Excel 2007 :: Mouse Wheel Scroll Function Doesn't Work
Feb 8, 2012
I'm using Excel 2007. When I try to scroll with the mouse wheel, it doesn't do anything. If I hold down the control key and scroll with the mouse, it zooms in and out. So that works fine, but I can't do the basic scrolling up and down the document with the mouse wheel. There is no "Tools, Options" menu in 2007 so I don't even know where to find this type of option. The options available from the Office button are completely different.
View 4 Replies
ADVERTISEMENT
Jul 29, 2005
how to enable the mouse scroll wheel in VBA?
I'm talking about the little wheel in the middle of the two mouse buttons, the one that you can use to scroll up and down through documents etc.
View 8 Replies
View Related
Sep 16, 2012
Scroll with Wheel Mouse in ListBox?
View 1 Replies
View Related
Jul 18, 2008
How can i make my mouse wheel scroll an excel sheet sideways instead of up and down?
my sheets are only 5 rows big, but some 20 columns and its a pain to move around the sheet efficiently!
View 9 Replies
View Related
Sep 16, 2007
I have seen some code around that allows scrolling in listboxes using the mousewheel. I have also seen some code here on the forums about scrolling through a combobox embedded in a workbook. I have tried adapting both of these to suit a combobox on a userform but I cannot get either to work.
Here is the code that I used for the embedded combobox; I added it to the base code for the userform
I then added the following code to a standard module as stated in the forum post;
In the first section of the code there is a msgbox that never gets shown so I don't think code is recognizing the mouse wheel at all.
The second set of code that I used was set up to work with a listbox and it works perfectly with a listbox control. The problem is I cannot adapt it to suit a combobox and if I use a breakpoint to see what is happening Excel freezes.
The following code is added to the userforms code;
Then in a standard module I added the following code;
I added this section of the code;
I think this should only work on a Combobox but a Combobox does not appear to support the TopIndex value. Is there a way this can be setup to work with a userform combobox?
Sorry about the huge amount of code.
View 9 Replies
View Related
Aug 21, 2008
I am having problems with an Excel workbook I am working on. I have a sheet that has a number of controls added to the top of it. Two of these controls are listboxes. My problem is, if I am in the listbox navigating through it, and I accidently move the Mouse Wheel, Excel crashes and I get the usual, "Send Error Report" form.
I have seen that there are other people having this problem and that there are a number of solutions out there but my problem is a bit different. I have a few forms with listboxes on them, and while mouse wheel scrolling doesn't work, it certainly doesn't crash Excel. It only seems to happen when I have a control permanently added to the sheet. Is there any event handler for mouse wheel scrolls or anyway to disable them through VB?
View 2 Replies
View Related
Apr 8, 2014
Is there any method to disable Ctrl + mouse wheel function in excel 2013, actually I want to disable zoom in and out functionality but don't want to disable normal scrolling.
View 2 Replies
View Related
May 7, 2014
I have created a macro that a couple of us can run at the end of the day that looks in a preset folder and has whatever .xlsx files in that append to each other creating one .txt file. It then saves that .txt file and runs a batch file that strips off the .txt file extension. This is the format we need the ending file to be in so we can FTP it to another agency.
Myself and another coworker can run it without any problem and it asks us if we want to save the .txt file before it closes it and runs the batch file stripping off the .txt extension. We say yes and it executes as designed. Another coworker runs it and it looks like the files are appending then the window closes. Never prompts him if he wants to save and the file is nowhere to be found. From what I have researched all his excel settings match ours. We are all running the same OS (XP) and version of MS Office (2007). The part of the macro that seems to just be ignored is below:
[Code] .......
Then the following batch file runs stripping the .txt file extension:
FOR /R "T:Cash ManagementUnsecured\_Team - DisbursAUTOMATIONInput" %%f IN (*.txt) DO REN "%%f" *.
I have tired removing the ActiveWorkbook.Save command thinking it would default to prompt him to save it but it doesn't.
View 2 Replies
View Related
Jun 23, 2014
My company recently upgraded everyone to Microsoft 2010 from 2007 version. I have no substantial VBA skill and left with a VBA code which is supposed to extract a list of outlook emails sitting in a shared mailbox into Excel.
I was using that VBA code in Outlook 2007 and it worked fine but shows the following error when run in Outlook 2010: 'Run-time error '-2147221233 (8004010f)': The attempted operation failed. An object could not be found. Here is part of the code:
[Code] .....
It worked after one of the members suggested to "click on any line of this code and press F8 repeatedly until the yellow focus moves to the error line, don't press F8 anymore. Now in immediate window, copy paste each of below lines, press enter after each line. Let us know where the error occur." However, it stop working the next day.
? olNS.Folders("Mailbox - Market Intelligence").Folders.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Items.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Folders("MI").Items.Count
View 2 Replies
View Related
Jul 31, 2014
I am using office 2007 and here is the problem I am facing. I am using a formula and it is based on two columns data. The formula result is at C20:C2400, while the two data columns are at A20:A2400 and B20:B2400. I add one more row of data at A2401 and B2401, I expect the formula result would auto extend to C2401 but it doesn't, nothing happen.
I check that I need to turn on the auto extend check box in option, I check and it is already on.
View 3 Replies
View Related
Aug 29, 2006
Is there a way to scroll down the list of entries in a combobox using the mouse wheel instead of clicking on the box to scroll up and down?
View 2 Replies
View Related
May 7, 2014
I've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
View 1 Replies
View Related
Apr 18, 2009
I always used Office 2003 .. I just installed Office 2007 to try it out. But everything doesn't work in Excel 2007, which does work in Excel 2003.
I added an example of the list, but here are the codes:
Sheet1
View 2 Replies
View Related
Oct 22, 2008
I have a workbook with 8 sheets, one of which is the "main" sheet that holds all of my user data for logins at my job (I'm in IT). There are about 4300 users and 23 fields for each user, so there are 4300 rows in the sheet. Other sheets in the book are important, but not as much as this one.
The workbook has a total of over 1000 lines of VBA code right now, as I'm building a tool that finds users, adds users, modifies users, etc. (I know, Access would be smarter for this, but for some reason they want me to use an xls). Most of this code works with the sheet that I'm having the problem on.
This ONE sheet has seemed to disable the functionality of the scroll wheel, and I can't use Page Up or Page Down while in the sheet either. Also, if I select cells with VBA (Sheet2.Range(<range>).Select), it will select the cell, but it will not draw focus to that cell on screen (the sheet will not move at all). The other 7 sheets in the workbook have all regular functionality.
This just started happening a couple days ago, and I've been building the code for about a week, so I'm wondering if it's something in the code...?
Does anyone have any idea what might cause this?
View 14 Replies
View Related
Oct 10, 2011
I recently upgraded from Excel 2003 to 2007, and the worksheet change procedure that i have embedded in my worksheet no longer fires when the criteria are met. If and if I fix it to work in 2007, will it still work in 2003?
Here is my procedure:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngCell As Excel.Range
If Not Intersect(Target, Range("C19:R19")) Is Nothing Then
For Each rngCell In Intersect(Target, Range("C19:R19"))
If rngCell.Value = "BLACK" Then
MsgBox "Please select a shading style", , "Shading Style Required"
End If
Next rngCell
End If
End Sub
View 2 Replies
View Related
Mar 5, 2009
I just upgraded to Excel 2007 and my macro from Excel 2003 for inserting a picture doesn't work correctly in 2007. I have a command button that states insert picture and when you click it, it will let you insert a picture into the cell and hide the command button. In 2007 it will let you insert the picture, but it isn't centered and expands into other cells and the command button is still visible. The picture appears to be the correct size it just doesn't center itself in the cell and the command button is still visible. Below is the
View 3 Replies
View Related
Apr 25, 2014
i checked and checked and my IF function just gives me the wrong answer... attached is just a sample data..i have over 230 lines to check actually..
View 4 Replies
View Related
Mar 23, 2012
HTML Code:
If Left(Range("H18"), 7) = A23C567 Or Left(Range("H18"), 7) = A65C321 Then
ActiveSheet.Cells(6, 7).Value = "Business and Private Banking"
End If
Im trying top use the above bit of code and it does not work when the criteria is Text , so if I simply change the above to =1234567 it works fine -- But I need it to be alpha numeric
View 6 Replies
View Related
May 23, 2014
I am having issues with a min if formula, even though i enter it as an array (ctrl +shift+enter), it only returns a zero.
The formula is supposed to return the earliest date from Raw data if the name of the company matches the one from the data validation ('Company lookup'!D3).
Dates are in column D and company name in column M
I checked, the dates are all formatted as dates
=MIN(IF(RAW!$M:$M,'Company lookup'!D3,RAW!$D:$D))
View 3 Replies
View Related
Jan 31, 2014
I'm coping and pasting data (html) into a worksheet. When I try to format some of the columns as accounting$, number, ect. They won't format. It looks as if there are spaces before and after the data. So I tried the trim and clean function but it doesn't work, so I guess the blank "spaces" are not really spaces.
It gets better...
When I do the same exact copy and paste (as html) on another persons computer, they are able to format just fine, and the "spaces" are removed automatically.
Why is this working on one computer but not the other? Is it a setting that my computer has enabled or disabled? If so, what is it?
View 1 Replies
View Related
Mar 28, 2009
I have written a user-defined function that searches for a small range within a larger range. The function requires two input parameters: the range you are looking for, and the range you want to look within.
For example, I might look for the string of values in cells A1:D1 in a larger range E1:H20. The function returns the row number in the larger range where the smaller range is found.
My problem is this: The function is working fine when I call it from another sub procedure. However, when I try to run it as a worksheet function, I get a "#VALUE!" error. The function pops up in the "insert function" menu, and it prompts for the two input parameters.
View 6 Replies
View Related
Jul 31, 2013
i have a macro which i have created to send outlook notification email through excel 2010 when the excel file is saved. I would like to attach the same excel file as an attachment in the outlook email so that everyone in the mailing list can view the attachment. however the macro which i created does not work. i would like to know what is the problem with the macro below. there's an error which says "file path does not exist" when i try running the macro but i have verified my filename is correct & the drive i have saved the excel file is in Z: drive. My file name is 'Tracking File.xls'
'Save Workbook
ActiveWorkbook.Save
'Criteria to send Email
[Code].....
View 1 Replies
View Related
Oct 16, 2013
I am having difficulty with a Vlookup in Excel 2003. Basically I have converted both fields to Text using the text function =TEXT(A2,"0") and have tried matching the values but just get an #N/A error and I have also converted both back to number format but still get the #N/A error....when I do a "=" operator function it returns a FALSE value but I cannot see why as both cell are just 4 or 5 digit number.
View 3 Replies
View Related
May 24, 2014
First I made some contents and drew a border from Home > Font > all Borders on an Excel 2010 file. So it became like below image (capture1). After that I wanted to print it so went to File > Print to see its preview. But the problem is that the lines between tue and wed and also between mon and tue are not shown neither in preview nor when printing. The height of row 7 until 17 is 24 (that is 32 pixel) but heights of the rest of the rows are normal (20 pixel).
View 7 Replies
View Related
Feb 6, 2013
I have designed a pay voucher in excel 2007. In the Cell A5, I have a dropdown list (through data validation) of names. I want to scroll down the name and take a print of pay voucher. Let me, explain with an example. Cell A5 (having dropdown List of names)
JhonBillAdamMickNo name (balnk)No name (blank)No name (blank) I manually selected the Jhon and take the print of voucher. Now I want some codes which aquatically select the 'Bill' from dropdown list and take the print of voucher. Then it will select the 'Adam' from dropdown list and take the print of voucher . Then it will select the 'Mick' from dropdown list and take the print of voucher and so on till the last name of data validation list. Remember, I have some blanks in the end of drop down list. This macro should ignore those blanks.
View 2 Replies
View Related
Aug 19, 2013
I'm trying to make a range selection in a pivot table as per the snapshot below:
http:[url],....
The values I am trying to select are the ones that are both red and italic. (Mobile, Other Fix, Fix) from CBU_NA.
I've searched and found a way to select both the rows for CBU_NA category and also the column categ2.
However when I try to make an intersection out of the 2 ranges I receive an error. I'm using Excel 2010 on windows 7.Below the code I am using:
Code:
Sub FCST()
Dim r1, r2, r3 As Range
r1 = pt.PivotFields("categ2").DataRange.Select
Selection.Font.Italic = True[code]...
View 2 Replies
View Related
Dec 27, 2012
I'm using Excel 2007 and I have a reasonable level of experience with VBA coding in normal / object modules, but I have no experience with class modules or events ... so I do not have a good command on what goes into a normal module vice a class module if I want to use mouse events to rotate a chart.
I am looking to rotate a chart ... Since I am not allowed to post a file, I will give the 3D array here:
1.0000
2.0000
3.0000
4.0000
[Code]...
I have placed into a normal module the following code (based on what I was able to pick up from MSDN):
Code:
Dim myClassModule As New EventClassModule
Sub InitializeChart()
Set myClassModule.myChartClass = Worksheets(1).ChartObjects(1).Chart
End Sub
And I have placed the following code into a class module named EventClassModule (also based on what I was able to pick up from MSDN):
Code:
Public WithEvents myChartClass As Chart
I want to rotate the chart by using click and drag, and, if possible, I'd also like to be able to zoom in and out via some method (say a mouse wheel event).
In the following link, a guy has done a beautiful job of enabling scatter plot rotation using scroll bars, but I'd like to be able to use mouse events instead:
3d scatter plot for MS Excel (VBA macro)
View 2 Replies
View Related
May 15, 2008
I recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
View 3 Replies
View Related
Feb 8, 2014
I have my code here:
VB:
Sub openfiles()Dim Path As String
Dim ExcelFile As String
' Path = GetFolder("C:UsersKinteshDesktop")
Path = "C:UsersKinteshDesktopVBA programmingMaps"
ExcelFile = Dir(Path & "*.xls")
[Code] ....
NextCode:
GetFolder = sitem
Set fldr = Nothing
End Function
My problem is that the code all actually works (including the function and when I use the commented part), but pointing to this one specific directory (the one I'm using right now), literally nothing happens.
View 6 Replies
View Related
Nov 10, 2012
i am totally new in excel and i am using excel 2007, my question is : how can i create an object in an excel sheet, so that when the mouse cursor move to it, it pops up anohter image?
View 4 Replies
View Related
