I am using excel 2007. My workbook contains a tab with several buttons with hyperlinks to corresponding other tabs in the workbook. The hyperlink works fine when the tabs are visible, but do not work when I hide the tabs.
Is there a way use hyperlinks on tabs that are hidden?
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
Im Having trouble with my Visual basic code in Excel 2007.
I'm using the code to hide two rows which works fine, however my code to hide the check box (second line of code)
I have just started using Excel 2007 after many years with 2003 and I must say that the new one is totally amazing except for one thing and Im sure there is an easy answer to this although the HELP was NO HELP
One the sheet I am working on I hide the sheet tabs through 2003 and now I see there is no options to unhide them. How do I do this.
I am using MS Excel 2007.
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I've just started using Excel 2007, and despite manually activating the add-ins I use, the add-ins tab is not showing on the toolbar. Also, I can't find the format tab either.
View 6 Replies View RelatedI want to put a hyperlink into an existing spreadsheet (which already has some hyperlinks in) but for some reason that option is now greyed out on my tool bar.
View 3 Replies View RelatedI am having difficulty writing code to insert a hyperlink from a command button on a userform.
I have set up a worksheet to be a data base for a lot of new files which are being created on a daily basis. The userform when activated asks the user to input certain information about the new file being stored in the data base (ie file name, date created, relevant project, description, who created it, etc). I have put a command button on the userform which I would like to activate the "Insert Hyperlink" menu so the user can then navigate to the location of the file being stored and have that hyperlink stored in a cell against the file when the "Submit" button is clicked on the userform.
I have read almost every thread on inserting hyperlinks with vba but none seem related to my needs. Using Windows 7 and Excel 2007
with the following: The VBA macro I am using, is derived from the excellent "Table of Contents" macro written by Erik Van Geit, a few years ago.
I have a workbook (in Excel 2007, Windows XP) with an Index sheet and 200 other sheets (called ScreenShot1 to ScreenShot200). Each of these 200 sheets has had an image pasted in the top left corner.
At present, using the macro below, a hyperlink is placed in cell A1 on each of these 200 sheets (it's behind the image) that links to cell M1 on the Index sheet. What I would like this macro to do is make each image the hyperlink back to cell M1 on the Index sheet. Please note that the images are not named.
VBA code below,
Sub create_TOC()
Dim i As Integer
Dim msg As String
Dim fc_order As Range
Dim sht As Object
'**** EDIT the following lines ****
Const TOC = "Table of Contents"
Const Index = "Index"
Const CellLink = "A1"
'**** END EDIT ****
[Code]....
I have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedExcel 07
I inserted a hyperlink into a cell that goes to a web page. It works when the sheet is NOT protected, as soon as I protect the sheet it stops working. How do can I lock the workbook and that cell so nobody can change it but the hyperlink still work?
What I'm tying to achive is to compare data on two worksheets called "Old" and "New" and to populate the difference on another worksheet called "Diff" see attached file where I have manually added the differences onto the "Diff" tab.
Is it possible via VBA or Vlookups to achive this
N.B. Excel version 2007
I am using Excel 2007. When I pulled up a workbook today with 3 sheets in it, all that comes up is the first sheet and the sheet tabs at the bottom of the screen are no longer there. I must have accidentlly pushed some button, but I can't get to the other sheets. I really need the information on the other sheets. How do I restore the view that shows the sheet numbers at the bottom?
View 2 Replies View RelatedI have a worksheet with several data validation dropdowns that each link to a series of hyperlinks. When you click the dropdown and select the hyperlink, it opens up that particular file. All of these work, except for one of the dropdowns. Even though I can see and select the names, the link is NOT activated.
Is there some obscure excel feature that I am not aware of that is preventing this one from working? Why would this be?
Excel 2007.
hi ive made macros on excell conecting my sheets so i dont need my tabs how can i hide them and then when i need them view them again.
View 9 Replies View RelatedHiding sheet tabs. can you hide tabs on excel?
View 4 Replies View RelatedIs there a way to hide a hyperlink in a cell that it blank, at the moment I have multiple cells like below that shows the hyperlinks
ResourceSummary!B12
ResourceSummary!B13
ResourceSummary!B14
I am using the following codes to hide the menu, formula bar and the headings. One more thing I need to do but do not know how - hiding the tabs at the bottom of the sheet. The idea is not to let users to right click and unhide other sheets.
'Hide main menu
Application.ExecuteExcel4Macro "SHOW.TOOLBAR(""Ribbon"",False)"
'Hide headings
ActiveWindow.DisplayHeadings = False
'Hide formula bar
Application.DisplayFormulaBar = False
Is it possible to set up a hyperlink for a cell, when clicking on it, hides/unhides certain rows below that cell. For example, having a full employee roster, each name having 15 rows underneath. By making the Name cell hyperlink, and by clicking on it, I would like to only hide every 4, 5, & 7th line underneath the hyperlinked name. A full list could have 150 employees on one sheet.
View 9 Replies View RelatedHave designed a spreadsheet in 2003 at work and got home to work on in it using my machine which has 2007 loaded.
Have hidden the sheet tabs on the 2003 sheet and can not find the option in 2007 to make them visible again.
I realise I can ctrl-pgup and pgdn but I got a fair bit of movement from sheet to sheet to do and that wont be practical.
I have a workbook that uses a index page that I created. It has lots of hyperlinks on it to route them to other sheets in the workbook. Each worksheet has a hyperlink to go back to the index page, and one to open an email. I have a user with 2010 now that is getting an error when clicking on the hyperlink. Error Message: "This Operation Has Been Canceled Due To Restrictions on the Computer. Contact Your Administrator."
View 3 Replies View RelatedI hope I can explain what I am trying to accomplish properly. Many years ago (5+), I had this exact workbook setup, but am having a lot of difficulty remembering VB & Excel and making this again from scratch.
I am looking to create an Excel Workbook. The workbook will contain numerous tabs, each tab will essentially be a template, and contain basic formulas.
On tab 1(Sheet1), I would like to have a listbox. The individual items in the listbox, should have the same name of, and be linked to all tabs in the workbook.
There will also be three buttons.
Button1 - Generates the names in the listbox based on existing tabs within the workbook
Button2 - Opens a new workbook, and copies over the selected tabs (AKA - creates a working copy of the workbook)
Button3 - Clears the selection and resets the listbox.
The number of tabs, and contents of tabs, within the workbook will be changing. So the listbox should know to look for all tabs, be it 5, or 50.
The end result would allow someone, who knows nothing of Excel, to open this workbook, as a read-only file. Generate a list of available tabs, select the tabs they need, generate a new workbook containing these tabs, that they can then edit to suit their needs.
In my line of work (and I am sure everyones) there is a huge problem with consistancy. This leads to a snowball effect of problems carrying over, and being copied from one project to the next. As I mentioned earler, I once already had this workbook setup, and it solved all our consistancy problems. I am hoping to do the same.
I am using the formula ABS(D6-G6) when these cells are empty I get a 0 result, how can I get rid of this?
Using 2003
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
I am using Excel 2010 and I am trying to hide the rows# 10 to 12 in Sheet6 and it is working perfect by clicking on radio button.
[Code].....
Now i also want to hide two more rows in Sheet7 by using below snipet but it doesn't work.
[Code] .....
I like the look of when only the used columns and rows are shown. I like to hide all unused columns and rows, and have the background and a minimalist spreadsheet.
HOWEVER, is it just me, or does Excel move a lot slower when thousands of rows and columns are hidden? Particularly, opening files seems to be slower. I'd love to delete them entirely from existence, so Excel only has a few rows and columns to work with, but that doesn't seem to be an option.
I am using MS Excel 2010.
What I want to Hide two worksheets and leave one worksheet open when I close out the file.
ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file
I am currently working on a workbook for work. It is a basic input output sheet. I have data from work that i copy and paste into sheet 1 and I have it arranged into sheet 2.
I am using windows 7 with Excel 2010, though needs to be compatible with 2007 using XP.
What I am trying to implement. I would have a drop down box in cell AD-4 with the current list
Select
Week 1
Week 2
Week 3
Week 4
What I want to implement is a code that if I select "week 1" from drop down then it will hide the entire row if data in column B = week 2, week 3, week 4, week 6
also
If week 2 is selected then hide entire row if column b = week 3 , week 4, week 5
so basically hide the weeks that are after the current selected week.
In addition to this I would also like to hide the entire row, regardless of drop down selection if data from J, K and O all = 0 or (blank).
(the first row is the current Row labels, I have a lot of current hidden columns).
A
B
J
K
O
Supervisor Name
Agent Name
Needs Complete
Completed w/o Turn in
Needs Turn In
[Code] ........
Is there a way in Excel 2010 that the administrator of a excel document can not only hide some columns but lock the columns by some kind of password so it remains hidden? I know user can hide/unhide columns but can some columns be hiddens and locked with passwords?
Secondly can formulas like IF and vlookups statements be hidden and locked with some kind of password?
In maybe via VBA or by some other means, is this possible?
The end user should only be able to type and select certain cells only.
I have two worksheets (Sheet1 and Sheet2). Based on meeting a condition on Sheet1 AND Sheet2, I'd like to use macros to automatically hide rows on Sheet2.
Sheet1 sample:
Type
Selection
[Code]...
The conditions are: If on Sheet1, a Type has the Selection "Include", then any rows on Sheet2 which have that same Type are shown (ie. not hidden).
If on Sheet1, a Type has the Selection "Exclude",then any rows on Sheet2 which have that same Type are hidden.
So in the example tables above, if ONLY Type A = Include, then on Sheet2, the rows for Sample URL1 and Sample URL2 are shown, and the others are hidden.
Also in the example tables above, if Type A = Include AND Type B = Include (and all other Types are Exclude), then on Sheet2, the rows for Sample URL1, Sample URL2 AND Sample URL3 are shown, and the others are hidden.
I'm fine with the concept of If... And... on the same worksheet, it's trying to get it to look at two separate worksheets I'm struggling with!!