I need to count how many times an input in given on a same cell, and doing so on the hole column. Like when I enter "x" on cell A1 and it adds 1 on B1. If the input on A1 changes then comes back to "x" it adds once again 1 to B1.
For one Row I'm using this code but I really can't reproduce it on the others.
[Code] .....
I'm using Office 2007.
I am trying to simplify a type of gannt chart bar across a spreadsheet. The spreadsheet has dates across row 3 that are calculated from the first cell F3 with =F3+7 to populate the rest of the row with dates. I want to be able to input a start date in D4, then all the other titles in column A. This start date will start the coloured bar at that start date in the chart, I will then copy/drag that start date cell for however number of weeks for the duration and I want the finish date to auto populate E4 with the finish date and also auto populate the numbers of weeks in C4 for that bar.
Excel 2007ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANA
OAPAQARASATAUAVAWAXAYAZBABBBCBDBEBFBGBHBIBJBKBLBMBNBOBPBQBRBSBTBUBVBWBXBYBZ
CACBCCCDCECFCG1D42342McArthur River Mine Power
[Code]....
The cell content is to be 0-7 characters in length.
Alpha characters only, i.e., no numeric.
First character must be uppercase.
Remaining characters may be lowercase or blank.
Is that possible to do in MS Excel 2007?
I am working in both 2003 and 2007 Excel.
This is a simplified version of my worksheet:
I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".
Now using info found in an old post, I can achieve this with a combination of data validation and code:
=OR(A2="SYDN",A2="ADEL") for the validation and for the code:
[Code] ......
The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.
I have attempted to attach a sample worksheet : Xl0000003.xls
I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).
I attached an image diagram that may better represent what I am trying to do.
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
Excel 2007
A
B
1
Grouping
Number
2
[code]....
I am trying to auto fill one cell with one of several names using different values from another cell. Ex: when one of six numbers (100, 101, 102, 103, 104, 105) in input in A2, I want B2 to display a name (Joe, Tom, Steve, Fred, Tyler, Todd) that corresponds to that number. Cells in columns A and B will be formatted as text. Using Excel 2007.
View 9 Replies View RelatedI am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
I just have a basic data validation list. I used "List" and checked the right boxes and the file has been working before. Now the same file does not stop the user from typing in anything.
I re-did the same data validation in a new file and it works. Was there something in the file that prevents it from working?
I have Excel 2007. I saved in both xlsx and xlsm formats
I am having trouble making any formula references between 2 different workbooks.
For example, I being typing out my VLOOKUP function on 1 sheet, as soon as I get the table argument, I switch over to the other workbook in which the table is, and I no longer have the VLOOPKUP function active.
I am having this problem for any formula in which I am trying to reference this workbook.
I have ensured they are both saved as Excel workbook documents. I am using Excel 2007
In the spreadsheet shown below I would like the user to select a project via a dropdown list in cell B2 which is from the data set shown in row 7 downwards. Then based on the project they select, they need to be able to see all of the locations associated with that project and choose in B3. Finally they then need to be able to select a team which is associated with the project & location combination chosen in cells B2 and B3.
Excel 2007
ABC2
Project3Location4Team56ProjectLocationTeam7Project 1PerthTeam 18Project 1MelbourneTeam 29
Project 1SydneyTeam 110Project 1Brisbane Team 111Project 1Brisbane Team 312Project 1DarwinTeam 413
Project 1DarwinTeam 514Project 2PerthTeam 315Project 2PerthTeam 416Project 2MelbourneTeam 117
Project 2MelbourneTeam 218Project 2SydneyTeam 419Project 2Brisbane Team 6
I export data into Excel format from a corporate reporting tool. 1 column includes a product description in text format, however, due to the many different products I need to count the number of cells based on a single word in the product description.
Hypothetical Example:
The report contains various information about vehicles. The product description exports to a single column and may include "Ford Fusion", "Ford Focus", "Chevrolet Malibu", "Chevrolet Impala", etc. I only need to count how many cells contain information about Fords and Chevrolets. The model detail is not needed.
I'm able to count if I enter the complete and exact make & model description, but want to avoid this due to the large quantity of products.
I'm using Excel 2007, on Windows 7, 64 Bit Enterprise
I am wondering how can I count different color condition color cells?
I am currently using this UDF,
Code:
Function ColorFunction(rColor As Range, rRange As Range, Optional SUM As Boolean)
Dim rCell As Range
Dim lCol As Long
Dim vResult
[Code]...
However, this code count the entire conditioned color cells that I have. What I want is for the code to count two different colors within the same column range (like B1:B10). For example, I have 3 red color cells in range B1:B10 and 7 green color cells in range B1:B10. So, I want it to count 3 and 7 seperately rather than giving me the total of 10.
Important Note: As it is a conditioned coloring, there is no fixed coloring as to which cell will have the red or green since it is based on conditions.
One last time, I am using Excel 2007.
I would like to get the count of unique values in my 2nd column using my values in 1st column as the criteria. Below is my example of my data set.
EFGH5DeptHC
6A304794A17B86122B38B86179C39B90050D1310C82705
11C94955
12C308165
[Code] .........
Excel 2007
I would like to see the count on column H (highlighted in yellow).
I'm using excel 2007, here's what I need.
I want to count the number of cells in a range that have text in them (any text at all) but not count them if they have numbers in them or are blank. How would this formula be written?
I want to count the number of duplicate rows where the exact text in columns A and B match. An example is as follows, where column C would be the desired result. Note that there are hundreds of different text values of column A and hundreds of column B, I just simplified the example.
Excel 2007
ABC1AX72AX
3AX
4AX
5AX
6AX
[Code] ......
I am applying conditional formatting on a range of cells. I have 2 conditions to color cells in different colors. Once I enter data, cells get colored corectly according to conditions. What I want is to count how many cells are colored by conditional formatting.
I tried using VBA --- Evaluate formula for each cell and count if TRUE.
I observed, for Excel 2007, as the condition is applied on the range, I expect the formula to be changed dynamically for each cell with appropriate addresses, like for A1, if am referring to cell C1, for A2 it should automatically refer to C2.
And excel takes care of this cells are colored correctly,however, when I try to check the 'FormatCondition' in VBA, I get only one formula for entire range. SO I can not use evaluate to find if the condition is satisfied or not ?
Is there a formula to count empty cells on a excel sheet?
View 4 Replies View RelatedI have a .csv open in Excel 2007 that looks like the following
Code:
1 566
1 566
1 566
2 341
2 341
3 566
3 566
3 566
3 566
...
There is a one-to-one relationship between Column A and B, but B is not unique (but can only take a small set of valid values). I wish to query how many id's (Column A) contain a particular property (Column B). If the example above ended before the "...", I would like to get as the output:
Code:
566 2
341 1
because the property 566 is owned by two id's (1 and 3) and the property 341 is only owned by the id 2.
The values in columns b:d range from 000-999. I need a formula that will count the number of digits in B:D that match the 3 values in H1 without counting a digit twice. The existing formula counts a digit twice, like the value in H4.
DIGIT HITSABCDEFGH10,1,2209/09/132192191222309/09/134824821441409/08/131191191112509/08/139799792550609/07/137177171551709/07/138668662000
Excel 2007Worksheet FormulasCellFormulaE2=B2&C2&D2F2=SUM(B2:D2)G2=MOD(F2,10)H2=SUMPRODUCT(--ISNUMBER(FIND(","&$B2:$D2&",",","&H$1&",")))E3=B3&C3&D3F3=SUM(B3:D3)G3=MOD(F3,10)H3=SUMPRODUCT(--ISNUMBER(FIND(","&$B3:$D3&",",","&H$1&",")))E4=B4&
[Code] ......
I'm working on a project and need some assistance. Using Excel 2007, how do I add up the total of the word "apples" to a cell.
Example: If Cell A1,A10,A25,A30 all have the word apple entered, how do I add them up in lets say cell B10.
Also, I need to do it where I can enter multiple words in 1 cell and have it organized according to how many times the word is used.
I am making process TAT(Turn Around Time) which required following information. In Excel 2007.
1-Count number of days between two dates where working days are (Sun to Thursday). So required to exclude (Friday,Sat + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 22
D1-Days between two dates 21
E1 To E10-Holidays
2-Count number of days between two dates where working days are (Sat to Thursday). So required to exclude (Friday + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 27
D1-Days between two dates 26
E1 To E10-Holidays
Note : Any weekend (off days) dates listed in holidays should not effect the query.
Two formulas which I need in Cells E74 and E75.
Basically the formulas will depend whether the entry in D73 are Yes or No
in cell E74, IF D73 = ‘No’ then E74 = D74 + E70 ELSE IF ‘D73’ = ‘Yes’ then E74 = E70
in cell E75, IF D73 = ‘No’ then E74 = D74 + E70 ELSE IF D73 = ‘Yes’ then E74 = E70
Excel version 2010
I am using the below code to enter the data in Cell "D" & "E" of the worksheet.
Dim a, b As Integer
a = WorksheetFunction.CountA(Sheet2.Range("C:C"))
ActiveWorkbook.Sheets("Retailing Data Sheet").Activate
'If Range("C" & a + 1).Value "" Then
[Code] .......
But, If someone wants to enter the data manually into the Cell "D" & "E" its allowing which i dont want.
It should be enter by using the form only...
Using excel 2003, Workbook has several sheets, all sheets are protected workbook is not. I have my cells containing formulas locked, I have unlocked the other cells that require input of various data. When the user goes to type in a "unlocked" cell, (to over write the now obsolete data) it will not allow the user to delete the data, the curser remains a cross and the formula bar or the cell itself will now allow any changes.
I have double checked that the cells are unlocked. I can enter data after the last entry in the unlocked row and or column, but I want to be able to "cut or delete the data that is no longer need and begin entering data from the beginning cell of choice. I want to copy this "old" data to an archive sheet, but it will now allow me to select it.
Example: I have 6 columns starting, (a to f) the formulas are in columns e and f and start at row 4 These columns are locked and hidden. Columns a,b,c and d are unlocked for user input. All data is started from A5 which I want it to start from each time the old data is deleted and new data entered. If I place my curser on any of the cells in the e and f rows, the cursor remains a cross which is what I expect it to do, but columns a to d are doing the same thing, they are acting as if they are locked OR atleast those cells in the a to d areas which have existing data, as I can enter below.
I am trying to create a UserForm in Excel 2010 that will look for a part from our database (or on a specific Sheet, possibly a hidden sheet), then add specific data from that part's row into a new line.
More Specifically:
| Part # | Description | Category | SubCategory | Cost | Labor Hours | Weight | Etc |
I want to be able to input the Part #, and have it automatically add specified information to sheets 1 and 2 and those two differ. 1 is our Quote Sheet, and 2 is our bill of materials.
Also, I need each piece of information to go to a specific column (ex. Cost always goes to Column K)
What I have now is a broken UserForm that references a DOC file with a Table, but I need something a good but more complex.
Ideally, what I want is to have 4 ListBoxes where you choose Category --> SubCategory --> Make --> Model then have several CheckBoxes below that would determine whether to add a part (Cost, Labor, Weight).
The reason for this is because we have no need for the Cost or Labor Hours in our Bill of Materials, but need that information for our Quotes. And we generally don't need Specific Dimensions in our Quotes, but DO need them in the Bill of Materials...
Can I make it so that it will insert Pre-Specified information into both sheets at the same time?
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
Whenever she clicks on a cell, the cell to the right of it is also selected. When she tries using tab to move to a new cell, she can only move between the two selected cells. Same with using the enter key. As such, it is extremely difficult for her to modify only one cell, since she always has two selected.
The F8 key, as well as Ctrl+F8. However, pressing the F8 key only adds more cells to the autoselection, and Ctrl+F8 allows her to select one cell, but also highlights the cells around it, and when we tried to select other cells, every cell we clicked stayed highlighted.
Additionally, sometimes when she clicks a cell, it will just select that one cell. Click it again, and the problem is back. I haven't been able to determine any patterns to this behavior, and I know there is no problem with the input (the keyboard and mouse are standard-issue in our lab, and we keep them well maintained).
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.