Excel 2007 :: Userforms - Input Cell Value (via Text Box) And Output Corresponding Values From Resulting Row

Jun 24, 2013

I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).

I attached an image diagram that may better represent what I am trying to do.

View 9 Replies


Excel 2010 :: If Statement With Text As Range Of Values And Numbers Needed As Output?

Apr 23, 2013

Excel 2010, I have the following list (showing part of it):

T-Shirt Sizes


The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.

Thus, I've been trying to use the IF statement with the following logic but to as no avail

IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell

and so on for the other sizes...kind of like a counter for a for-do-loop.

View 2 Replies View Related

Transferring Of Input From Input Cell To Output Cells?

Jun 8, 2014

I would like to know if it is possible to transfer values of cells this way?

I've attached the excel file for easier reference.

View 3 Replies View Related

Formula To Compare 2 Columns And Manipulate The Resulting Data And Output

Mar 31, 2007

I have column A and column B:

I will be inputting data into column B.

I need excel to check to see if the data I input into column B is an exact match to the data in column A.

If it is an exact match, then column B will remain blank.

If the data in column B is different, I need column B to show the following:

No match: <data>

Example I input in column B the following:

Column A Column B
1. Car Car
2. 4357 9999
3. fsd34d 4erd
4. 98dkf 98dkf

Spreadsheet should show:
Column A Column B
1. Car
2. 4357 No match: 9999
3. fsd34d No match: 4erd
4. 98dkf

(Cell 1 and 4 in column B are empty because they are exact matches to Column A cell 1 and 4)

My questions:
1) How does the excel formula need to be written for this to work?

2) Is there a way to set it so that when I do a mass copy to data into column B that the formula will not be overwritten and it will still check to see if the data I copy and pasted into that column matches the data next to it in column A?

View 14 Replies View Related

Comparing Input Value From Set Of Values 1 And Output Data From Set Of Values 2

Sep 28, 2012

Got a road block on one of the trackers which I am trying to create which compares some of our agreements. Basically we need to compare current production with our contracts and then bring the tier level they are at in order to then calculate how much in overrides we receive. Belwo is an example:

Input Value = 140000
Out Should be = 1.5%

Set of Values 1


In a nut shell it will look for 14000 in set of values 1 and pick T3 to then go in set of values 2 and display corresponding T3 which will be 1.5% in above example as output.

View 2 Replies View Related

Input/output Values Into/from An Array

Nov 6, 2009

I have a long list of values, a few thousand lines, that I need to input into an array so I can run a formula on the values in the array and then take those results and put them into another array which I can then call to output down a different column. Is there a faster way to accomplish this than the typical For Loop with the activecell.value and activecell.offset commands, that just takes forever.

View 15 Replies View Related

Excel 2007 :: How To Count Same Input On A Cell

Jul 7, 2014

I need to count how many times an input in given on a same cell, and doing so on the hole column. Like when I enter "x" on cell A1 and it adds 1 on B1. If the input on A1 changes then comes back to "x" it adds once again 1 to B1.

For one Row I'm using this code but I really can't reproduce it on the others.

[Code] .....

I'm using Office 2007.

View 3 Replies View Related

Text Output Based On Combination Of Cell Values?

Mar 9, 2014

I'm tying myself in knots when trying to combine logical formulas to return a text value based on multiple cell values.

Cell A1 can equal 1-10, and cell B1 can also contain the values 1-10.

I want C1 to display the text "YC" if B1 value is equal to 9 or 10. I want C1 to display the text "SC" if B1 value is 5-8, and A1 value is 4-10. Any other combination of values should return a blank cell.

I tried splitting this into two components before trying to make it fit into a single equation, and i can achieve the first condition of display "YC" =IF(AND(A1>=9,A1

View 3 Replies View Related

Excel 2010 :: Multiply Text String By Number Resulting In List?

Feb 6, 2013

Using Excel 2010...

I have a list of names (text string) in a column (A) that have associated whole numbers in another column (B). What I would like to do is create a formula that multiplies the text string in cell A2 (for ex.) by the whole number in B2 and return a "list" of the text string in A2 equal to the whole number by which it is multiplied.

Here's a visual example of the results I want to achieve:

Using the above example, I would like to end up with a list in column D with 159 total rows with the text contents corresponding to the whole number in column B.

View 6 Replies View Related

Logical Formula With Output Based On The Text Input

Dec 2, 2009

Sometime itís so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isnít . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then itís should equal to the value in the box C7. Here is the formula I wrote that doesnít work.

View 4 Replies View Related

Excel 2007 :: Input Mask To Format Cell Content

Jan 20, 2014

The cell content is to be 0-7 characters in length.

Alpha characters only, i.e., no numeric.

First character must be uppercase.

Remaining characters may be lowercase or blank.

Is that possible to do in MS Excel 2007?

View 10 Replies View Related

Excel 2007 :: Restrict Cell Input Based On Another Cell Value

Jan 22, 2013

I am working in both 2003 and 2007 Excel.

This is a simplified version of my worksheet:

I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".

Now using info found in an old post, I can achieve this with a combination of data validation and code:
=OR(A2="SYDN",A2="ADEL") for the validation and for the code:

[Code] ......

The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.

I have attempted to attach a sample worksheet : Xl0000003.xls‚Äé

View 4 Replies View Related

Multiple Output From Any Cell Input

Sep 18, 2006

Im working a spredsheet for my work, it is a database of qualifications for certain employees. There are about a hundred different qualifications and about 20 different employees. And some of the qualifications overlap. I would like to input a certain date in one of the cells, and have it copy into some of the other cells where the quals overlap. But i would like to input that date into any of the cells that overlap, not just one.

View 12 Replies View Related

Excel 2007 :: Extracting And Adding Values From Within Text Strings?

Jun 2, 2013

I am trying to extract values from a text string and add them up in Excel 2007. So far i have been successful in extracting the value out of the text string like this - =MID(I6,AD6,3) where AD6 holds the position number in the text string to start from. So it's working OK for one row but i need to do the same thing on multiple rows where the text string can be in different columns and I'd like it to automatically pick up the non-blank cell.

each row only has one column with text in it and the value i need to extract is always after "$". this is a working spreadsheet so the text string could move from column to column over time and I'd like my formula to be able to detect which column to read from. I then need to add up all the values from each row.

View 9 Replies View Related

Link Input To Auto Output In Next Cell

Apr 9, 2014

Is it possible to have a code of say numbers or letter assigned to an explanation of that said code which automatically appears in the next cell?

See attached spreadsheet : Auto fill next cell with predetermined answer from list.xls

View 2 Replies View Related

Excel 2007 :: Sum 2 Values In Same Cell

Nov 12, 2012

NUMBER41101928=152112029=263122130=374132231=485142332=596152433=6107162534=7118172635=81291827369Excel 2007

Sheet1HIJKLMN12Last Nights Fantasy 5 Numbers3411/11/12051922293256sum of 7digits/#5142589pattern21110101112Full PkgAll Possible Patterns of 13CombinationsSum Of Digits1415129,0241111116193,536211101736,288221001816,12831100191,728320002028841000Excel 2007

Need a formula in Cols J7:N7 to return the sum of the values input in J4:N4 as a single digit. The table in the first image shows what the results should be.

View 9 Replies View Related

Excel 2007 :: How To Input Number And Get Name

Dec 9, 2011

I am trying to auto fill one cell with one of several names using different values from another cell. Ex: when one of six numbers (100, 101, 102, 103, 104, 105) in input in A2, I want B2 to display a name (Joe, Tom, Steve, Fred, Tyler, Todd) that corresponds to that number. Cells in columns A and B will be formatted as text. Using Excel 2007.

View 9 Replies View Related

Excel 2007 :: Cell Text Sort

Nov 17, 2011

I am struggling with doing a sort, of a group of alpha characters within a cell (Excel 2007). My data was exported from Oracle 8 as a varchar2 and consists of letters.

Example of what I have

Example of what I want

All I could find were these complex looking solutions involving cursors, plsql, etc. I'm hoping there's a simple solution, maybe within Excel. I've tried different formatting, made sure no other characters were sharing the cells, and tried typing fresh data into a cell (instead of the exported data).

View 8 Replies View Related

Excel 2007 :: Textbox Changes Cell Format To Text

Oct 5, 2011

Excel 2007 Textbox changes LinkedCell Cell format to Text. If I do a VLOOKUP on that cell it fails and I have to "Convert to number".

My application is to enter a ZIPCODE into ZIP textbox, then for CITY and STATE to autofill using VLOOKUP in both CITY and STATE cells.

View 5 Replies View Related

Excel 2007 :: Saving Text In Given Cell To C Drive

Sep 13, 2012

My set up win xp pro office 2007. Object is to save the text from a given cell to drive C naming the file with the value in another cell. E.g.

Contents of cell ("AA5") is a string and the content of ("D5") is a number

I have tried altering the code posted which i found on the forum, it works fine for the purpose as it was indented e.g. save the workbook and in my case saves it as the value in cell D5.

I guess I need to use some form of object to pass to the save as method but my knowledge of this is somewhat limited in addition as the is a possibility of either the cell being empty and the file name existing on the C drive, I need to disable the windows warnings and just go ahead and save it over writing what is on the C drive is of no importance as it will be the same data anyway, I can wrap the save in a "if Len ( AA5)= 0" to stop it trying to save if the cell if empty it the save the text string i am having problems with:

Option Explicit
Sub SaveAsExample()
Dim FName As String
Dim FPath As String
FPath = "C:"
FName = Sheets("Sheet1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName
End Sub

View 8 Replies View Related

Excel 2007 :: Cutoff Text In Cell And Show Ellipsis?

Jul 5, 2013

I have an Excel 2007 spreadsheet with one text based column containing some large text data. I want to be able to have the text in this cell reduced to show certain fixed number of lines(maybe 2) and where the text cuts off, display an ellipsis which indicates that there is more text. The user should be able to see the full text when that particular cell is double clicked.

This will allow my rows to be of uniform size still allowing the user to look at the full text when double clicked and an ellipsis as an indication to the user that there is more text than what is displayed.

View 2 Replies View Related

Excel 2007 :: Cell Color Change Based On Values (Range)

Oct 2, 2011

How to change the background cell color based on value ranges(s)

I tried conditional formatting but it works between two values only, in my assignment I want to show:

River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)

I hope it is possible in Office 2007

View 9 Replies View Related

Excel 2007 :: Macro To Insert Rows Based On Cell Values

Dec 19, 2013

a macro to insert rows based on certain cell values in column A.

I have uto 300 rows of data. Below is an example of column A.



If (above the R) is an 8, I need to insert 2 rows above that R and directly below the 8.

If (above the R) is a 9, I need to insert 1 row above that R below, directly below the 9.

(Below the R there is always a minimum of 8 digits with the 9 and 10 being random).

I have excel 2007

View 5 Replies View Related

Excel 2007 :: Sum Cells Based On Date Range Input

May 28, 2014

I am using Excel 2007.

Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.


Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell

I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.

For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.

View 9 Replies View Related

Excel 2007 :: Data Validation Not Stopping Invalid Input?

Dec 1, 2011

I just have a basic data validation list. I used "List" and checked the right boxes and the file has been working before. Now the same file does not stop the user from typing in anything.

I re-did the same data validation in a new file and it works. Was there something in the file that prevents it from working?

I have Excel 2007. I saved in both xlsx and xlsm formats

View 5 Replies View Related

Excel 2007 :: Not Being Allowed To Input Formula With Reference To Another Workbook

Feb 13, 2012

I am having trouble making any formula references between 2 different workbooks.

For example, I being typing out my VLOOKUP function on 1 sheet, as soon as I get the table argument, I switch over to the other workbook in which the table is, and I no longer have the VLOOPKUP function active.

I am having this problem for any formula in which I am trying to reference this workbook.

I have ensured they are both saved as Excel workbook documents. I am using Excel 2007

View 3 Replies View Related

Excel 2007 :: Data Validation Based On User Input?

May 24, 2012

In the spreadsheet shown below I would like the user to select a project via a dropdown list in cell B2 which is from the data set shown in row 7 downwards. Then based on the project they select, they need to be able to see all of the locations associated with that project and choose in B3. Finally they then need to be able to select a team which is associated with the project & location combination chosen in cells B2 and B3.

Excel 2007
Project3Location4Team56ProjectLocationTeam7Project 1PerthTeam 18Project 1MelbourneTeam 29
Project 1SydneyTeam 110Project 1Brisbane Team 111Project 1Brisbane Team 312Project 1DarwinTeam 413
Project 1DarwinTeam 514Project 2PerthTeam 315Project 2PerthTeam 416Project 2MelbourneTeam 117
Project 2MelbourneTeam 218Project 2SydneyTeam 419Project 2Brisbane Team 6

View 9 Replies View Related

Using Matrices In Formulas, Using Letters As Input In Userforms

May 27, 2006

I have a matrix with default probabilities. I have this matrix in my worksheet. The user will give the number of periods to be calculated with and it will result in a new matrix with default periods over time of choice.

Private Sub UserForm_Click()
Dim numberof_text_Change As Single
Dim initial_text_Change As Single

Selection.FormulaArray = "=matrixpower(R[-10]C:R[-2]C[8],numberof_text.value)"
End Sub

matrixpower is a function that works perfectly well. It takes one matrix as an argument and the number of periods to use. It then simply computes the chosen number of powers of my matrix. I have a userform that has an inputbox called numberof_text which specifies the number of periods that the user wishes to use in calculating the chance of default. Hence I would like to use this variable as an argument in the formulaarray. This doesn't seem to work! I only get "#VALUE!" in every cell. If I replace "numberof_text.value" in the matrixpower function with a number it works fine. What to do?

What the function needs to do is take an argument which is the matrix I have on my spreadsheet. Take the number of times to take powers of the matrix and print it on a pre-specified place on the worksheet. If I cannot use variables with FormulaArrays, then is there another good way of choosing the matrix to use with "powermatrix"?

View 2 Replies View Related

Excel 2007 :: Combine Text And Date1 And Date2 Into One Single Cell?

Mar 12, 2014

I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .

[Code] .....

And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?

View 7 Replies View Related

Excel 2007 :: Macro To Insert A Text Box Auto-sized To Fit A Cell?

Nov 30, 2011

I am trying to write a Macro that will insert a Text Box that auto-fits the shape of a cell to hide its content. Once finished, the Macro will need to lock the cell and the text box so the contents of the cell are hidden. The idea is that I want to share a spreadsheet with someone but want to hide individual cells for various reason.

Sheet1A1SAMPLE DATA2sample3sample4HIDDEN5sampleExcel 2007

I tried to record a macro as a starting point but it recorded nothing. I searched around and it seems to be an issue without a solution.

I could obviously change the formatting and the contents of the cell but the idea is to preserve the contents if possible.

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved