Logical Formula With Output Based On The Text Input

Dec 2, 2009

Sometime itís so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isnít . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then itís should equal to the value in the box C7. Here is the formula I wrote that doesnít work.

View 4 Replies


ADVERTISEMENT

Web Based Input Output

Feb 14, 2007

I got a question where I cannot think of a good descriptive title for, I have seen this done but do not know how it is done. An internet user inputs data onto a web form, and and presses a submit button. The submitted input is 'processed' on a through excel and outputs the result back the internet user.

Two questions
1 - what is a good title for this?
2 - how is it done?

View 3 Replies View Related

Automate Calculation Of Output Based On User Input

Nov 2, 2009

What I am trying to do is get the ROW 13 and ROW 18 outputs depending on inputs in ROW 2 to 5. Inputs in ROW 2 to 5 can have any value in any year. I would like to perform the calculations if the value in column U is 2 (if 1 then no action required)

I don't need ROW 10, 11, 12 separately if that is easier ...I am interested in getting the ROW 13 basically.

View 6 Replies View Related

Copy Input Data To Output Table Based On Variables

Mar 20, 2008

For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)

I plan to use command button " CommandButton1" on input sheet to start the calculations

Here's what I want to do after pressing the " CommandButton1" :

1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.

2.for empty cell in the input table paste 0 (zero)

3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output

4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1

5.Do this for all cases (in actual workbook there will be more than 100 cases)

View 9 Replies View Related

Index - Match Function To Output Data Based On User Input

Apr 30, 2009

I have a list of data that I'm using the index - match function to output data based on user input.

For example, I have:

1 10
2 15
3 20

So when '1' is selected another cell outputs '10'.

However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.

View 5 Replies View Related

Excel 2007 :: Userforms - Input Cell Value (via Text Box) And Output Corresponding Values From Resulting Row

Jun 24, 2013

I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).

I attached an image diagram that may better represent what I am trying to do.

View 9 Replies View Related

Finding A Formula Based On Text Input Into A Particular Cell

Aug 22, 2014

I do data entry for a driveway company. I get addresses and phone numbers, and then call the people to offer services. I keep track of my calls on the spreadsheet, color coded for my results, green for leads, yellow for voicemail/no answer, and red for not interested.

I have formulas in cells M2 through M8 to give me my overall stats for the calls I have made, it filters them by color for leads, missed calls, and rejections, and a couple other stats (mostly for my own curiosity)

What I'm trying to add is the cells L10 to M13, I want to be able to input a date, for instance 8/15, and have it run the same stats, just for that day essentially. So, I need it to search the last 2 columns in the table for the text that I input into cell M10, and then run the color based formula on those cells, and total them up in the appropriate cells, M11, M12, and M13.

The 2 Stats tables are the same at the moment in the sample, as I only included one particular street that I have mapped, my actual table is nearly 3000 rows.

View 3 Replies View Related

Transferring Of Input From Input Cell To Output Cells?

Jun 8, 2014

I would like to know if it is possible to transfer values of cells this way?

I've attached the excel file for easier reference.

View 3 Replies View Related

Text Output Based On Combination Of Cell Values?

Mar 9, 2014

I'm tying myself in knots when trying to combine logical formulas to return a text value based on multiple cell values.

Cell A1 can equal 1-10, and cell B1 can also contain the values 1-10.

I want C1 to display the text "YC" if B1 value is equal to 9 or 10. I want C1 to display the text "SC" if B1 value is 5-8, and A1 value is 4-10. Any other combination of values should return a blank cell.

I tried splitting this into two components before trying to make it fit into a single equation, and i can achieve the first condition of display "YC" =IF(AND(A1>=9,A1

View 3 Replies View Related

Offset The Input Or Output References

Jun 11, 2009

the actual output of the error message when I run my macro.
To repeat it, it says, "Regression - Having trouble offsetting input/output references"

The two button choices that appear on the bottom are "OK" or "Help." The OK button allows the macro to keep running (until it finds that it cannot find the regression output that was supposed to be created.

View 11 Replies View Related

Input/output Values Into/from An Array

Nov 6, 2009

I have a long list of values, a few thousand lines, that I need to input into an array so I can run a formula on the values in the array and then take those results and put them into another array which I can then call to output down a different column. Is there a faster way to accomplish this than the typical For Loop with the activecell.value and activecell.offset commands, that just takes forever.

View 15 Replies View Related

Multiple Output From Any Cell Input

Sep 18, 2006

Im working a spredsheet for my work, it is a database of qualifications for certain employees. There are about a hundred different qualifications and about 20 different employees. And some of the qualifications overlap. I would like to input a certain date in one of the cells, and have it copy into some of the other cells where the quals overlap. But i would like to input that date into any of the cells that overlap, not just one.

View 12 Replies View Related

Logical Function: Logical Test With Three Possible Results

Apr 8, 2009

I am trying to create a logical test with three possible results:

h2 <10.2 "needs improvement"
(if false) h2=10.2 "meets standard"
if false h2>10.2 "exceeds standard"

Basically, I am referring to a cell to determine if it meets, exceeds or does not meed a specific standard. In this case 10.2.

View 4 Replies View Related

Link Input To Auto Output In Next Cell

Apr 9, 2014

Is it possible to have a code of say numbers or letter assigned to an explanation of that said code which automatically appears in the next cell?

See attached spreadsheet : Auto fill next cell with predetermined answer from list.xls

View 2 Replies View Related

Input Of Names Repeat As Shown In The Output

Dec 15, 2008

i have uploaded a file.....basically i have an input of names and i want to repeat these as shown in the output..is this possible.

View 5 Replies View Related

Clear Output Box When Input Dropdown Box's Are Changed

Jun 7, 2013

I got all three dropdowns to be dependent on each other, now however, whenever I change the value in the top Input Dependent Box M39, I would like M43 & M47 to appear blank. I want these two cells to appear blank until you select the dropdown which will allow you to select your values of choice.

View 2 Replies View Related

VBA Function: One Range As Input, Two Ranges As Output

May 10, 2006

I want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:

Public Function xyz(a() as Variant) as Double

There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?

A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.

An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.

View 7 Replies View Related

Find User Input & Output Found Row

Apr 10, 2008

I am trying to write a match function to return the row of the value I search for. It is properly returning the value of the row I searched for. What I need to know is how do I get it to spit out information in the rest of the row. Here is my code so far:

Sub Rectangle2_Click()
Dim x As Long
Dim Row As Long

' Brings up input box
x = InputBox("Please Enter Tool Information", "Search")


'Exits if nothing is entered in the text box
'If x = "" Then Exit Sub
'MsgBox (SearchString)
'SearchString = x
MsgBox (x)

That gives me a Type mismatch error when I uncomment it out.

Something I was adviced of before in a situation like this way to Concatenate the columns, e.g
=A2&B2&C2&D2&E2&F2
in a far left column (insert 1 if needed).

That was supposed to be so that I can search through multiple columns. When I do that to test it, it never comes up with results. It always comes back as 0 meaning it wasn't found.

View 4 Replies View Related

Use IF And AND Functions To Create A Basic Input-output System

Nov 18, 2009

I'm trying to use IF and AND functions to create a basic input-output system. The problem I have (more details below) is the 64 limit when the potential inputs could be infinite.

For values entered into a cell between 1 and 10, this should produce an output of 0.00 in another A value higher than 10 should output as 1.00, and from then an extra 1.00 is added for every '10' added. There is no limit on the input ie 1 = 0.00, 11 = 1.00, 29 = 2.00 and so on.

View 2 Replies View Related

User Input Returns Selected Form Output

Dec 29, 2013

Have a person Input an Assembly Number and,Have Excel return a list of Part Numbers, their Descriptions, and a Quantity for each Part Number that will need to be packaged with the Assembly Number that was Input.

The output needs to be in the form of a check sheet (I can play with the formatting if I can get the information out) for the one Assembly Number input.The output can either be in a separate spreadsheet or a User Form. The spreadsheet is easier for me to work with but the User Form looks cooler.

I can use a VBA Function to Input the Assembly Number but then I need some way of searching a small table (about 20x20 cells) to find the matching Assembly Number and then return the Part Numbers, etc. to a check sheet so the parts can be packaged. Each Assembly Number can have several Part Numbers associated with it. Either unique to that Assembly Number or common to other Assembly Numbers. The Quantities can also be unique or common. A couple of simple examples might be:

Assembly Number - ANA0134
P/N Description Qty.
ANA0118 Widget thing 2
ANB0554 Thing Widget 4

Assembly Number - ANA0431
P/N Description Qty.
ANA0118 Widget thing 3
ANB0554 Thing Widget 4
ANC0023 Plain Widget 1

View 4 Replies View Related

Multiple Input Boxes & Output To Specific Cells

Jan 27, 2007

> When the workbook is opened I want a box to appear with a message and 4 choices (as buttons?).

> Based on the button clicked I want 1 of 4 new boxes to appear (replacing the first box) and ask for input values.

>I then want the inputs to be written to specific cells on a specified worksheets inside the workbook.

View 2 Replies View Related

How Do I Autofill Colors, Based On Input Of Text

Jun 16, 2008

i'm trying to do is have a formula that when certain text is typed into column 'b' (fmc, nmcmc, etc... anyways..) when an airplane is 'fmc' its 'green' and i want the aircrafts tail number block in column 'a' to autofill in with a green color, and when its 'nmcmc, i want it to be red. when its 'bq' i want it to autofill in as yellow.

View 10 Replies View Related

How To Input Text Into Cell Based On Database Using Form

Jan 23, 2013

i was wondering if it was possible to move database entries from sheet to sheet using a user form ? any examples for this ?

View 1 Replies View Related

Matching Text On Different Sheets. Formula To Input ....

Nov 15, 2006

I have a workbook with two sheets (MainSheet and Stats)

In the Main Sheet Column A has a name entered which is surname plus a christian name e.g Smith Thomas

This name could be anywhere in the A column from the bottom up

In the Stats sheet Column A has a surname and Column B has a christian name e.g Smith in ColA and Thomas in Col B. Smith and Thomas will always be on the same row but could be in any row on the sheet from the bottom up.

I need a formula which can compare the name in the MainSheet with concatinated name from the Stats sheet if the names are the same then change Cell H1 to the text "Match"

An example might be that on the MainSheet A16OO = "SMITH TOM" on the Stats sheet A2="SMITH" B2 = "TOM" .
The formula would be on the Stats Sheet in H2 which in this case would = "Match"

View 9 Replies View Related

Logical Commands Based On Criteria?

Mar 30, 2014

View attached file. I have a complexity rating that I have developed for a set of projects that I am working on. Management of my company have signed off on this matrix as they believe it is most appropriate. In my projects pipeline tab, I have created the risk and complexity ratings using logical commands.

projects.xlsx‚Äé

View 10 Replies View Related

Insert Vertical Text In Cells Based On Textbox Input

Jul 25, 2006

I am designing a from with a variable number of titles. The user should be able to insert a title into a column by typing in the title that he wants into a text box, and pressing a command button that I have created ( named add). The problem arises when I try to get the text to lie vertically as opposed to horizontally (in the cell, not as a text box. If this can only be done as a textbox, let me know). Is there any way to do this?

View 5 Replies View Related

Can't Autofill If Function With Text In Logical Test

Jun 18, 2014

My logical test is =IF("D2"="E2",1,2). When I autofill or copy down, the row numbers do not change to "D3"="E3", etc. How do I delineate text and also have the ability for autofill or copy to change the rows as it goes?

View 2 Replies View Related

Cell Based On Formula And Allow User Input?

Jan 13, 2010

Cell A5 has a Yes_No pull-down list for data validation. In cell B5, I want to display the value 0.002 only if A5 is "Yes". If A5 is "No", I want the user to be able to enter a number into the B5 cell without destroying the formula.

View 4 Replies View Related

Logical Formula For Date

Jun 22, 2014

In column N I have a list of dates. In column Z I want to display either "Yes" where the date in column N has already passed or "No" if the date in column N has not passed. The formula I'm using in column Z is =IF(N2<TODAY(),"Y","N") however it just gives me "No" on every row regardless of whether date is passed or not.

View 11 Replies View Related

Logical Formula: Check In Q24 Such That If (P24=#DIV/0!,0,P24)

Dec 16, 2008

I need a solution for this situtaion! Iam using a french version of excel2003!
I have #DIV/0! in P24 (i.e an error value) So I need to check in Q24 such that if (P24=#DIV/0!,0,P24). I need to have a logical formula for this one!

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved