Excel 2007: Tabs Not Showing On Ribbin
Sep 8, 2009I've just started using Excel 2007, and despite manually activating the add-ins I use, the add-ins tab is not showing on the toolbar. Also, I can't find the format tab either.
View 6 Replies
ADVERTISEMENT
Excel 2007 :: Change Colour Of Tabs To Match Other Tabs In Workbook
Sep 22, 2012I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
Excel 2007 :: Comment Boxes Not Showing To Near The Related Cell?
Dec 9, 2012I have worksheet with 5000 rows data's including the comments in one coloumn.My problem is when I edit the comments,the comment box shows somewhere else is not showing to near the related cell.I am using excel 2007,its happen after the upgradation of 2003 to 2007.
View 2 Replies View RelatedExcel 2007 :: Custom Controls Not Showing In Add-ins Ribbon Tab And XML Error
Jul 18, 2013We are using Windows7 with Excel 2007. We have old code from excel 2003 and earlier that was adding a msoControlPopup with other sub-controls using the code below:
Code:
Set HelpMenu = CommandBars(1).FindControl(Id:=30010)
If HelpMenu Is Nothing Then
' Add the menu to the end
[Code].....
I tried going to Excel Options>Customize>Reset to reset any customizations to the quick access toolbar as this was recommended by something else I found online. This did not fix the problem.
I can find the control in the Immediate window but it just isn't showing in the add-ins tab. if I can find and repair that XML file perhaps?
Excel 2007 And Tabs
Jan 22, 2008I have just started using Excel 2007 after many years with 2003 and I must say that the new one is totally amazing except for one thing and Im sure there is an easy answer to this although the HELP was NO HELP
One the sheet I am working on I hide the sheet tabs through 2003 and now I see there is no options to unhide them. How do I do this.
Excel 2007 :: Hiding Tabs With Hyperlink?
May 17, 2010I am using excel 2007. My workbook contains a tab with several buttons with hyperlinks to corresponding other tabs in the workbook. The hyperlink works fine when the tabs are visible, but do not work when I hide the tabs.
Is there a way use hyperlinks on tabs that are hidden?
Excel 2007 :: Sorting Tabs In Alphabetical Order
Feb 7, 2011I have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedExcel 2007 :: Compare Data On Two Tabs And Populate Differences On New Tab?
Jan 24, 2014What I'm tying to achive is to compare data on two worksheets called "Old" and "New" and to populate the difference on another worksheet called "Diff" see attached file where I have manually added the differences onto the "Diff" tab.
Is it possible via VBA or Vlookups to achive this
N.B. Excel version 2007
Excel 2007 :: Sheet Tabs At The Bottom Of Screen No Longer There
Apr 26, 2012I am using Excel 2007. When I pulled up a workbook today with 3 sheets in it, all that comes up is the first sheet and the sheet tabs at the bottom of the screen are no longer there. I must have accidentlly pushed some button, but I can't get to the other sheets. I really need the information on the other sheets. How do I restore the view that shows the sheet numbers at the bottom?
View 2 Replies View RelatedWorksheet Tabs Not Showing
Aug 23, 2006I've received a workbook that contains maybe 60+ worksheets. To navigate the workbook, a person must use the hyperlinks on each sheet. However the worksheet tabs do not appear at the bottom of the sheet. I've checked Tools / Options / View / Sheet Tabs and the checkbox is checked. II've also tried unchecking and rechecking the box.) There are no custom views created.
View 2 Replies View RelatedEmailed Workbook Not Showing Worksheet Tabs
Jan 18, 2009I have an Excel 2007 workbook that's been used for 5 months or so now. Recently, people I email it to say they can only see one worksheet in the workbook when they open it, and are unable to switch to any other worksheets in the workbook (they can't even see the tabs). They are in the "normal" view, and I have no idea what else could be wrong. Did I mess something up with the protection? Any other ideas to check?
View 4 Replies View RelatedSheet Tabs In 2007
Oct 7, 2007Have designed a spreadsheet in 2003 at work and got home to work on in it using my machine which has 2007 loaded.
Have hidden the sheet tabs on the 2003 sheet and can not find the option in 2007 to make them visible again.
I realise I can ctrl-pgup and pgdn but I got a fair bit of movement from sheet to sheet to do and that wont be practical.
Listbox Linked To Workbook Tabs (2007)
Oct 17, 2008I hope I can explain what I am trying to accomplish properly. Many years ago (5+), I had this exact workbook setup, but am having a lot of difficulty remembering VB & Excel and making this again from scratch.
I am looking to create an Excel Workbook. The workbook will contain numerous tabs, each tab will essentially be a template, and contain basic formulas.
On tab 1(Sheet1), I would like to have a listbox. The individual items in the listbox, should have the same name of, and be linked to all tabs in the workbook.
There will also be three buttons.
Button1 - Generates the names in the listbox based on existing tabs within the workbook
Button2 - Opens a new workbook, and copies over the selected tabs (AKA - creates a working copy of the workbook)
Button3 - Clears the selection and resets the listbox.
The number of tabs, and contents of tabs, within the workbook will be changing. So the listbox should know to look for all tabs, be it 5, or 50.
The end result would allow someone, who knows nothing of Excel, to open this workbook, as a read-only file. Generate a list of available tabs, select the tabs they need, generate a new workbook containing these tabs, that they can then edit to suit their needs.
In my line of work (and I am sure everyones) there is a huge problem with consistancy. This leads to a snowball effect of problems carrying over, and being copied from one project to the next. As I mentioned earler, I once already had this workbook setup, and it solved all our consistancy problems. I am hoping to do the same.
Excel Cell Not Showing Full Data?
Apr 10, 2014In a particular CSV Excel file I want to populate "Description" column with a HTML template Code by merging 3 columns of HTML. The HTML has almost 20,000 characters. Now before merging and after merging when I copy paste the HTML in any cell it doesn't show all the code that I have copied. and when I merge all the 3 columns. a lot of HTML data seems to be missing. I think excel has some sort of limit and it is not allowing all these 20,000 characters merged and combined in 1 cell. I am stuck at this point and can't upload the CSV as the HTML is missing a lot of coding.
View 2 Replies View RelatedExcel 2010 :: Pivot Table Showing Zero Instead Of Value
Mar 8, 2014My problem is this: I use Excel 2010 and have Pivot Tables that are using a Data Connection which is being built (and rebuilt) with VBA. The Pivot Table field is calculating a field that contains an integer value. The Pivot Table field filter properly displays this value.
However, the Pivot Table itself calculated Sum field only displays 0 (aka zero). Other fields that are exactly the same as this one are displaying properly.
My data connection is built as follows:
Code:
ThisWorkbook.Connections.Add "ChartQuery", "", "OLEDB;Persist Security Info=0;DSN=Excel Files;
DBQ=" & wbFullName & _ ";DefaultDir=" & wbPath & ";DriverId=1046;MaxBufferSize=1024;PageTimeout=5;
BackgroundQuery:=False", sSQL, 2
(And yes, my sSQL is sound, there are no typos, no special character issues)
The filter in the Pivot Table shows my value (for example, 14) however it always only displays a zero
My Pivot Table is formatting the field (like the others just like it) as a Number, two decimals
My Pivot Table data source is ChartQuery
The worksheet this is pulling from is also set to use Number format for the entire column, but changing that doesn't make any difference even on the other fields that are working.
Part Of Excel Formula Showing In Cell
Apr 30, 2014I was given this Formula to use in a cell to calculate the total hours from 2 different cells, from inputting date and time from and to dates..as an example from 4/1/14 0:00 thru 4/1/14 12:00.....The problem I am encountering is that when the spreadsheet is 1st opened "+1" is visible in the cell where this formula is. I am asking how the formula can be altered to have the "+1" not visible in the cell before any date and time is entered.
= INT(F13-D13)*24+(((F13-D13)-INT(F13-D13))/0.04166666)+1
Excel 2010 :: Showing Multiple Values Per Cell?
Jul 31, 2014When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.
If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.
Excel Not Showing 0 Amounts As Data Label In Charts
Feb 17, 2009I am building automated solutions where graphs source data is based on outcome of formulas. In case of line graphs I use #N/A as result if no data is available or formula results into an error - this way the data point and data label will not be shown in the graph.
However this does not work for bar graphs - with #N/A, #DIV/0, 0 or "" the bar itself is not shown but the data label is shown (as #N/A or 0). How can I set-up my formulas so that if result is 0 or formula is in error that the graph does not display the data label.
Attached excel file shows same data in 2 charts - 1 line chart (=OK) and 1 bar chart (=not ok). The data for chart is pulled from 2 other tabs (week&month) and merged into 1 data source for graphs.
Excel 2010 :: Group + / - Button Not Showing In Header?
Feb 26, 2014I'm using 2010. When I highlight rows or columns and select Group, the show (+) / hide (-) buttons would appear in the next to or above the header rows/columns.
The file I am working on is not showing these buttons. If I go to the Data tab & click "hide detail" or "show detail", it will hide my grouping if I'm in one of the cells of the grouping.
I can easily hide/unhide, but would rather group & click rather than highlight rows/columns.
Conditional Formatting In Excel For Each Row Showing Max / Highlighting It And Ignoring Zero
Jun 1, 2014I have a data with say around 500 rows and want to determine MAX for each row and HIGHLIGHT them, also if data in all cells is zero then it should ignore and highlight none.
I have tried this formula
=B2=(MIN(IF($B2:$E2>0,$B2:$E2))).
But this highlights all the zeroes, you can refer attachment for sample..
Excel 2010 :: Values (from VLookup) Not Showing Up In Chart
Oct 22, 2012I have excel 2010....
I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem
2010/Jul
2010/Aug
2010/Sep
[Code].....
Some Excel Fields Not Showing Up In Pivot Table Pull Downs
Aug 16, 2012I have been having issues with some excel fields not showing up in my pivot table pull downs.
For example I entered the date 6/8/97 into a field in my database and after I hit refresh on my pivot table that specific date doesn't show up in the Date field list pull down. It is like the pivot table doesn't even see that date and/or it is recognizing it as another date. I have this same issue w/ other field lists (eg. last names).
Link Excel To Another Program - Only Showing Data / Information When Needed
Jul 3, 2014However, I have got an Excel file which contains a lot of information. There are four sheets with large Pivot Tables.
But the thing is, the plan is to do the tables much larger, create tables which more specifically shows information. When doing so, the tables will show much more information, and therefore be much larger. It will be difficult to read and understand the tables because of the large amount of information.
What I want is to store information in, for example, another program such as Microsoft Access. There, I can put a huge amount of information and then link it to Excel, so that in Excel I only see the Access stored information when I "search" for it with y created slicers. Like, when I use my slicers and click on one category it sort out and shows me the information i want, even though it's stored in Access. It only shows it in Excel when I "ask" for it. This is what I have thought.
Excel 2010 :: Paste Options No Longer Showing Up When Clicking CTRL
Jul 30, 2014I'm currently using Excel 2010. Before, when ctrl+v'ing a cell that wasn't a number (but was, for example, a function), I could immediately after press ctrl, bring up a paste menu, and press v to paste as a value.
So before, if I had a range of cells that were functions (say something simple like "=D3/E3" on F3 and dragged down), I could do the following to paste the range into another worksheet:
1. Ctrl+shift+down to select the entire range
2. Ctrl+C
3. Ctrl+V into a different worksheet (at which point everything shows up as either "#DIV/0!" or as the wrong number, depending on cells to the left)
4. Ctrl (brings up the paste menu)
5. V (selects "values")
6. The entire range is now pasted as values, and not as functions
Recently, however, clicking on "ctrl" after pasting brings up no paste menu. I haven't changed any settings. I will lovingly serenade the first (and second, and third) man (or woman) that figure out what settings I must change or what I must do differently.
Excel Sheet Tabs On The Top Row
Sep 25, 2008is there a way by which i can have Excel sheet tabs on the top rather than currently at below.
View 9 Replies View RelatedHow To Hide Available Tabs In Excel Worksheet
Jul 16, 2014knew if there was a way to hide the available tabs in an excel worksheet.
I know you may be thinking just right click and hide, however what I am looking for is a little different.
Basically I have a Macro Enabled work sheet which works on a "one click" system. The work sheet is full of buttons with assigned macros and data validation drop down boxes which link to many different tabs. The entire sheet is for information only so I will be locking the sheets to avoid data manipulation. The problem with right clicking and hiding the tabs is that it interfears with the macros.
All I really want to do is make these tabs not visible. I have set the sheet to open in full screen mode and they obviously are still there, but this is basically what I am looking to do. Not so much hide them in terms of sending them into the background, more so make them "drop off" the bottom of the screen to they are still active but not visible.
Excel - Export Tabs To PDF Format
May 9, 2012I'm trying to export a couple of tabs in excel to PDF format. The code below works perfectly for a single tab, but I'd like to export two tabs into a single PDF document. How to tweak the code to allow a second tab to be exported at the same time? In both cases, I'd like to export the print area of the tab.
Code:
zPath = ThisWorkbook.Path
zFile = Range("R8").Value
Sheets("Balance Sheet").ExportAsFixedFormat Type:=xlTypePDF,
Filename:=zPath & "" & zFile & ".pdf",
Quality:=xlQualityStandard,
IncludeDocProperties:=True,
ignorePrintAreas:=False,
OpenAfterPublish:=False
Formula That Will Allow To VLookup Different Tabs In Excel
Jun 26, 2012I need a formula that will allow me to look up data on different worksheets. I have 5 worksheets (1 summary, and 4 with raw data). The raw data tabs all have the exact same number of rows and columns but the data is from a different region. I want the user to be able to select from a drop-down menu which region they want summary data tab to pull from using a vlookup formula.
For example, I have five tabs in my workbook: Tab1) Summary Tab which needs to pull the data from the other four tabs, Tab2) named "West", Tab3) named "East", Tab4) named "South", Tab5) named "North". Using a drop-down list, I want to be able to select either West, East, South or North and have the vlookup formulas look at the corresponding tab for the data. So, in my example, if I select "North" from the drop-down menu, I want the vlookups to pull data from the "North" tab etc. I do not want to use PIVOT TABLES for this.
Excel - Can't See Worksheet Tabs On Screen Anymore
Oct 12, 2005Microsoft Excel is no longer displayed at the top of the screen, and I can't see my worksheet tabs at the bottom of the screen.
View 3 Replies View RelatedExcel Reference That Tabs Information Into Summary
Dec 6, 2011I have a worksheet that contains 26 tabs all of which have the same format but contain different data based on that pay period. i would like to create a summary tab which will allow me to enter the pay period at the top (1,2,3 ect) and have excel reference that tabs information into the summary. Is this possible?
View 6 Replies View Related