Using Microsoft Excel 2007, VBA
I am trying to display an error message if a range is missing '0' or '100', or is empty.
I figured out how to display error when the selected range is empty, but I cannot figure out how to find if a particular value exists within a range and return an error if there isn't.
I am trying to find a way to see if a range of cells contain (not exactly, just contains) the text in another cell.
For example:
A1 Fred Flintsonte 2012 B1 Barney Rubble C1 Barney Rubble
A2 Barney Rubble 2012
If a cell in range A1:A2 contains text in B1 (CASE INSENSITIVE), then C1 equals B1
I've tried entering this formula in C1, but it does not work:
=IF(ISNUMBER(SEARCH(B1,A1:A2)), B1, "")
how to find the source data range of a pivot table (that already exists) in Excel 2007?
View 1 Replies View RelatedAm working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
I have a table with names of employees in Column A, the data for each employee is written in columns B, C and D.
I'd like to be able to type in this data in cells E12-E14 and have Excel bring up all of the names in the table that are associated with this data, and preferably separate them with commas.
I'm working with Excel 2007, without VBA/Marcros.
Please see the example file: find_name_example.xlsx
I have several sheets I use for MI and most have similar amounts of data in, ie, a tab for each month with out 15-20 columns and upto 10,000 rows, then a couple of summary sheets with filtering and calculations in.
One of my sheets is currently 16Mb, when the others are about a third of that, with similar amounts of data.
Is there a way to find what is causing the extra space to be taken in this sheet?
Or does this seem about right for the amount of data?
I'm using 2007.
I'm running Microsoft Office 2007.
I have 2 separate tables.. both a list of contacts of sorts.
In one table I have a list of all my clients (table A), in the other I have a list of "preferred" clients (table B).
The contact details etc that are stored in table A are more comprehensive to those in table B.
Effectively, I want to search for all of my preferred contacts from table B and filter for them in table A.
Then ideally I will sort alphabetically and just cut and paste the details into my preferred client spreadsheet.
I had a look online and there was something about creating a "relationship" but I don't think excel 2007 allowed me to do it. I certainly hadn't heard of powerview or powerpivot that they were using!
If I have a cell which begins with a few spaces and then has a character, how do I use the find function to see how many spaces until some character is present in the cell. The * does not work with this.
Excel 2007
B
4
a
Sheet1
I'm running Excel 2007 on Windows 7.
I've got a crude code which searches for multiple alphanumeric data. The code is below:-
Code:
Cells.Find(what:="1kp", _
LookIn:=xlFormulas, _
lookat:=xlWhole, _
[Code]...
I want to make this code more efficient by searching for either 1kp, 2kp or 3kp in one process & 'doing the same thing' at one time. How do I achieve this?
Explained slightly differently, the code should look something like this:- Find 1kp or 2kp or 3kp. Then do something with the found results.
I am wanting to find rows that with unique values in the first column, and then take those rows and display them in a more readable format. The section titled input is an example of information that would be pulled from a query into Excel. The Desired Output section is how I would like the info to be displayed. If this is possible without VBA then that is even better.
Excel 2007
A
B
C
D
[Code].....
Why does this code no longer work? It gives me the error code Cannot find project or library and MyMsg = is highlighted in blue. This worked in 2003, but does not seem to like 2007 version of excel.
Sub Send2()
'This is the "Send to XX" button
MyMsg = "Did you remember to name and save this file to your computer?"
Response = MsgBox(MyMsg, vbYesNo, Attention)
Select Case Response
Case Is = vbNo
[Code] .....
I have two spreadsheets. one contains a master list of computer names. the other contains a list of computer names to be removed from the master list (exception list).
I need to go through the master list and remove any computer names that are on the exception list- for example, if 'computer1' is in the exception list, i have to find and remove 'computer1' from the master list.
The exception list is quite long, and I want to automate this process if possible. not sure how to achieve this.
I'm using Excel 2007 Standard.
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
In excel 2007 i have three sheets.
In sheet1 : Cell : "D3" : I have find out & show maximum date with two criteria (i.e. code & series) from all sheets.
Also in cell : "E3 : I have find out maximum date with two criteria from particular one sheet only.
I have mentioned comments in attach file.
In sheet name 1112 & 1213 : I have a lot of data approx 40000.
Column A : Invoice no
Column B : Invoice date
Column C : Code
Column D : oano
Column E : Name
Column F : city
Column G : distric
Column H : Series
In yellow highlighted cell i required formula.
Using Excel 2007 and conditional formatting, how would I find duplicates across all fields in the table, similar to the "remove duplicates" tool that in default mode selects all the fields or offers the option to select fields of choice. I need to look at all the fields.
I've tried concatenation, but only with a limited number of fields; larger amounts slow the process to a crawl. If my table is 10,000 records with 15 fields, what process would I use to highlight the duplicates. How about something in VBA?
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007
I've used the below, for example in Column E, the actual data starts in row 4, so I can't use the full E:E syntax:
=IF(ISERROR(INDEX(Data!E$4:E$65000,MATCH(9.99999999999999E+307,Data!E$4:E$65000))),
INDEX(Data!E$4:E$65000,MATCH("z",Data!E$4:E$65000)),
INDEX(Data!E$4:E$65000,MATCH(9.99999999999999E+307,Data!E$4:E$65000)))
The above basically checks for a number, and if fails (there could be #N/A, #DIV/0!, text, or Number-stored-as-text in any cell here), it checks for text. (the 65000 is arbitrary; we will never have more than a few thousand rows)
However this is not reliable--the main problem seems to be number-stored-as-text. And it's not possible for me to do the Paste-Special Multiply *1 trick to convert the numbers because this data is dynamically generated from a database--the user would have to do that every time the sheet opens.
Is there not some formula that simply says: "Give me the last non-blank cell after row 4 in column E, regardless of what type of data"? (Excel 2007)
We were looking at a list of about 100 FedEx tracking numbers, each 30 characters in length, in an otherwise blank Excel spreadsheet. All tracking numbers in column A.
I used the Conditional Formatting - Highlight Duplicates feature to find any duplicate tracking numbers. It highlighted numerous. We sorted the column smallest to largest to look at two duplicates back to back, but found that there were actually no duplicates. Excel was highlighting values that had the *first 25* characters the same, but it didn't matter what the remaining characters were. For example:
1234567890123456789012345XXXXX and
1234567890123456789012345YYYYY
were highlighted as duplicates of each other.
Excel only looks at the first 25 characters when analyzing duplicates (at least in this specific function). That in and of itself blows my mind. Tracking numbers seem like an abundantly common type of data, and to think that Excel would fail to analyze them in such a simple manner seems impossible to me.
It gets slightly more confusing though. If you back a character off the end of the values, it NO LONGER sees them as duplicates. So...
1234567890123456789012345XXXX and
1234567890123456789012345YYYYY
are NOT highlighted as duplicates while
1234567890123456789012345XXXXX and
1234567890123456789012345YYYYY
ARE highlighted as duplicates. So there's some funny business going on about values of the same character length. Maybe Excel first looks at character length before analyzing specific characters. If length doesn't match, it doesn't even bother to analyze specific character values. That seems like a very strange programming choice though.
I am using excell 2007 and 2010
I need to find the average numbers on sheet 1 column D. Column D contains numbers as well as Blank cells. The info will be presented on sheet 2 in a monthly view. In other words i need to ssearch awithin a date range and determin the average of those numbers. This works on some months but return a DIV/0 erro most of the time.
=AVERAGEIFS('2N Stats'!$I:$I,'2N Stats'!$E:$E,">=2/1/2011",'2N Stats'!$E:$E,"
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
I have a text box within a chart tab which is populated with text values from a worksheet within the workbook. That part works fine however i want to be able to achieve the following example:
Current Text: Component Name - Notes
if there are notes against the component name i want the name to remain in black and the notes to change to blue
Aim: Component Name - Notes
If there arn't any notes then for the component name and the "-" to change to a light shade of grey
Aim: Component Name -
There are 26 components, each on their own lines in the textbox so im thinking either a loop where the cell reference is variable eg. ("CY" & i) or using the .find with a variable.
My code so far is:
Code:
Sub Chart_Notes_NTCA()
Dim i As Long, j As Long, Counted As Long, Total As Long
Dim Ans As String, Notes As String
Dim Cht As Chart
[Code].....
Excel 2007 I have a spreadsheet of file boxes the keeps a log of boxes, contents, locations and shred dates. Currently figuring out when and which boxes can be shredded is a manual hunt, find, and then deal with it. I can use CF and Sorting but I have been looking at some search type functions to return a list meeting the requirements and trying to step my way towards that.
1st attempt. Was find out how many boxes meet the shred (before today) that have not already been detroyed. Column K is the Shred Date, D1 is Todays date, Column G is Status. Got this working good.
[QUOTE]]=SUMPRODUCT(--(Log!K2:K2136(lessthan)STATS!D1)*SIGN(LEN(Log!K2:K2136)))-(COUNTIF(Log!G2:G2136,"Destroyed"))[/QUOTE
My failed attempt came at trying to find the earliest shred date excluding those that have been destroyed. This is not really neeed but I was hoping it would get me closer to creating the list of boxes that meet shred that have not already been destroyed.
Note: Column A is the Box No. and the spreadsheet contains blanks as we continue to add file boxes to storage.
Below array formula find the highest box number used by each department.
Code:
=A4&"-"&TEXT(MAX(IF(Log!$A$2:$A$2136"",(LEFT(Log!$A$2:$A$2136,LEN(A4))=A4)*RIGHT(Log!$A$2:$A$2136,3))),"000")
I would like to create a list of boxes including Column A "Box no.", Column H "Location", Column K "Shred Date" for any box whose shred date is before today that has not aleady been labeled "Destroyed" in Column G.
I prepared a Pivot Table and then i add some data in it but now all data is not showed by Pivot Table.
I do all necessary things like refresh and all but unable to increase a range.
How to increase range for Pivot Table in 2007.
I have 4 different excel files in C:Reports (SupplierA.xls, SupplierB.xls, SupplierC.xls and SupplierD.xls) all with a page called "Summary" (like below) in a set range A2:F5.
Fruit
Monday
Tuesday
Wednesday
Thursday
Friday
Apples
2 4 1 7 8 Oranges
2 3 4 6 9 Lemons
4 5 6 6 6 Pears
1 2 3 5 5
I also have a summary excel file in C:Totals called "Supplier Totals" that has a summary page that I want to total up all my suppliers A, B, C and D (same as above A2:F2). How can do this in VBA?
I am using Excel 2007.
Excel 2007 is my version. I'm trying to build an array from a dynamic range. I will know the column letter and lastrow.I think I could do this via a FOR and NEXT routine but there has to be a more efficient way. Here is my inefficient code idea:
Code:
Dim orgctarray(65000) As Variant 'because I don't know how long the array will need to be
Dim cnt as integer
Dim startrow as integer[code]....
So as you see, technically, I need to take sheet1.range("B3:B" & lastrow) and turn it into a vb array (I don't want to copy the data to some hidden worksheet and do the work there)I'd also like to remove duplicates and sort orgctarray alphabetically after I have completed building it.
Secondly, I'm using Excel 2007.
In column B3:B367, I have dates for every day of the year. In column D3:D367, I have body weight for every day of the year. This gets filled in on a daily basis.
What I'm looking to do:
1. Find the first daily weight for the month.
2. Find today's weight.
3. See if today's weight falls within the specified month.
4. Compare the first daily weight of the month with today's weight.
I am able to accomplish #1 with LOOKUP, #2 with LOOKUP, and #4 with IF/THEN. For the life of me, I cannot comprehend how to do #3.
I would like to create a PDF file from a RANGE Name, excel 2007, attach it to MS Outlook 2007, Once in Outlook I will select the recipient, add some remarks and hit send. I can do this now with a workbook but not a range.
View 1 Replies View RelatedI am using the follwoing code which works as it is supposed to except that it does not remove the duplicate entries, almost as though the code skips that step. How can I fix this?
View 7 Replies View RelatedUsing Excel 2007, I'm trying to figure out (and not succeeding!) on how to declare worksheet and range - in order to:
input a formula to cell xfd1, then copy down to xfd2:xfd100 - and here's what I've been playing about with
Code:
Sub filldownxfd()
Dim src As Range, out As Range, wks As Worksheet
Dim sRangeName As String
Workbooks.Item(1).Sheets.Item ("Sheet1")
Dim example As Range
Set example = Range("xfd2:xfd100")
[code]....
Using Excel 2007.
I have shapes in 3 different rnages of cells on a cell worksheet:
R1 = $D$5:$D & lngRows (row=32)
R2 = $G$5:$G & lngRows (row = 51)
R3 = $M$5:$M & lngRows (row = 50)
I need to set the properties of the shapes in each range differently The shapes in R1 are Left + 46 But the shapes in the other 2 ranges need to be just left My problem is in this bit
Code:
'Set properties for each shape in ShapeRange
For Each sh In ws.Shapes
I need to be able to set properties for each range separately instead of the entire sheet. Full code below (only Range $D at the moment - works)
Code:
Option Explicit
Sub AddShape3()
'Purpose: Add small rectangles to database table/fields for
' brainstorming and documenting relationships and queries
'
'Resources:
[Code]....