Excel 2007 :: Format Multiple Charts In One Sheet
Apr 21, 2014
I can run this code successfully:
Code:
With ActiveSheet.ChartObjects("Chart 2").Chart
.Axes(xlCategory).TickLabels.Font.Size = 20
End With
But this code throws a "This Object Is No Longer Valid" error when it gets to the first .Axes line:
Code:
Sub ChartFormat()
'
' Format Charts macro
'
Dim ch As ChartObject
For Each ch In ActiveWorkbook.Sheets("Summary").ChartObjects
With ch.Chart
.Axes(xlCategory).TickLabels.Font.Size = 16
[Code] .......
I'm using Excel 2007.
View 1 Replies
ADVERTISEMENT
Nov 5, 2013
I'm a 2007 user. I am trying to conditional format a range of F1:J10, where F1 will be conditionally formatted relationally to A1. G1 is relational to B1. H2 relational to C2, etc., all the way down to J10 relational to E10. My conditional format formula in cell F1 is >A1*2 (will format F1 as orange). I want to be able to copy the conditional formatting over so the formula in J10 for example would be: >E10*2 (will format it orange).
I omit the "$" in the conditional format formula in an attempt to prevent it from being absolute. But every time I copy the conditional formatting over to the other cells, the formula within those cells remains identical to the formula in the original cell.
View 6 Replies
View Related
Jul 28, 2013
I have 23 Charts on a sheet which I place into a MS Word Doc. ATM all charts have borders, which is what one of my Managers like, however another Manger likes these charts without borders. I tried to record a macro so I could have this done by VBA (excel 2007) but it did not record the formatting. write a code to remove a border and and then add a border back in specifying colour, border styles (width etc). Say just for Chart 38, I can the just repeat this. But here are all the chart numbers in case you need them: 38,20,27,5,11,21,13,6,9,19,10,7,28,29,30,31,32,12,33,34,37,35 & 36.
View 5 Replies
View Related
Mar 2, 2014
I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?
View 1 Replies
View Related
Feb 4, 2012
I have two line charts in Excel 2007.
One chart has the values going down from upper left to lower right
The other chart has the values going up from lower left to upper right
Is there anyway to merge these charts to see if they intersect at all?
View 1 Replies
View Related
Nov 26, 2013
I've prepared an excel file (excel 2007) with some tabs that contains several charts (4 to 6 charts). When I want to print this file, the sheets with the charts on it doesn't print properly. I have set the print area to cover the charts only and then set it to fit on 1 page but the charts will not scale to fit.
I read somewhere that this is an excel bug - is there a workaround for this?
I could resize all my charts smaller but only as a last resort.
View 1 Replies
View Related
Jul 17, 2012
I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
2278.4058
[Code] ...........
View 9 Replies
View Related
Apr 18, 2013
I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
#123456
789
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
View 3 Replies
View Related
Jan 27, 2012
Using Excel 2007. Is there a straightforward way to do a waterfall chart?
eg. stacked bars running from left to right.
First Column = 2011 Headcount
2nd Column = stacked bar with additions (by category) - stepping up from the 2011 total.
3rd Column = stacked bar with reductions (by category) - steppind down from the first column + 2nd colum total.
4th column = 2011 exit (which will be at the same height as the bottom of the 3rd column).
View 3 Replies
View Related
Feb 23, 2012
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
View 2 Replies
View Related
May 23, 2014
I have an excel which creates PPT from the excel. but the graph pasted in PPT are not aligned and formatted.
By aligned, i mean re-size the graph and paste in a formatted fashion (currently they are overlapping each other)
My entire PPT created is off alignment and formatting. E.g heading are not properly aligned (they are touching the line below) and so on.
View 1 Replies
View Related
Mar 17, 2014
I have two separate data tables (with separate named ranges) and two separate pivot tables (the pivots each refer to the separate tables) all on the same sheet. For each of the pivot tables, I would like to have a separate pivot chart. In the pivot charts, when I click "Select Data", I find that the "Chart Data Range" for the pivot chart is grey (uneditable). Is there some setting that I need to toggle to enable the data source range so that I can change it? Also, when I try adding a new pivot chart to the sheet, this option is also grey/unavailable.
View 1 Replies
View Related
Aug 12, 2014
I am gaining an error in my code due to the sheet being protected.
I cannot seem to get the correct code to allow for the code to still run, while the sheet is protected.
[Code] .....
I tried protecting the sheet via:
[Code] ....
But I still get an error.
View 2 Replies
View Related
Nov 1, 2011
In Excel 2007, is there a way to format the top 3 values in each row of a pivottable?
View 1 Replies
View Related
Jan 21, 2011
I am trying to find a way in Excel 2007 to convert the date from US format to UK format, I tried to change it by using [right click=>Format cell=>Select Date=>Select the first option in Type:*14-03-01=>OK], but I doesn't work , the attached file are presenting the date in US format.
View 10 Replies
View Related
Feb 27, 2013
Is it possible to conditional format cells with formulas in Excel 2007. It used to be possible in Excel 2003 but I'm struggling to find this in the new version.
View 6 Replies
View Related
Jul 24, 2014
I am using someone else's old spreadsheet.
This spreadsheet uses a custom format of ##-##-## for a date such as 012214 prints as 1-22-14.
I need to convert this into normal short date format such as 3/24/2014 because there are four columns of dates in the spreadsheet and we have to do some addition and subtraction from one column to another.
I am using Excel 2007.
View 4 Replies
View Related
Feb 20, 2014
In Column D of my work book are a list of months, I'm trying to use conditional formatting to do the following:
Highlight green the cells in Column D where the month is due (i.e the month is now).
Highlight orange the cells that are one month passed the due month.
Highlight red the cells that are two or more months passed the due month.
I'm using Excel 2007.
View 4 Replies
View Related
Apr 16, 2013
I select the date from drop down calendar in excel and linked with one cell. when i use the date in vlookup formula it does not work due to linked cell date format.
View 14 Replies
View Related
Oct 5, 2011
Excel 2007 Textbox changes LinkedCell Cell format to Text. If I do a VLOOKUP on that cell it fails and I have to "Convert to number".
My application is to enter a ZIPCODE into ZIP textbox, then for CITY and STATE to autofill using VLOOKUP in both CITY and STATE cells.
View 5 Replies
View Related
Jul 11, 2012
I have a file which included monetary amounts in many currencies, which appear in Excel 2007 as:
232.44 EUR
103,796.10 CZK
18,071.08 PHP
I need to use the value and currency code, but unfortunately the currency code is part of the cell format (so I can't use, say =right(3) to grab it.
The cell format is set to: #,##0.00 "EUR" , with each cell set according to the currency within.
Of course I will be going back to the source to see what I can do to get something more useful directly, but is there any way I can grab the currency code so I can use it ?
View 1 Replies
View Related
Aug 27, 2012
I have phone number in phone format which looks like this: (123) 456-7890 which needs to be converted to: 1234567890.
I tried but unable to do so.
View 3 Replies
View Related
Sep 24, 2012
I'm attempting something that I feel should be relatively easy using the conditional formatting icon sets (3 arrows coloured)
I have values in columns A and B. I simply want to compare the value in column B against that in A, and format column B accordingly
B > A (green arrow)
B = A (amber arrow)
B < A (red arrow)
The icon set rules only allow for > or >= conditions, and I can't get the desired results using the rules.
A
B
B (with conditional formatting)
1
10
20
Green arrow (increase)
2
20
20
Amber arrow (no change)
3
15
5
Red arrow (decrease)
4
Excel 2007.
View 5 Replies
View Related
Dec 24, 2012
I have a question about conversion of a text format into date format.
2 computers, the first windows vista, the second Windows 8, both Excel 2007.
The purpose is to calculate the difference between 2 dates with hour:minutes:seconds, like for example:
18/12/2012 19:20:00 and 18/12/2012 19:23:03.
So in this example the result should be 00:03:03.
Both dates are formatted with 'personalized' : dd/mm/yyyy hh/mm.
In the first computer everything works like it should, but in the second it is apparently impossible to transform the first of those date h:m:s which is originally in a text format into a date format. I tried all the methods which i found to transform a text date format into a date , like multiplication with 1, Datevalue and others, but nothing seems to work, the result is always "#Value".
View 4 Replies
View Related
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Jan 20, 2014
The cell content is to be 0-7 characters in length.
Alpha characters only, i.e., no numeric.
First character must be uppercase.
Remaining characters may be lowercase or blank.
Is that possible to do in MS Excel 2007?
View 10 Replies
View Related
Jun 22, 2014
I have a SS of a WW1 casualty list and one of the columns is Dates of Birth but the data has been entered in three different formats eg 21/2/1898 or 21.2.1898 or 21 Feb 1898. I have tried to Format Cells and change the date format to the slash but after highlighting a number of fields and right clicking they will not re format. Though i use Excel quite a bit i am a general user and dont understand it in depth.
article using =DATEVALUE(
am using Office 2007.
View 4 Replies
View Related
Jul 14, 2013
I have some data coming in from another source system which has the date format as "DD-MM-YYYY" but while pasting it to Excel (2007) sheet some date fields has just DD-MM-YY format which disrupts my macro. I did changing the language settings to "English(UK)" ,which i wanted, and changed the same in Excel options as well. But unfortunately it doesn't work.
View 3 Replies
View Related
Sep 28, 2011
I am having trouble getting Excel 2007 on my work computer to save as .xlsx by default.
I have opened the Office Button > Excel Options > Save > Save files in this format and selected "Excel Workbook (*.xlsx)," and if I save as before closing Excel then it works perfect and saves the file as .xlsx. However if I close Excel, re-open it later and save a new file the default "Save as type:" is "Excel 97-2003 Workbook (*.xls)" and if I open the save options again the "Save files in this format" option is reverted back to "Excel 97-2003 Workbook (*.xls)."
I have finally overcome the [Compatibility Mode] issue by saving a file named "Book.xltx" (not "Book1.xltx") in the two default locations "C:Program FilesMicrosoft OfficeOffice12XLSTART" and "D:Documents and SettingsusernameApplication DataMicrosoftExcelXLSTART" (we use the D: drive at work for personal files). I thought this would solve the save as issue but it hasn't. I have also changed the "Save files in this format" before saving the .xltx files in the locations to apply the settings to those specific files but that hasn't worked.
It is on my work computer so I am limited in what settings I can change because they have them pretty well locked down.
View 7 Replies
View Related
Nov 16, 2012
I am using Excel 2007
I am trying to conditionally format rows based on the first cell in each row. I had this working in a previous worksheet and have gone through several examples based on answers in other threads but do not for the life of me know what I am doing wrong. I am using the conditional formating rules on the ribbon menu.
I have a range A3-W100 pre-formatted with generic data and formulae. Column A has no data. I want the text to change color for that row if the cell in column A is populated. The background and text are set to black to appear unpopulated.
When an item number is entered in column A3, the text color in row 3 changes to white. I can get this to work on one row but if I extend it through the range, all rows change. I want them only to change if the respective A cell is populated.
I am using
Formula is =A3>""
Format is Yellow,
Applies to =$A$3:$V$100
Stop if True is unchecked
All I can get is column B to change color.
View 6 Replies
View Related
