Excel 2007 :: Copying Formulated Rows From One Sheet To Another
Dec 18, 2013
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies
ADVERTISEMENT
May 22, 2012
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
View 1 Replies
View Related
Sep 23, 2013
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
View 2 Replies
View Related
Jan 11, 2012
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
View 5 Replies
View Related
Mar 1, 2012
(Excel 2007). I have a report that I download which looks like this: The actual report has about 10000+ lines
I don't really want a macro for it but a formula that would copy the name in column A down in Column C but only to the point where the next name starts. So for example James Brown would be copied down in Column C till it reach Account Number 81914 and so on?
A B C
NameAccountJames Brown16836546259386014759716624957862380714557311623681914Steve Smith825168050422745213781459686708210378813700484308138459Holly Wood152663787051472924045442366165332455059500133525111211
View 5 Replies
View Related
Mar 24, 2012
I am running Excel 2007.
I have set up a table and for ease of explanantion Column C has a formulas in it to add together the values found in Column A and B.
EG C3 foumula = "=sum(A3+B3)"
Now in cols d & e I have manually entered figures and in colum F I want to add up those figures so F3 should read "=sum(D3+E3)"
In the past I have always been able to just copy the cell C3 and paste it into F3 and the formula would automatically copy and offset the various cells to the correct cells for the new posiitoning.
However, for some reason when I copy the cell, it now pastes the value only into the pasted cell and does not copy the formula, if I click on paste special to try to just copy the formula I now get a pop up asking me if I want to paste as Unicode Text or Text.
I have no recollection of changing any settings.
View 3 Replies
View Related
Jan 8, 2013
I am creating many tables in excel using a macro, and I want to copy them into a word document for later use. All the tables come from a long list, so for simplicity, they all get created on the same range starting at F1. Before deleting the existing table and adding the new one, I'm trying to copy/cut the table and paste it into a word document.
In case it makes a difference, I have office 2007
VB:
Sub ExcelToWord(LastRow)
Dim objWord As Word.Application
Range("F1:F" & LastRow).Copy
With objWord
.Documents.Add
.Selection.Paste
.Visible = True
End With
End Sub
View 6 Replies
View Related
Jan 7, 2012
I am using Excel 2007, here's my question:
I just wrote two macros that each produce separate text files (call them 'A' and 'B'). I want to open 'B' with Excel VBA, copy all of its contents, and paste that content into 'A' right after a specific location in 'A' (where I have 10 consecutive asterisks, i.e., **********).
Most topics relating to Excel VBA and .txt files have to do with either importing / exporting into Excel (not what I want), or with associating .txt files to Excel (also not what I want).
View 7 Replies
View Related
Jul 14, 2013
I have some data coming in from another source system which has the date format as "DD-MM-YYYY" but while pasting it to Excel (2007) sheet some date fields has just DD-MM-YY format which disrupts my macro. I did changing the language settings to "English(UK)" ,which i wanted, and changed the same in Excel options as well. But unfortunately it doesn't work.
View 3 Replies
View Related
Nov 5, 2013
I'm a 2007 user. I am trying to conditional format a range of F1:J10, where F1 will be conditionally formatted relationally to A1. G1 is relational to B1. H2 relational to C2, etc., all the way down to J10 relational to E10. My conditional format formula in cell F1 is >A1*2 (will format F1 as orange). I want to be able to copy the conditional formatting over so the formula in J10 for example would be: >E10*2 (will format it orange).
I omit the "$" in the conditional format formula in an attempt to prevent it from being absolute. But every time I copy the conditional formatting over to the other cells, the formula within those cells remains identical to the formula in the original cell.
View 6 Replies
View Related
May 7, 2012
I am trying to develop a code which extracts the data from text files inside a folder (Folder test in my desktop) into one sheet. The Macro is in the workbook “Text Extract” which is an excel 2007 file. The data of each text should be copied to Sheet1 of this workbook one below the other. For testing purpose I have kept only one text file in the folder and was trying to copy the data from the text data extracted sheet to Cell A1 of Sheet1 of workbook “Text Extract”. The code works fine till copying the data, but shows below error in the line “Selection.Paste”:
Run time error 438: Object doesn’t support this property or method.
Below is the code:
Sub LoopThroughFiles()
Dim strFile As String
Dim strPath As String
[Code]....
View 6 Replies
View Related
Jun 6, 2012
Excel 2007.
I have conditional formatting set up so that the cell becomes highlighted if it contains a specific text.
Example of wanted conditional formatting:
Conditional formatting rules manager
Rule
Format
Applies to
Stop if true
[Code] ......
For some reason this formatting is inherited by another adjacent cell as we continue to input information.
For example:
Column M is formatted so if 'AP' is placed in any cell in that column the cell fills pink. As more information is inputted into the sheet, the conditional formatting copies to Column N. It does not happen with every entry and I have not been able to isolate the specific steps to recreate the copying. Multiple people use the same sheet and fill it out and needed.
After working with the sheet changes are made to the "applies to" column without people meaning to.
For example:
Conditional formatting rules manager
Rule
Format
Applies to
[Code] .......
I would like to make this formatting so that is only applies to the Column M and not "travel" to other cells of the sheet.
View 2 Replies
View Related
Sep 17, 2012
I have 2 excel files, let's call them 1.xlsx and 2.xlsx (excel 2007)
File 1 is the file where I want data copied into and file 2 is the file I want to copy data from.
File 1 has certain text strings in every say 5th column in always row 2. I want to find those strings in file 2 and if the string is found, go 6 rows down, copy the cell, and paste it into file 1, 8 rows down the text string. this is the code I came up with, but it doesn't work
Code:
Option Explicit
Sub get_data_from_2()
Dim i As Long
Dim j As Long
Dim FinalColumn As Long
Dim RngFrom As Range
[Code] .......
the bolded part gives me an error.
View 3 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Apr 10, 2013
I am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.
View 5 Replies
View Related
Jul 30, 2013
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
View 3 Replies
View Related
Aug 2, 2007
what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?
I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.
View 9 Replies
View Related
Feb 23, 2007
i am trying to copy rows from several worksheets into one master worksheet. if column F of any row has a value greater than zero then the rows should be copied to the master worksheet with all data.
View 5 Replies
View Related
Sep 1, 2009
I have one excel 2007 workbook with three sheets in it.
Sheet 1 is a master sheet with 1858 rows and 45 columns of data.
Sheet 2 has the qualifier data, that is, one column with 255 unique 6-digit integers each in its own cell.
Sheet 3 is a result or output sheet that is currently empty.
Here is what needs to be done.
Compare all of the 255 unique 6-digit integers from Sheet 2 with the integers in column number 15 (or Column O) of Sheet 1.
If there is a match then copy that entire row from Sheet 1 into Sheet 3.
View 9 Replies
View Related
Oct 20, 2009
I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
View 9 Replies
View Related
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Feb 27, 2014
I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.
[Code].....
View 14 Replies
View Related
Feb 9, 2012
I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
View 1 Replies
View Related
May 1, 2013
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
View 1 Replies
View Related
May 21, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 9 Replies
View Related
Jun 2, 2009
i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...
View 9 Replies
View Related
Mar 19, 2014
MS Office Professional Plus 2010
Excel 2010, 32bit
When making a copy of a sheet within the same workbook, I receive several messages "A formula or sheet you want to move or copy contains the name . . ."
How do I identify and remove these names?
How do I prevent new ones from being generated in the future?
View 4 Replies
View Related
Jun 16, 2014
Scenario is - n number of files are kept at a location say D:excelfiles
Each excel file contains, say, 10 sheets among them one sheet is called "custom".
Example -
file 1 - sheet1, sheet2, sheet3, custom, sheet5, sheet6
file 2 - sheet7, sheetB, custom, sheet9, sheet10, sheet11, sheet12
file 3 - sheet13, sheet14, sheet15, sheet16, custom, sheet17, sheet18, sheet19
and so on.
Requirement - all cell values of each "custom" sheet should get copied into a master excel sheet in file "import-sheets.xlsm".
To achieve this I started with copying each custom sheet from all excel files to the "import-sheets.xlsm" but I'm getting error.
Any way to directly copy paste the cell values of each "custom" sheet into a single master sheet of excel file "import-sheets.xlsm".
Attachment - dummy files to test macro. Macro name is copypaste.
View 14 Replies
View Related
Jul 23, 2008
I Have a macro which combines five excel sheets from five workbook into single worbook with five tabs containing five excel sheets.Everything is fine except that color of all five excel sheets is totally changed in the combined excel workbook.I tried this manually i.e copying excel sheet from each workbook and pasting the same in the new work book.
Here also color comes correct in only one excel sheet and rest all sheets color is lost.Please any one knowing solution to this problem explain. macro is used is shown below
Sub CopySheets()
Dim fileFolder As String
Dim fso, fsoFiles, f1
Dim w1 As Workbook
Dim w2 As Workbook
Dim ws As Worksheet
Dim i As Integer
Dim flag As Integer
Set w1 = Application.Workbooks.Add
Application.DisplayAlerts = False
Application.ScreenUpdating = False
fileFolder = "D:documents est est" '
View 9 Replies
View Related
Dec 27, 2012
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
Excel 2007 / Windows 7.
View 3 Replies
View Related
