whenever we modify the dates in the first tab or add/remove projects (rows).
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Me.Range("B2")) Is Nothing Then Range(Range("B2").Value).Copy Range("P2").Paste End If End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
I want to return the 7 letters of text that appears after the word Timer in cell A1. So cell A1 will be a sentence with the word Timer in it somewhere and I want to return the 7 characters after it appears.
How would I modify the below code to extract all of this data from multiple files? I have about a 1000 files that I need to extract all of the data from to manipulate in Excel.
Code: Sub ImportWordTable() Dim wdDoc As Object Dim wdFileName As Variant Dim TableNo As Integer 'table number in WordDim iRow As Long '