I'm new to excel and have had a hang up with the MkDir feature. I would like to check if a folder exists based on a certain cell value, and then create the directory if it does not exist. This is what I have so far.
Dim newFile As String
Dim Path As String
newFile = Range("D5").Value & " " & "op" & Range("B200").Value & " " & Format$(Date, "yyyy-mm-dd")
Path = Range("A210").Value
[Code] ..........
Is it possible to have a macro to look urls in colA and respond back in colB if the url "found" or "Not Found / #404"
Sheet1
AB1http://marketheist.com/2010/09/02/Found2http://marketheist.com/2010/01/02/Not Found / #4043http://marketheist.com/2010/09/05/Not Found / #4044
Excel 2007
I need to check if a folder exists and if not then create it. not sure how to go about this
View 2 Replies View RelatedIf the data entered in Column "I" starting from row4, exists in range "X4:X12" then "Pend for audit" should appear in Column "R" of the corresponding row.
below is the coding Iam using.
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName As String
Dim CName As String
Set Cells_Changed = Target(1, 1)
[Code]...
I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.
The range to compare will be over multiple columns and multiple rows.
getting a function working within Excel 2010. What I'm trying to do is to first look in a specific directory and loop through each foldername then check to see if the foldername exists in column B of my worksheet. If the foldername exists then check Column E of the same row for a specific value ("assigned") and then make sure column F of the same row has no picture inside the cell. If those three things exist (column B foldername and column E "assigned" and no picture in column F), then add a picture to column F of the same row as the foldername with a hyperlink to a filename of "notes.one" in that specific folder. Then just loop through each foldername in the specific directory until all foldernames have been checked.
View 1 Replies View RelatedI am using excel 2007. I have multiple folder with multiple files inside like below
folder1
file1
file2
file2
folder2
file1
file2
file3
folder3
file1
file2
file3
i need output like
folder1 file1 file2 file3
folder2 file1 file2 file3
folder3 file1 file2 file3
I need to use a function like =filelist(a1) or =filelist("folder1") then it should list the files horizontally like above.
I can find no code that actually works. It seems to me that there is a gap in the available functions.
I need to get a listing of files in a named folder, into Excel 2007.
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I'm trying to sort all .xls files in a folder by modified date. I want most recent at top because then I will be cycling through and using the most recent version of files that have similar names.
Excel 2007.
The code I have so far is this:
Code:
Sub autolink()
Dim folderPath As String
Dim FileName As String
Dim wb As Workbook
[Code]....
But I need something before it sort the folder by the modified (or better creation date) because there are several files with similar names. I know know, I could put a date in the file name and look for that but I don't control the naming of the files.
I have been tasked with doing a work tracker so we can see what work operatives have done between a date range. The processing of the date range is being done in VBA.
The tracking info comes from an external table that is linked into Excel (version 2007). This table is also filtered.
The problem I have is that there are 3 different tasks that the operative can be doing (each has a different time on how long it should take to complete the task, however that is irrelevant for what I need).
This results in multiple entries in the table (min of 1, max of 3) for each operative. There is a seperate column in the table as well which has the total number of each task that they have done.
So for example the table looks similar to this.
Clock No - Task - Sum of task
239 ------- A -------- 5
239 ------- B ------- 10
239 ------- C ------- 15
What I want to be able to do is to get the sum total for the sum of tasks for the operative, so in the above example for operative 239 I want a value of 30
Is there a formula that can do this? (it is a filtered table so the formula needs to count only visible items)
I have tried playing around with
=SUMPRODUCT(SUBTOTAL(3,OFFSET($A:$A,ROW($A:$A)-MIN(ROW($A:$A)),,1)), --($A:$A=K414315))
but I cant get what I need.
I was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedI work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
how would you do the following in excel 2007:
"SUM numbers within a cell based on unique strings in another cell".
For example, how would i use formula to SUM the following numbers (and only the numbers for david and sam only once), 700+454+50+40+2+129+16
700david
700 david
454john
50buch
40daniel
2sam
2sam
129mike
16steve
send the sheet to an email address based on the email address in a cell.
The cell populates from a dropdown list a user selects.
The email will be sent to myself, and one authoriser. If a second authoriser is required then the first authoriser will send this on. I'm trying to make this simple, so when a user clicks a 'send' button on the form this happens automatically.
The code I'm using to send to myself is
Application.Dialogs(xlDialogSendMail).Show arg1:="bibbyd01@myemailaddress.com", _
arg2:="Auth Details"
Nice and easy. So how do I replace that email addres with the email address in a cell? I assume I have to create a DIM to hold the data, then use it to populate the address field?
I'm using excel 2007 if it makes any difference.
What im needing is something that will duplicate each row based on Column F as shown below... However I also need the duplicate row numbers added to Column G and then the original row deleted... I will try and show you an example of the input/output i would like to achieve: (also the first row can be ignored it will all be headers)
INPUT
ROUTE
NAME1
NAME2
ADD1
DESC
3
WOOD000001
PW
ID
[code].....
Im Having trouble with my Visual basic code in Excel 2007.
I'm using the code to hide two rows which works fine, however my code to hide the check box (second line of code)
I am working in both 2003 and 2007 Excel.
This is a simplified version of my worksheet:
I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".
Now using info found in an old post, I can achieve this with a combination of data validation and code:
=OR(A2="SYDN",A2="ADEL") for the validation and for the code:
[Code] ......
The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.
I have attempted to attach a sample worksheet : Xl0000003.xls
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
Using Excel from Office 2007, and WinXP Pro OS
I have a spreadsheet which contains 2 drop down pick lists in Field1 and Field2.
Code:
FIELD1 | FIELD2 | FIELD3
--------------------------------------------
In Cell A2, I have this set in Data > Data Validation:
Allow: List
Source: =CatList
If the user selects a value from the CatList range, then the drop-down options in Field2 are updated accordingly.
In Cell B2, I have this set in Data > Data Validation:
Allow: List
Source: =INDIRECT(A2)
The Ranges are as follows:
Code:
Cat1 | Cat2 | Cat3
---------------------------------------------
Cheese | Hat | Square
Trees | Cat | Circle
Bees | Sat | Triangle
Knees | Mat | Rectangle
Apologies | Bat | Octagon
I'd really like to be able to add a message into FIELD3, which is based on the value in Cat2
e.g. using pseudocode, something like:
If Field2 value = "Apologies" then put this message in Field3: "This requires approval from A"
elseif Field2 value = "Triangle" then put this message in Field3: "This requires approval from XYZ"
elseif Feidl2 value = "Bat" then put this message in Field3: "This does not require approval"
Basically this is for an access form, and I need to be able to add a feedback message to field3 based on what's in Field2.
I thought about using the INDIRECT option to add messages but I can't see how I'd do it. Maybe VB would do it, but I don't know it well enough.
I am using Excel 2007
I am trying to conditionally format rows based on the first cell in each row. I had this working in a previous worksheet and have gone through several examples based on answers in other threads but do not for the life of me know what I am doing wrong. I am using the conditional formating rules on the ribbon menu.
I have a range A3-W100 pre-formatted with generic data and formulae. Column A has no data. I want the text to change color for that row if the cell in column A is populated. The background and text are set to black to appear unpopulated.
When an item number is entered in column A3, the text color in row 3 changes to white. I can get this to work on one row but if I extend it through the range, all rows change. I want them only to change if the respective A cell is populated.
I am using
Formula is =A3>""
Format is Yellow,
Applies to =$A$3:$V$100
Stop if True is unchecked
All I can get is column B to change color.
I'm sure this will be an easy question, but I've been searching for awhile and can't seem to find an answer. I'm trying to write code in VBA that will check if a directory within c:documents and settings...my documents exists, and then save a file to that directory. The problem is, I'm having trouble finding the my documents directory. Is there some object or property that I could use to find the my documents path? Note that the worksheet that I'll be working with is in a separate directory, and therefore neither activeworkbook.path nor thisworkbook.path would be an option.
View 3 Replies View Related[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
a macro to insert rows based on certain cell values in column A.
I have uto 300 rows of data. Below is an example of column A.
R1
1
2
3
4
5
6
7
[Code]...
If (above the R) is an 8, I need to insert 2 rows above that R and directly below the 8.
If (above the R) is a 9, I need to insert 1 row above that R below, directly below the 9.
(Below the R there is always a minimum of 8 digits with the 9 and 10 being random).
I have excel 2007
I have a worksheet that has a number in cell K5 - the number is generated on "file open" code and is custom formatted as "TN"0000. Thus 1 appears as TN0001, 2 as TN0002 and so on. I am trying to save a copy of the workbook based on the this cells contents i.e. TN0001.xls, TN0002.xls etc. but the files are saved as 1.xls or 2.xls. The code I am using is
ActiveWorkbook.SaveAs Filename:="C:DataExcelFORMSDelivery Note" & Range("K5") & ".xls", _
FileFormat:=xlNormal, ReadOnlyRecommended:=True, CreateBackup:=False
I know I must make reference to format within the above....but how? if try something like
" & Format(Range("K5").Value, ("TN""0000")) & ".xls"
I get TN00000.xls
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I have an excel spreadsheet used to populate word documents based on a template file that is loaded like this....
View 9 Replies View Related