Is it possible to set up a hyperlink for a cell, when clicking on it, hides/unhides certain rows below that cell. For example, having a full employee roster, each name having 15 rows underneath. By making the Name cell hyperlink, and by clicking on it, I would like to only hide every 4, 5, & 7th line underneath the hyperlinked name. A full list could have 150 employees on one sheet.
I am using excel 2007. My workbook contains a tab with several buttons with hyperlinks to corresponding other tabs in the workbook. The hyperlink works fine when the tabs are visible, but do not work when I hide the tabs.
Is there a way use hyperlinks on tabs that are hidden?
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but itís not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit Const Startingrow = 11 'Data starts on row ## Const AlarmDelay = 183 'send warning Sub CheckTimeLeftFac() 'References needed : 'Microsoft Outlook Object Library
Dim i As Long Dim j As Long Dim msg As Long Dim Lastrow As Long Dim WhoTo As String Dim SubjectLine As String Dim MessageBody As String Dim olMail As Outlook.MailItem Dim olApp As Outlook.Application Dim strLink As String
- each cell in the 3rd column has an equation in it as such: =h4+f5-g5 which means that the current cell in column 3 is adding the value of the cell just above it + and - the values of the cells on the left to it. This works fine, the only problem is that even though nothing is entered in row 40 for example, there still is a value based on the last calculation in row 5 for example - this value shows all the way down to row 100. Anyways,
How can I hide those values in column 3 all the way down to row 100 if nothing is entered in the other 2 rows?
I want to be able to hide a selection of cells, including the border formatting, when another cell has a particular value (in this case I want the cells visible only if the value in the cell is above 0). I've looked around and can't seem to find anything relevant.
I am trying to hide columns where the Value in the cells on row 9 is "", that cell being populated with a formula where the result is "". However I am getting the Compile Error Message 'Next without For'. Any clues?
I have numerous tabs in this file, but all of the tabs all summarize to the first tab called "Annual Record".
So after "Annual Record", tabs follow as "WO1", "WO2", etc...
On the tab called "WO1", I have cell AJ5, which can have 3 status selected (Data Validation List), which is either Inactive, Open, or Completed. If cell AJ5 on "WO1" says "Inactive", then I want a named range on "Annual Record" to be hidden. Right now I have the range named "WorkOrder1". This named range is essentially rows 4-7. So if it's easier to hide rows vs. a named range, then so be it. I also would like it to happen automatically (perhaps what you would refer to as a change event). When cell AJ5 is change to either "Open" or "Completed", then the rows would unhide. I'm thinking that this would be repeated for tab "WO2". If cell AJ5 says "Inactive", then rows 8-11 on the tab "Annual Record" or the named range "WorkOrder2" would be hidden. And again, if the cell AJ5 is change to anything other than "Inactive", then the rows or range would unhide.
I am making a accounts spreadsheet for an association. The account has an income and outcome column - and there is a balance column to calculate the overall funds. My problem is when I type the formula for working out the balance - the formula is fine, its what happens after I drag the formula down the page
The code works fine and it displays the overall balance - but when I drag this formula down th page it displays the same balance for as far as I drag the formula down. I wish to only display the balance up until the last entry e.g...........................
I have a sheet that pulls data from an external source. I want it so that when a person clicks on a cell or a range of cells, it automatically locks and hides the formula. I don't want to lock it by using the conventional method because protecting it will cause the external data not to be able to populate the cells. So my thinking is that when the data is imported, and the user clicks on a cell, it will automatically lock and hide.
I need columns
A C E:BB to be locked and hidden as soon as someone clicks it. Is this possible?
I read somewhere that I may be able to do some type of "Private Sub Workbook_SheetSelectionChange" to achieve this.
I have a workbook that has about 30 different sheets with names titled "Joe", "Jane", "Paul", etc.
I have a Cell (B12) that has been formatted as a dropdown menu with about a dozen different options such as "Audit A" , "Audit B" or "Other" etc. What i'd like to do is hide or display certain sheets based on what the value is in cell B12.
if cell B12 says any of the following "Audit A" or "Audit B" then it would hide certain sheets. If the value in B12 says "Other" or something other than "Audit A" or "Audit B" then it wouldn't hide anything at all. I tried searching and couldn't find anything like this although it may have been answered before.
Is there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if thatís what is in the other cells.
the support this board has given me as I learn VBA. I have three columns - Q, R, and S. I only need to see columns R and S if the cell values don't equal those in column Q or each other. So if I have cell values like the ones listed in the example below, then I don't need to see columns R and S.
I have a macro that I am trying to add a feature to at the end of the code that hides blank rows. I have tried numerous methods based upon other forums, but my code does not seem to work and does not hide blank rows. In red is the section of code that I am having trouble with.
Dim c As Object Dim rngA As Range Dim cc As Object Dim AA As Range
'Check every cell in the range for matching criteria.
I have an elaborate spreadsheet that I have made for my company. I will give a little background how I have it set up: E6 contains a drop down menu of all products that we sell, and line items are populated based on the selection here. In columns N and O, I have a "Business Partner Costs" table that calculates a specific discount % based on the business partner.
Some of our products are sold to BPs with no discount. For these specific products, I am trying to get the BP Costs table to disappear, or hide.
Basically, I want something like: "=if(or(e6=ae2,e6=ae7,e6=ae12,e6=ae13,etc),hide columns N&O,show columns N&O)" in macro format.
I feel a bit silly asking this in the presence of so many obvious excel gurus: but here it goes. I've created some user forms, activex controls, etc. that do a series of complex calculations, supported by VBA and it's at the point where I want to roll it out. How do I hide / get rid of the active cell marker on the sheets? I've looked in the "options - view" section and have lucked out.
I have a worksheet that has >10 rows of data and over 150 columns. The values in the cells for individual row include NA, NE, D, A and S. Each row will have one or all of these values in one of the cells. Here is the question:
How do I hide columns containing 'NA' in the cell for a particular row, when only that row is selected by clicking on any cell in row 'A'? For example: If my row 3 cell values for column A, J, R, and X are 'NA' I want to hide the column containing 'NA' only and display everything else? And only when I click on row 3 column 'A'
I am trying to work out a macro to hide and unhide rows in worksheet 6 based on a cell input (cell I6) in worksheet 1 based on the following:
>> If I6 in Worksheet 1 = 1 or 5 or 6 then Hide Rows 19 to 24 in Worksheet 6 >> If I6 in Worksheet 1 = 2 then Hide Rows 21 to 24 in Worksheet 6 >> If I6 in Worksheet 1 = 3 or 4 or 7 then Hide Rows 17 to 20 in Worksheet 6 >> If I6 in Worksheet 1 = 8 or 9 then Hide Rows 17 to 20 and Rows 23 to 24 in Worksheet 6
I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
I am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.