I am using excel 2007. I have multiple folder with multiple files inside like below
folder1
file1
file2
file2
folder2
file1
file2
file3
folder3
file1
file2
file3
i need output like
folder1 file1 file2 file3
folder2 file1 file2 file3
folder3 file1 file2 file3
I need to use a function like =filelist(a1) or =filelist("folder1") then it should list the files horizontally like above.
I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:
1st sheet:
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
I have 180 rows of data like this one in the first sheet
Second sheet(named sheet 1) is not used for this
Third sheet(named sheet 2):
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I am using excel 2007 and windows 7.
I was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedIs there any tool, or something else which can filter vertical rec
A1B1C1D1E1F1G1H1I1J1K1L1M1N1O1
ABCABCABCABCABC
I have pick the column C+F+I+L+O means i need to filter C in vertically,
I have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).
Nittie Query.xlsx
I am trying to make an excel sheet which has a 2 column drop down. For example I want to have a drop down list in column 1 and when I select "Item A" in column 2 "item A" 's phone number appears. If i select "item B" form the drop down this, "Item B's" phone number would also appear in column 2 and so on. how this is done (if possible) on Excel 2007? I was hoping it could be done from one workbook to another but If it is easier from one worksheet to another then that is fine too.
View 5 Replies View RelatedI can find no code that actually works. It seems to me that there is a gap in the available functions.
I need to get a listing of files in a named folder, into Excel 2007.
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
I have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.
View 2 Replies View RelatedI'm trying to sort all .xls files in a folder by modified date. I want most recent at top because then I will be cycling through and using the most recent version of files that have similar names.
Excel 2007.
The code I have so far is this:
Code:
Sub autolink()
Dim folderPath As String
Dim FileName As String
Dim wb As Workbook
[Code]....
But I need something before it sort the folder by the modified (or better creation date) because there are several files with similar names. I know know, I could put a date in the file name and look for that but I don't control the naming of the files.
I'm new to excel and have had a hang up with the MkDir feature. I would like to check if a folder exists based on a certain cell value, and then create the directory if it does not exist. This is what I have so far.
Dim newFile As String
Dim Path As String
newFile = Range("D5").Value & " " & "op" & Range("B200").Value & " " & Format$(Date, "yyyy-mm-dd")
Path = Range("A210").Value
[Code] ..........
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
Is it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
I have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I am trying to reference a vertical list on another sheet, in a horizontal list every 3 cells.
Have attached an example example.xls
I managed to found an array formula that return multiple values with a condition. Below the formula:
[Code]....
I am attaching a simple file. In cell O4 I paste the formula, and I drag it as much as I need. But my issue comes when the formula begins the calculations. I need to calculate 50 columns with over 9,000 rows each column (over 45,000 arrays). Imagine the processing load to my computer and the consuming of time.
Attached File : Return-multiple-values-horizontally.xlsx
I have over 300 rows with a username in the column A followed by 3 fields in the following columns B,C,D. I want to just sort all 300 rows alphabetically by column B,C,D.
Eg. Cormac, Santa, Atlas, Egg
After search Cormac, Altas, Egg, Santa.
how to do this easily in Excel without VB as I am not good as it.
I have a folder in my D drive where I used to keep my Text files after downloading it from our support centeral. I want to Import all these Text files in one excel sheet in a way that data of each file got append in excel sheet below previous file data.I am trying to do this through FSO but unable to do the same.
View 1 Replies View RelatedI am trying to import a list of outlook items into excel. These items are found in a folder somewhere within the vast network that is my organisations mail folder structure.
In my Outlook this folder structure looks something like this:
Myname@mycompany.com
- Inbox
- - Sub Folder
- Drafts
- Sent Items
Othername@mycompany.com
- Inbox
- - Sub Folder
- Drafts
- Sent Items
[code].....
I have an Excel Spreadsheet (2007) that contains over 500,000 records that shows Electric meter usage per month over a 24 month period per meter. What I want to be able to do is to select a meter row per number and copy is to it's own worksheet. At the end - I want to be able to have a seperate worksheet per electric meter number - that I can create a graph. If I go through all 9000 meters and copy and paste into a different worksheet - it will take me weeks to do manually. How can I do this automatically?
View 1 Replies View Relatedi am working with a large data set of excel files . I need to format the sheets in a specified way . i have recorded a marco that does this . I now have the problem of creating an automatic loader that opens the files , carrys out my macro , then closes the files.
For example i have a folder X that has 10 files inside it. i would like to be able to load the first file , carry out the macro, close the file move it folder y . Then look back into Folder X , take the first file it see's , carry out the macro , close the file , move it folder y , the go back to folder x and carrying out this until all the files are done and stopping when the folder is empty
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
"
JOES TOWING SERVICE [0123451]
123 STREET
CALEDONIA FL 12345
"
"BUBBA / SHOP
ACCURATE AUTO SUPPLY INC [0234567]
21234 HYDRAULIC DR
LOCKWOOD OR 45678
"
I am struggling with trying to create a Top 10 list in Excel 2007. I have googled and search the forum but could not find a solution. (Aplogies if i have overlooked a thread)
I have attached an example of my problem.
1. In Column F i would like to extract the names of the Top 10 performers, based on their respective score. Hence, based on the scoring in Column D, Column F should extract the Top 10 performer names from column A.
2. In Column G, same as above, but bottom 10 names
3. From the attachment, you will view some names are highlighted. I.e. Gary & Neil, and Ian & Michael. These are highlighted based on the fact that they have equal scores.
When extracting the Top / Bottom 10 list, i would like to rank the performers with same score differently. e.g. Gary & Neil, both scored 0%, hence they are equal. But in the Top 10 list, i would like to rank Gary higher as his absolute target is higher. (63 vs. 27) . Same applies to Ian & Michael, Michael should rank higher in the Bottom 10 List as his absolute target is higher.
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
For the last year I have been downloading cash register X1 and Z1 files onto an SD card. Each night's files (X1 & Z1) are stored in a new folder with the naming convention "RP + [DATE]", (EX: RP120910, [YYMMDD]). I have 265 folders! I need to go through each folder, select the Z1 file (I don't care about the X1, X2 or Z2 files) and rename each with the following naming convention: "Z1 + folder_name + .xls". For Example: Folder RP120910 contains the Z1 file named "Z1_T1729.ECR". After renaming, the file should be "Z1RP120910.xls". As the VBA code loops through each subfolder, selecting and renaming the Z1 files, I would like the new files to be placed into a new folder named "Z1Files". Note: All subfolders are currently in a directory named "RegisterFiles". I am using Excel 2010.
View 3 Replies View RelatedI have data in columns E through J under the headings of Monday-Saturday (E is Monday, F is Tuesday...J is Saturday). Then out to the left of the data, in column A, I have the week ending date (using Sunday as the last day of the week) which corresponds to the data under each day. There are multiple rows with different week endings but all the data is under columns E-J with the week endings in column A. So for instance, on row 13 the week ending in column A is 12/22/2013 (a Sunday) which means the corresponding data in the same row under columns E-J (the Mon-Sat columns) belong to 12/16/2013 (the Monday in the week ending on 12/22/2013), 12/17/2013 (the Tuesday in that week), 12/18/2013...and so on and so forth until 12/21/2013 which is Saturday in the week ending of 12/22/2013. Lastly, out to the right starting in column N and going horizontally out to column FD (will go out further as more days are added) I have the specific dates by day, it starts with 12/16/2013 and goes on incriminating by 1 day at a time until the end of all the dates included in the data (which at this point so happens to be 5/11/2014).
What I need done now is to take all the data which currently sits in columns E-J (the Monday-Saturday columns) and copy and paste it out under the correct specific date column that it belongs to starting in column N (going all the way out to FD) based on the week ending in column A. So with row 13 since the week ending in column A is 12/22/2013 the data in columns E-J needs to get pasted to row 13 columns N-S, then the same thing for row 14, except the week ending in column A row 14 is 1/5/2014 so the data in columns E-J row 14 needs to get pasted to columns AB-AG (AB is 12/30/2013...and AG is 1/4/2014). Below is the loop I came up with that accomplishes this, but for the reasons already stated.
Code:
Sub newtest()
Sheet2.Unprotect
Dim drd As Long
Dim rrd As Long
drd = 13
rrd = 14
Do Until IsEmpty(Cells(drd, 1).Value)
[Code] ..........
i want to make a dropdown list from excel 2007. I try data validation then allow then list then source but i cannot make the sheet 2 as the source of my dropdown list in sheet 1. i uses excel 2007 and my OS is XP.
View 4 Replies View RelatedI am creating a form using Excel 2007/XP, and am trying to make it easy to use for both people who want to click and people who want to type. I have a series of list boxes in the form that make it easy for the clickers, but I want the typers to be able to tab into the box and make a selection. For example, if the choices are Apples, Pears, and Grapes, I would like a user to be able to tab into the box, hit P and tab to the next box and have Pear be selected.
View 2 Replies View RelatedI have cells containing large drop down lists (offering many possible entries). Is it possible to get excel to "jump" in the list or complete the entry automatically? If i start typing "aut", it should the drop down entry "automation". For your information, I just use Define Name and Data Validation to create the drop down list. Is it must be using VBA code or I just can use Define Name and Data Validation which has been I created?
View 5 Replies View Related
