Writing code in VBA for splitting data into multiple sheets?
The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.
Following is the input sheet, the data needs to be split based on entry in the column "Job Type".
I have a table in Excel 2007, one set of data in a column contains cells with data such as = AA701 DIS34 5283000, Z00IS0750 Now these AA codes DIS codes 5283 codes and Z00 codes can all be different!! and they are all within the same cell.
What I need to be able to do is find out which AA code which DIS code which 5283 code and which Z00 code is reported within each cell on each row?
So could I split them out into different cells via VBA? or can I do some kind of lookup that picks up a AA code (for example) ?
The constraints I have is this is downloading from a web query, I do not have the ability to alter the way the original data is coming across, I can only alter it once I have received it - refresh and then alter it again.
I am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.
The sheets will be updated every 3 months and merged again (-thus replacing the old data).
I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
#123456
789
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I have a sheet with about 200 columns of data and 1000 rows . I'd like to split this sheet into multiple sheets based off of info in column A. Column A contains numerical categories 001, 002, 003 etc So my result would be a sheet for each numerical category with all info from previous sheet. Each category contains 5-30 items associated with that category. Any other way to split this without sorting, copying, and pasting?
I'm currently using the following code (that I found online) to take a list of data and copy it to specific sheets based on the values in Column C (there are only 4 columns in my data set). The issue I have with it is that it's meant to create the sheets from scratch every time. What I could like, however, is for it to copy the data to preexisting tabs that are already named with the sames values that are found in Column C. This macro will actually perform that but the down side is it wipes out everything that's on those sheets but I cant have it do that. Is there a way to either modify this sheet so it only copies the four columns and only pastes the four columns onto the sheets?
Sub SplitData() Const NameCol = "C" Const HeaderRow = 2
I have sets of data (A1....F50000 or more) that I need to sort out based on the cell value in column F. Based on the cell value I would like the info on the row (A to F) put into a different sheet. There would be 8 different sheets and each sheet would include 1 to 50 different sorts from column F.
The macro could start with one material sort each and I could fill in the rest of the sorts. The 8 different materials (one for each sheet to start) could be "34b2p""ptop27""pdw19""p58leg""ppdpts""mirror""Pdoor""bent""p4545".
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555 ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE Employing ARECountry Employing ARECHCM Supplier IDVehicle Investmt. shares / Awards at termination dateMatching Shares at termination dateTermination
I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME NINO CODE NO OF UNITS
Smith AB123456C 8AIA 1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
I need to split one row of data into multiple rows. I have one column which consists of a list of companies and Next to it I have a series of attributes for every year. I need to transpose the years into a single column and next to each year I need the values of the attributes.
Have a look at the attached file : Abrasives.xls.xlsx
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA AAA - description BBB BBB - description CCC CCC - description and so on..
I would like to move the descriptions from column A to column B: AAA AAA - description BBB BBB - description CCC CCC - description and so on...
I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
[IMG][/IMG]
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
and
Microsoft Excel 2007 Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
So I am trying to pull data from multiple sheets. I've gone through the thread, but haven't found an answer yet (or didn't work hard enough). On Sheet1, yellow highlighted column, I am trying to look up the I.D. Code for 36 month residuals. As you can see, I have to use multiple conditions on different worksheets.
I have to use most of Sheet1 columns to find the answer. I just can't figure the formula out.
As part of report consolidation I need a Macro that can read through all the files in a particular location(Say a folder path) Pull the data for each unique products into separate sheet
In the example below : All the rows with "Chocolates to sheet 1" , Drink to Sheet 2 and so on Since the products in column 3 can vary the unique sheets need to be created at run time based on the source data
I have a sheet that contains a Microsoft Query (SQL) data connection. In cell C3, I have the month name and I also have a year cell (C4), which contains just the year based on what the current month (=YEAR(TODAY())) is.
For this example let's use May (C3) and 2013 (C4)
C3 and C4 are used as parameters for the SQL query, so if I change the month to January and the Year to 2010, data is refreshed to bring in that data.
Works smashingly.
I then want to add 11 more sheets (12 total), so each sheet is a month. The value in cell C3 on each sheet will be the month name.
If I just copy this sheet 11 times, Excel adds 11 extra data connections; 1 for each sheet. As the query in each sheet needs to be exactly the same, I don't want this. I want the 12 sheets to use the same data connection, only with the specified parameters at the sheet level.
Otherwise, if I need to add or remove a column, or change a column name, rather than just doing it once, I'd have to do it 12 times.
This can't be right, surely, as that would be the most ridiculous design flaw I've ever seen in a piece of software. How can having the same query 12 times be a good thing?
I'm a bit concerned that googling 'excel data connections multiple sheets' always wants to be 'excel multiple data connections one sheet' - I want 'excel multiple sheets one data connection'
I have a workbook that contains something like 50 worksheets and they all contain data with the same columns, for example column A is Project, column B is Project Name, etc. I need to convert data in each worksheet into an Excel Table. There has to be an easier way than manually converting each worksheet into a Table. However, when I group all of the sheets, the option to Insert a Table is not available even though the data starts in the same row and contains the same number of active columns in each worksheet. Is there an easier waty to insert a table in all of the worksheet simultaneously?
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date Reference no. Name Employee ID 16-Feb-12 S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
Scenario: Master List, which has all the U.S. states in it.
What I Need to Do With It: Divide out EACH state's information and put it on a seperate worksheet.
I've only recently started using macros (to format various documents for easier printing), but now that I'm starting to understand them conceptually, I'm thinking there Should Be some way for me to program a "macro"-type thing to run on the master list and come out with all my state lists, looking beautiful in seperate files.
