Excel 2007 :: Cmd Next / Previous Button On Userform?
May 20, 2014
I ma using exel 2007 and I tryed to use this codes,I need faster to finish this project
Soo I have done only 2 buttons OK and Close the tab works like this I CLICK "Kerko" and then I write the name that I want to search in my Phonelist and when I click Ok it shows me his surname his telephone name and his City prephix
But the next and previous button I cant make them work,soo when I have to click next the name down the name that I first wroted will apear with his surname telepphone name and city prphix,and when I click prevoious will happend the same think but will not apear the next persone but the previous.
View 1 Replies
ADVERTISEMENT
Jan 10, 2012
I'm trying to work with a user form with a customized SUM button.
What I want is that the user can select a range and then press SUM and it will sum (and store) the range and then the user can click another button to place the sum in any other cell.
Here is the code I have on the SUM button but it fails
Code:
Private Sub CommandButton1_Click()
MsgBox (Application.Sum(ActiveWorkbook.ActiveSheet.Selected))
End Sub
I'm using a userform1.show vbmodeless so the user can click off the form. I tested it being able to work cross workbooks and sheets and I could see where it was returning the activeworkbook/worksheet but I don't understand the range/selected part.
Excel 2007
View 6 Replies
View Related
Feb 19, 2013
I'm creating an excel document that tracks the amount of time someone has (in months) in the program. Certain residents are able to 'fast track' if they meet conditions, and I am trying to create this spreadsheet so that anyone who looks at it can tell who qualifies (and when).
The issue I'm having is with conditional formatting, because I don't know how to do it with mutliple conditions.
Column C is their previous time (months) in the program
Column D is their current time (months) in the program
Column E is their total time in the program (Sum C+D)
Coumn E is what I would like to format, based on the following rules set out in the program manual:
If previous time is 9 months or more, a resident is eligible to fast track after 6 months current time (format green).
If previous time is less than 6 months, a resident is eligible to fast track after 9 months current time (format green).
I understand that their is an odd gap - but these are the rules currently set out by the program manual, which is what I have to follow.
I'm using Excel 2007 - if that changes anything.
View 3 Replies
View Related
May 10, 2014
Windows 7, Excel 2007. a formula to find the next lowest sequential number within a group.
Here's an example data set, which represents transactions by date and category:
Col A is a user entered Date which will not be in chronological order (unfortunately a sort is not an option)Col B is a user entered CategoryCol C is a formula that gives the chronological sort order based on the date.
The formula in C2:C9 is =COUNT($A$2:$A$9)-(RANK(A2,$A$2:$A$9)+COUNTIF($A$2:A2,A2)-1)+1Col D is a formula to determine if the row is the first chronological transaction within the Category
The array formula in D2:D9 is =IF(MIN(IF($B$2:$B$9=B2,$C$2:$C$9))=C2,"Y","")
This might not be a necessary column, but can be used as a helperCol E is where I would like a formula to give the next lowest value in Col C for the Category in Col B (the order number in Col C for the previous transaction within the same category).
I have entered in the values that the formula should return in Col E in the table below
A
B
C
D
E
[Code]...
If the current line is the first transaction of the category, the formula should return the value in Col C for that line (so E2 would equal the value in C2, which is 2).
So the first part of the formula could be straightforward, using the helper column:
=IF(D2="Y",C2,
Here's the tricky part: If it's not the first occurrence of the category, then it should return the value of Col C for previous transaction (or the next lowest number in Col C that is within the same category).
E3 would return 4, since the previous transaction for Category A was line 9
C3 = 6, and of all the values of Col C for Category A (2, 4, 6, 8), 4 is the next lowestE4 would return 6, since the previous transaction for Category A was line 3 C4 = 8, and of all the values of Col C for Category A (2, 4, 6, 8), 6 is the next lowestE5 would return 1, since it is the first transaction in Category BE6 would return 1, since the previous transaction for Category B was line 5 C6 = 5, and of all the values of Col C for Catebory B (1, 5, 7), 1 is the next lowestEtc.
I'm thinking I need an array formula to find the minimum value within the category, where that value is less than the value of Col C in the current line. Just not sure how to write that...
View 9 Replies
View Related
Nov 26, 2011
I want to import data from 1 excel sheet to another sheet in excel 2007 by clicking the button which i was created through.
Developer>insert>forum control>button
View 9 Replies
View Related
Sep 26, 2013
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code].....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
View 3 Replies
View Related
Apr 19, 2014
I have managed to create a command button in excel 2007 that performs a macro upon a click. But, after re-opening the workbook, I am unable to right click on the button to recall the properties window.
View 2 Replies
View Related
Apr 19, 2012
See my file: [URL]
I've made a quick example file ( not as complete as my original file ) But they have the same code.
What i wat is the OrderNr. textbox in the userform to be filled in automatically. When customer 1 orders something new the OrderNr. needs to be 3.
So i've i click on the userform launch button ( command button 1 ) I get my userform with 2 textboxes and 2 command buttons What i press command button 1, i get a new form to select a customer.
Now the part that's missing:
If i press command button 2 i want the textbox of OrderNr. to be filled in automatically with a 3.But it has to be changeable. So if i hit backspace its empty again and i can type 4 ( or what ever ).
View 3 Replies
View Related
Sep 5, 2013
I have a file that contains detailed sales information for each sales person. It typically contains over 20k records and the managers find it difficult to look up their sales people.
Currently it is subtotaled for each sales person but there are about 450 sales people across the country and it's not easy to use.
I have seen other Excel files that use buttons and I am wondering if this might be the solution to this issue. In other words, can I create a button where the managers can just click it, key in their sales person's name and get at the records easier? If so, how does that work? How I could make this file more user friendly.
View 9 Replies
View Related
Aug 2, 2013
We just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] .....
If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] ....
I have to admit that this is the last item that I thought would break!
View 4 Replies
View Related
Aug 9, 2013
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
Is there an accepted practice for this?
View 4 Replies
View Related
Oct 25, 2012
I am using the following piece of VBA code in Excel 2007 to automatically generate an email when a button is pushed:
Sub SendEMail()
Dim Email As String, Subj As String
Dim Msg As String, URL As String
Dim r As Integer, x As Double
r = ActiveCell.Row
'Get the email address
Email = Cells(r, 3)
[Code] .....
The button to launch this code sits in cell AK7. What I would like to do is have the macro copy the email address present in cell E7 into the email address section of my created email. In addition I would like the reference provided in cell AJ7 to appear in the Message Subject part of the generated email in the format " RCS Reference contents of cell AJ7".
View 3 Replies
View Related
Dec 17, 2012
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
View 2 Replies
View Related
Jun 20, 2013
I already have a Macro button built that hides values in column A. The next step I am trying to perform is a custom sort on column B in this order "Backordered", "Sourced", Shipped", and "Received". Here is my code that I have so far but where to begin adding in code to make this button sort.
Sub Inbound()
ActiveSheet.Cells.EntireColumn.Hidden = False
ActiveSheet.Cells.EntireRow.Hidden = False
Application.ScreenUpdating = False
[Code] ........
Excel 2007/Windows 7
View 1 Replies
View Related
Jul 28, 2014
I'm trying to change a cell in a 2007 workbook but I'm getting this message:
"the cell or chart that you are trying to change is protected and therefore read only. To modify a protected cell or chart first remove the protection using the unprotect sheet command (review tab, changes group) you may be prompted for a password."
However, the unprotect button on the changes group tab is greyed out (the protect button is available though). The workbook isn't password protected and I'm not being asked for a password. What am I missing?
View 2 Replies
View Related
Dec 7, 2011
I'm trying to get a checkbox in a user form to prepopulate depending on what's in cell H5.
Here is the line of code that I need rewriting (in bold):
Sub Userform_Initialize()
LabelPolicyNumber.Caption = ActiveSheet.Range("B5").Text
LabelSponsorName.Caption = ActiveSheet.Range("D5").Text
If Application.WorksheetFunction.IsNA(ActiveSheet.Range("H5")) = True Or ActiveSheet.Range("H5") = "" Then CheckBoxHalifax.Value = False Else CheckBoxHalifax.Value = True
End Sub
H5 contains a vlookup formula, so depending on other variables it can either have a value ("Halifax"), an error (#NA) or be blank. I've
It seems Excel will only evaluate the first statement and ignore the Or statement, meaning when H5 is blank Halifax is checked off when I load the user form.
I'm working in Excel 2007 on Windows XP.
View 6 Replies
View Related
Dec 11, 2011
I am having difficulty writing code to insert a hyperlink from a command button on a userform.
I have set up a worksheet to be a data base for a lot of new files which are being created on a daily basis. The userform when activated asks the user to input certain information about the new file being stored in the data base (ie file name, date created, relevant project, description, who created it, etc). I have put a command button on the userform which I would like to activate the "Insert Hyperlink" menu so the user can then navigate to the location of the file being stored and have that hyperlink stored in a cell against the file when the "Submit" button is clicked on the userform.
I have read almost every thread on inserting hyperlinks with vba but none seem related to my needs. Using Windows 7 and Excel 2007
View 3 Replies
View Related
Feb 27, 2012
I've done this before in Excel 2003 but I can't seem to do it in Excel 2007 because the control isn't there in the additional controls list.
In Excel 2003 it was called Microsoft Office Spreadsheet 11.0 and when ticked gave an extra item on the control toolbox which allow you to draw an excel spreadsheet control into a userform.
It's not there in the VBE of Excel 2007 - How to do it in this version?
Screenshots of the additional controls screen in both versions: [URL]... [URL]....
View 2 Replies
View Related
Feb 6, 2014
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
View 1 Replies
View Related
Nov 14, 2011
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
View 1 Replies
View Related
Mar 6, 2014
I have to complete his worksheet but now I am in a memory blank. I have the code set up but I guess I have been staring too much at this code...
I have 2 workbooks... One if for data entry and the other one is for a report.
So workbook1: the user will insert information on sheet1 and click a command button that will transfer the information on the next available row in Workbook2.
Workbook2 is strictly for report purpose. So all information transferred from book1 will be in book2.
I need a way, in book1, to have my userform (already set-up) to search for the matching information in my book2 Column A and update the information from my Book1 sheet2.
I have it set up this way:
VB:
Dim wbArchive As Workbook
Dim wsSrc, wsDst As Worksheet
Dim rngSrc, rngDst As Range
Dim rngReqNo As Range
Dim strReqNo As String
[Code] .....
View 2 Replies
View Related
Sep 26, 2013
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
Code:
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code]....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
View 6 Replies
View Related
May 8, 2012
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
View 6 Replies
View Related
Jul 2, 2012
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
View 3 Replies
View Related
Jan 8, 2013
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
View 9 Replies
View Related
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
Aug 21, 2014
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
View 11 Replies
View Related
Feb 18, 2012
Im creating a template for a number of sheets and I want the hyperlink for my previous/next buttons (to move forward and back through sheets) to change based on cell values.
All my sheets are named as numbers ie '1','2','3' and so on
The name (and therefore number) of the sheet is held in cell E22 on each sheet.
The 'previous' button needs to therefore hyperlink to cell A1 on sheet (E22-1) and the 'Next' button to cell A1 on sheet (E22+1)
The 'buttons' I have though are arrows from Excels shapes and I dont know how to add code to them though to start the hyperlink.
Also if i wanted to reference sheet E22-1 etc in a HYPERLINK() function what is the syntax?
View 5 Replies
View Related
Nov 14, 2008
I am working within a workbook with many worksheets and I want the ability to go back to the previous sheet I was on (example - I am on sheet 23, go to sheet 16, I want to be able to have a button or link that takes me back to sheet 23)
View 9 Replies
View Related
Feb 23, 2014
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
View 5 Replies
View Related
