Excel 2007 :: Copy And Paste A Range Using Do Loop?
Jul 27, 2012
Here is my situation:
Background:
- Excel VBA 2007
- I have a macro that inserts a set of vlookups in range D3:D8.
- When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces.
- I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives:
- Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2()
' This macro inserts the VLookup into cell B2
Dim lastcolumn As Long
Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)"
Range("D3").Select
[Code] .......
View 1 Replies
ADVERTISEMENT
Apr 12, 2011
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
View 4 Replies
View Related
Jan 8, 2012
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
View 6 Replies
View Related
Mar 16, 2014
I have a workbook, in which from sheet1, I have to copy first row and paste it in another workbook in sheet1 This I have to do for all the rows present in first workbook. I have written code for one single row, but for all rows,
below is the code :
Option Explicit
Dim wbIP As Workbook
Dim wbJT As Workbook
Dim wbET As Workbook
Dim mypathET As String
Dim mypathJT As String
Dim mypathIP As String
Dim vals As Variant
[Code]...
View 1 Replies
View Related
Sep 30, 2013
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
View 6 Replies
View Related
Oct 23, 2013
With a macro to copy from the last entire row with data and immediately insert and paste to the row below in the active worksheet. I am using Office 2007.
View 9 Replies
View Related
Mar 8, 2012
using Excel 2007. I need a code to identify a worksheet within a workbook by cell/range value. The book is used by various users. They have the rights to add new sheets and all but delete columns in the 'master worksheet'. The sheet names can be changed by the user but I need to rename the master sheet on opening the file. To do this I have put a specific value in a cell within the master worksheet which then should allow me to find the sheet and rename it. (let say Range A1 has a value of "this sheet") I have a mental block on how i can run a loop to search each sheet for the identifying value until the range and value is found and the sheet identified
View 5 Replies
View Related
Jul 8, 2012
Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.
View 4 Replies
View Related
Oct 28, 2013
copy or cut then paste - paste grayed out in excel 07 tried several popular fixes from the web without luck.
Tried: the Excel repair and diagnose tool
Tried: uninstall / reinstall Excel program as well
Tried: go into Hikey - user - software - Microsoft - excel - new - 32 binary and tried adding new rule
Tried: Close Excel.2. Go to C:Documents and Settings[userID]Application DataMicrosoftExcel3. Delete the XLB file.4. Open Excel (the XLB file will be recreated - like the normal.dot) ------> This one - I could not find the XLB file - looked everywhere.
Tried: Open excel hit alt-f11 (to get to the VBE) hit ctrl-g (to see the immediate window) type this and hit enter: application .command bars ("cell").reset Then back to excel to test it."
View 3 Replies
View Related
Apr 19, 2012
Excel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").
I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.
Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.
View 2 Replies
View Related
Dec 2, 2011
Have a HUGE excel 2007 sheet of over 1500 rows that looks like this:
A1IDS09C1_PEND_COB2345678910IDS15C1_HIST_GATIL111213141516Sheet3
I need to get it to look like this:
A1IDS09C1_PEND_COB2COPY YES SHRLEVEL CHANGE SORTKEYS SORTDEVT SYSDA3BMCSTATS YES UPDATEDB2STATS YES UNLDDN
RU0014CONDEXEC YES UNLOAD RELOAD REDEFINE NO DELETEFILES YES SORTNUM 125DDTYPE WORK ACTIVE YES
DDTYPE SORTWORK ACTIVE YES6DDTYPE LOCPFCPY ACTIVE YES7DSNPAT
[Code] .......
In other words, I need to copy the text in blue so that it is above the text in black and the text in red so that it is below. Then I need the macro to repeat this procedure for each cell that it finds containing text in black. I have already created and run a macro to insert blank lines between each black text entry.
View 7 Replies
View Related
Aug 27, 2012
I need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
View 1 Replies
View Related
Mar 23, 2012
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
View 1 Replies
View Related
Dec 14, 2013
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
View 5 Replies
View Related
Dec 11, 2011
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
View 2 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
Oct 21, 2009
Need to create a simple loop, I have 50 cells (need to paste in lowest cell) - I need this to occur:
-Is cell A1 empty? if yes - paste
-some other stuff happens...
-Is cell A1 empty? no, is cell A2 empty? - paste
-some other stuff happens...
-Is cell A1 empty? no, is cell A2 empty?, no, is call A3 empty? -paste
View 3 Replies
View Related
Mar 27, 2014
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
Using excel 2010
View 4 Replies
View Related
May 21, 2012
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
View 2 Replies
View Related
Oct 11, 2012
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
=SUMPRODUCT(--($E$4:$E$10004=RIGHT(I$1,2)),--($C$4:$C$10004=$H3),$D$4:$D$10004)
View 1 Replies
View Related
Nov 12, 2013
I am having an issue getting an IF statement to work inside a DO loop. I have Microsoft Excel 2007 and Windows 7 Entreprise.
In my Excel spreadsheet, I have in column B a list of keywords and in column C the category to which each keyword belongs. For instance, the keyword "boot" goes withe the category "Shoes", "scarf" goes in "Accessories", etc.
In another column, I have a list of product descriptions (like "Black Boots" or "Silk Scarf") and I would like to assign the relevant category to each product. I thought to do this by creating a new function in VBA. This function would go through the whole list of keywords in column B, checking if the keyword is included in the product description. If it is, the function's result would be the relevant category, and if it is not, the function would search the next line in column B, until a relevant keyword is found, or until the end of the list.
Here is the code I have written so far:
Code:
Function SegmentSearch(Item)
Dim i As Integer
i = 1
Do
i = i + 1
If Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE" Then SegmentSearch = Cells(i, 3)
Loop Until Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE"
End Function
Without the loop, the function works fine (if "Item" happens to include the first keyword in the list) but as soon as I try putting the loop I get a #VALUE! error.
View 7 Replies
View Related
Dec 19, 2013
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
View 6 Replies
View Related
Jun 25, 2014
I do have macro which populates sheets based on given list.
I want to paste all data in newly created sheets from "Template".
I do not want to loop 2 sheets ("DATA" & "Template").
Data must be pasted with format & validation. Validation exists on Template sheet only. No other sheet is referred for validation.
View 2 Replies
View Related
Nov 18, 2009
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
View 3 Replies
View Related
Dec 30, 2009
I m new to macro and I need to copy the data from 49 cells value which are
present in Two Rows to be converted into TWO columns and 48 rows
I have run a macro for this and I got
Sub Macro4()
'
' Macro4 Macro
'
'
Sheets("WRIGLEY011209").Select
Range("C1:AX2").Select
Selection.Copy
Sheets("Sheet3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Range("A1").Select
Sheets("WRIGLEY011209").Select
Range("A2:B2").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet3").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("A1:B48"), Type:=xlFillDefault
Range("A1:B48").Select
End Sub
View 9 Replies
View Related
Feb 15, 2007
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1()
With Worksheets(1).Range("Product")
Set c = .Find("OK", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3")
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I also attach the Excel spreadsheet called Product Macro.xls
View 4 Replies
View Related
Mar 29, 2007
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
View 8 Replies
View Related
May 18, 2007
i have this code
Dim UltFila As Long, i As Integer, k As Integer
UltFila = Range("A65536").End(xlUp).Row
k = 2
For i = UltFila To 2 Step -1
If Cells(i, 2) = 4102 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If
If Cells(i, 2) = 4104 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If ..................
View 9 Replies
View Related
Sep 24, 2013
I'm trying to loop through worksheets as follows:
If ws.Name "DataTable" And ws.Name "Summary" Then ws.Activate
code to do some copy/paste stuff ....
Next ws
Try as I may, I can't get the code to skip the worksheets named "DataTable" and "Summary". Based on other posts, I've tried swapping out the And for an Or. Also tried using LCase(ws.Name), to no avail. Note that I'm acually trying to skip several other sheets as well but only listed two here for simplicity.
I'm using Excel 2007.
View 4 Replies
View Related
Jan 16, 2014
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
View 5 Replies
View Related
