Excel 2007 :: See If Value Falls Within Specified Date Range?

Jan 30, 2013

Secondly, I'm using Excel 2007.

In column B3:B367, I have dates for every day of the year. In column D3:D367, I have body weight for every day of the year. This gets filled in on a daily basis.

What I'm looking to do:

1. Find the first daily weight for the month.
2. Find today's weight.
3. See if today's weight falls within the specified month.
4. Compare the first daily weight of the month with today's weight.

I am able to accomplish #1 with LOOKUP, #2 with LOOKUP, and #4 with IF/THEN. For the life of me, I cannot comprehend how to do #3.

Highlight A Date Range If Today Date Falls Within That Range?

May 1, 2014

I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.

Determine If Date Falls Within A Range For Multiple Unique Lines

May 19, 2014

File A has patients with discharge dates over two years. Each patient may have multiple dates. Example:

Patient Discharge Date
John Smith 7/1/2012
John Smith 10/1/2012
Judge Judy 7/1/2013
Judge Judy 12/1/2013

File B has office visit dates for the patients. Again, each patient has multiple office visits. I need to be able to see which office visits were within 15 days of a discharge date. Example:

Patient Office Visit
John Smith 6/1/2012
John Smith 6/15/2012
John Smith 7/10/2012
Judge Judy 7/20/2013
Judge Judy 12/12/2013

Is there any way to note next to the discharge date that for John Smith the 7/10/2012 office visit was within 15 days of the 7/1/2012 discharge? And the same for Judy with the 12/12/2013 visit?

Excel 2007 :: Sum Cells Based On Date Range Input

May 28, 2014

I am using Excel 2007.

Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.

28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0

Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell

I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.

For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.

Excel 2007 :: Choose Date From A Range Of Dates In Column On Sheet

Feb 6, 2012

Excel 2007 Q: I have a combo box (ActivX) that I want to be able to choose a a date from a range of dates in column A on sheet 'Working Copy'. I want a cell to update with the number/position of the date when the date is chosen i.e. the first date in the range yields 1 the second date yields 2 and so on. I also want the date to be displayed in dd-mmm-yyyy format. I am able to get the cell to give the correct position of the date but the date reverts to five digit number in combo box. I can change the code to return the correct date in the combo box when the date is chosen but then the cell just returns 0.

How can I make it so that the combo box returns the correct date and the cell updates with the position instead of jsut one or the other?

Here is the code I am using

Private Sub ComboBox1_Change()
ComboBox1.Value = Format(ComboBox1.Text, "dd-mmm-yyyy")
End Sub
or
Private Sub ComboBox1_Change()
Sheets("Working Copy").Range("G1").Value = ComboBox1.ListIndex + 1
End Sub

Excel 2007 :: Date Filtering - Change Date Format Supplied By Date Picker

Apr 24, 2012

I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.

I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).

When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)

So my questions are:

1. Is this due to the formatting?

2. Is there a way to change the date format supplied by the date picker?

Count How Many Times A Given Date Falls Between Date Pairs

Aug 3, 2009

I'm trying to use countif or similar to show how many times a given date is between 2 dates (inclusive). Each row of the spreadsheet contains amongst other info, a Start Date and an End Date. If i've got 2 rows like this:

StartDate EndDate
01/01/2009 03/01/2009
02/01/2009 04/01/2009

I'd want to lookup 02/01/2009 and have it return 2 (02/01/09 falls between the dates on row 1 and the dates on row 2). To give some context, this is an export from a database containing staff holiday dates, and I'd like to be able to see how many people will be on holiday on any given date, given the start and end date of all holiday occurances throughout the year.

Date/Month :: Specific Date Falls In?

Feb 26, 2008

I have a column with dates populated(examp.Fri, 15 Feb 08)in it. In the next column I need to return the month and year (month,year format) this specific date falls in?

Excel 2007 :: Subtracting Date Of Hire From Date Of Termination

May 25, 2012

I am trying to calculate the length of time of employment. I am looking for a formula to subtract the date of hire from the date of termination.

My current example is:

5/24/12 - 11/3/10 = 568

There is a problem with my formula as the answer of 568 is currently meaningless. How do I convert this?

Using Excel 2007

Check If Date Falls Between 2 Dates

Aug 22, 2007

Let's say that i have a list of dates on column A. Then I enter a "Start date" in "B1" and an "End date" in "B2" What I want is to find all dates that falls between "start date" and "end date".

Index Match A Value If Date Falls Between Two Dates

Aug 8, 2014

I have attached a sample workbook which shows my desired output.

In E3 I need a formula to index B3:B60 and bring back the value where D3 falls between the dates in A3:A60

I have manually typed 46 into E3 as 15/05/2013 is equal to or greater than 13/05/2013 but less than 20/05/2013

Attached File : index match between dates FF.xlsx‎

Function To Show What Season A Date Falls In

Sep 21, 2009

I am trying to make a function which will take a date as input and display the season for that date. i.e. the input 1-Jan-1992 will return "Summer" (southern hemisphere seasons)

VBA If Date In Cell Falls Between Dates In 2 Cells?

Feb 6, 2013

I'm running a macro that pulls rows from a different spreadsheet based on certain criteria. I need to add an if statement that will determine if the dates in a column fall in between 2 dates specified in cells.

How To Calculate Week Number That A Date Falls In

Aug 6, 2013

Of the 52 weeks in a year, I want to know the week number that a date falls in, e.g. date - 05/08/2013 falls in Week No. 32. What's the formula to get this answer?

How To Check If Date Falls Between One Date And Another

Oct 31, 2013

I want to check if Date in field B2 (which is 25/10/2013) falls between 21/10/2013 - 28/10/2013 (Using UK date format, not sure if that's relevant). And apply that to all other fields in the column.

I got it to work using the Today() function, and Today()-7 but I can't get it to work with regular dates, and some of the checks I want to be able to do are from further back.

Check A Numbers In A Range To See If Any Of Them Falls Into A Particular Range

Jan 14, 2009

make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.

=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")

and if the any of the number fall into the range it will print the message, "Attachment is Required"

Vlookup Value That Falls Into Specified Range?

Jun 12, 2014

I have a list (a) with distances and another list (b) that gives numbers to certain distance ranges. For instance:

[Code] ...........

Now, if I have a value of 4.5 in list (a), I want to look up the respective zone. For 4 classes, this can be done with an if formula (=if(4.5>50;Zone 4;if(4.5>25;Zone 3;if(..and so on))).

What can I do if I have lets say more than 100 ranges with respective zones (ranges not of equal size) because an if formula will not be feasible anymore?

Count If Value Falls Within Range?

Nov 29, 2002

I'm trying to count, in a range of cells, how many fall between certain values, such as between 75,000 and 99,000. The array formulas seems the way to go, but it looks like it only accepts one condition not a range.

ActiveCell Falls Within A Specified Range

Apr 25, 2007

I want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.

Search For Value That Falls Within A Range

Oct 13, 2009

Example:

0000-0999 Cell a1
1001-1999 Cell a2
2000-2999 Cell a3
3000-3999 Cell a4

These are a ranges of values in a spreadsheet. I would like to be able to do a search or lookup for a number that I designate that falls within one of these ranges and it will direct me to the cell that my value falls within.

For example if I do a search for 1550 it would take me to cell a2 with a range of 1001-1999.

Not sure if this is too complicated for a formula and might need to use VBA.

Returning Dollar Value If The Posting Date Falls Between Two Dates

Mar 1, 2014

trying to get a specific value to appear if the value falls within two dates in which it was posted.

I have the following data
1/1/2014 in Cell AB2
\$1000 in cell M3
1/1/2014 in cell P3
12/1/2014 in cell Q3.

What I'm trying to do, if Value 1/1/2014 AB2 falls between 1/1/2014(P3) and 12/1/2014 (q3), then I want it to return \$1000 (M3), if it does not, then to post 0 or blank.

Countif To Count If Falls With In 90 Days Of Todays Date

Oct 29, 2009

What i have is a list of dates in a row. I want to set up a countif formula to count the number of date that fall with in 90 days of todays date. I'm planning on placing todays date in a cell in the upper left hand corner (cell A2) above the list of dates. This way i can just type in todays date and the spreedsheet will count the number of dates, in the list, that fall with in 90 days of the date i type into cell A2

Determining If Datetime Falls Within Start And End Date Times

Sep 25, 2013

I have been using this statement

if(and(c1>=a1:a144,c1<=b1:b144),"yes","no"))

And it just works for the first 2 values c1, c2 and doesn't fit for the others.

The case is i have more than one event at the same video and i need to confirm that no event was taken unless it is between start and end.

Here are some samples:

Start dtime End Dtime Event Dtime
16/09/2013 22:13:34 16/09/2013 22:14:18 16/09/2013 22:13:38
16/09/2013 22:15:57 16/09/2013 22:24:30 16/09/2013 22:16:02
16/09/2013 22:24:30 16/09/2013 22:33:49 16/09/2013 22:17:32
16/09/2013 22:33:53 16/09/2013 22:35:05 16/09/2013 22:19:02
16/09/2013 22:35:05 16/09/2013 22:39:57 16/09/2013 22:20:02

So as you can see there are more than one event between one start and end dtimes.

Determining If Datetime Falls Within Start And End Date Times

Sep 25, 2013

I have been using this statement.

if(and(c1>=a1:a144,c1

Return Data That Falls Between A Range

Mar 12, 2009

Dates
1/2/2006
11/29/2007
7/3/2008

Table:
Year Start Date End Date
2005 01/30/2005 01/28/2006
2006 01/29/2006 02/3/2007
2007 02/04/2007 02/2/2008
2008 02/03/2008 01/31/2009

For each "Date", I need to scan the table and find which "Start Date" and "End Date" range does it fall into and return the applicable "Year". For example:

1/2/2006 will return 2005
11/29/2007 will return 2007
7/3/2008 will return 2008

Locate Where Amount Falls Within A Range

May 20, 2012

I need a formula that will tell me which 'BPS' a person should receive based off of the count of loans closed (between 'Criteria 2' & 'Criteria 2.1' and/or the volume (total of 'Loan Amount')(between 'Criteria 1' & 'Critera 1.1'), whichever gives the person a the higher tier.

I have provided an example below. In the example John Doe should receive .01750 'BPS' because he closed over 1 million in volume. If, for example, John Doe closed 5 loans for 400,000, then he would receive .01600, since he met the criteria for the 2nd tier based off of # of loans closed.

The formula needs to take into consideration which 'Comp Plan' the person has, as well as the other criteria mentioned above.

Bitmap BRANCHBitmap COMP PLANCOMP PLAN IDCOMP PLAN TIERCRITERIA 1CRITERIA 1.1CRITERIA 2CRITERIA 2.1BPSSACRAMENTOSAC-COMP-A11\$ - \$ 599,999.99 020.01250SACRAMENTOSAC-COMP-A12\$ 600,000.00 \$ 999,999.99 350.01500SACRAMENTOSAC-COMP-A13\$ 1,000,000.00 \$ 100,000,000.00 61000.01600SACRAMENTOSAC-COMP-B21\$ - \$ 599,999.99 020.01500SACRAMENTOSAC-COMP-B22\$ 600,000.00 \$ 999,999.99 350.01600

[Code] .......

Sum All Of The Numbers If Today Falls Within The Range

Jan 12, 2009

If I have A1 ( and the rest of row 1) that equals a standard Date Period such as shown below, What would the formula to be to sum all of the numbers if today falls within the range, as well as sum previous ranges.

For instance, If today were 02/15/09, it would only sum A2
If today were 03/15/09 it would sum B2 as well as previous time periods (B2 + A2)
If today were 4/15/09, it would sum C2 as well as previous time periods (C2 plus B2 and A2)

A1........................................B1......................................C1
"02/05/09 - 03/02/09".............."03/03/09 - 04/01/09"............"04/02/09 - 05/05/09"
15........................................21......................................36

IF Cell Falls Within A Specific Range Then

Oct 28, 2009

I am half way through a Worksheet where I am using VBA to perform more than the measly 3 Conditional formats that excel offer. This is working fine but I am now looking into a way of reversing the formats if a mistake is made and the condition is removed.

To make this sound more straightforward it is a rota sheet. If I enter Holiday the cells interior turns pink, Half turns light blue, On Call turns green etc. If this is changed I need to change it back to the original formatting.

I have partly done this with a Case "" but the Rota changes colour with different teams so I need to have an IF statement in there that say if the Target Cell falls within this Range say A5:AF10 change to tan IF the target falls within A6:Af20 change to sky blue etc. Below is the code I have so far.

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim WatchRange As Range
Dim CellVal As String
On Error Resume Next
CellVal = Target
Set WatchRange = Range("A1:AF100")
If Not Intersect(Target, WatchRange) Is Nothing Then

Select Case CellVal
Case "Holiday"
Target.FormatConditions.Delete
Target.Interior.ColorIndex = 38
Target.Font.ColorIndex = 1......................

Return Value If It Falls Within Values In Range Of Cells?

Jun 12, 2014

I am trying to learn more about functions like IF(), AND() MATCH() and LOOKUP()... but so far I cant seem to get it right. I am actually trying to get a simple working formula that can take a value from the first tab and cross reference it with a table in the second tab to return another value in the first tab.

For example....

On the first tab/sheet named "Details", i have a list of people, an area of work they fall in and then a column named region that categorizes their areas of work into groups

A
B
C

1
Name
Area of Work
Region

2
Mr A
J
?

3
Mr B
6
?

4
Mr D
Z
?

5
Mr E
18
?

Then on the next tab/sheet named "Category", I have a table which lists the areas that belong to a region;

A
B

1
Region
Area

2
1
A-J. 1-6

3
2
K-P, 7-15

4
3
Q-U,W,Z,16-20

I have tried formulas like IF(AND(B2=Category.B2),"1","ERROR") but it keeps returning me "ERROR" when it should return "1"

Assignment Of Number Depending On Range It Falls Into

Jul 16, 2009

The number in cell M21 falls into one of the ranges from C4 to C15. A matrix number needs to be printed in each cell from N21 to N30. The selection of the number to be printed in column N (under Matrix Assignment) depends on the range it is next to in array A4:C15. For example (as shown), the correct number for cell N21 is 122 because 0.2626 falls between 0.24 - 0.2699, and Matrix 122 corresponds to that range.