Scroll With Wheel Mouse In ListBox?
Sep 16, 2012Scroll with Wheel Mouse in ListBox?
View 1 Replies
ADVERTISEMENT
Worksheet Listbox Causing Crash With Mouse Wheel Scroll
Aug 21, 2008I am having problems with an Excel workbook I am working on. I have a sheet that has a number of controls added to the top of it. Two of these controls are listboxes. My problem is, if I am in the listbox navigating through it, and I accidently move the Mouse Wheel, Excel crashes and I get the usual, "Send Error Report" form.
I have seen that there are other people having this problem and that there are a number of solutions out there but my problem is a bit different. I have a few forms with listboxes on them, and while mouse wheel scrolling doesn't work, it certainly doesn't crash Excel. It only seems to happen when I have a control permanently added to the sheet. Is there any event handler for mouse wheel scrolls or anyway to disable them through VB?
Mouse Scroll Wheel In VBA
Jul 29, 2005how to enable the mouse scroll wheel in VBA?
I'm talking about the little wheel in the middle of the two mouse buttons, the one that you can use to scroll up and down through documents etc.
How To Make Scroll Sideways With A Mouse Wheel
Jul 18, 2008How can i make my mouse wheel scroll an excel sheet sideways instead of up and down?
my sheets are only 5 rows big, but some 20 columns and its a pain to move around the sheet efficiently!
Mouse Wheel Scroll In A Combobox On Userform (Lots Of Code)
Sep 16, 2007I have seen some code around that allows scrolling in listboxes using the mousewheel. I have also seen some code here on the forums about scrolling through a combobox embedded in a workbook. I have tried adapting both of these to suit a combobox on a userform but I cannot get either to work.
Here is the code that I used for the embedded combobox; I added it to the base code for the userform
I then added the following code to a standard module as stated in the forum post;
In the first section of the code there is a msgbox that never gets shown so I don't think code is recognizing the mouse wheel at all.
The second set of code that I used was set up to work with a listbox and it works perfectly with a listbox control. The problem is I cannot adapt it to suit a combobox and if I use a breakpoint to see what is happening Excel freezes.
The following code is added to the userforms code;
Then in a standard module I added the following code;
I added this section of the code;
I think this should only work on a Combobox but a Combobox does not appear to support the TopIndex value. Is there a way this can be setup to work with a userform combobox?
Sorry about the huge amount of code.
Excel 2007 :: Mouse Wheel Scroll Function Doesn't Work
Feb 8, 2012I'm using Excel 2007. When I try to scroll with the mouse wheel, it doesn't do anything. If I hold down the control key and scroll with the mouse, it zooms in and out. So that works fine, but I can't do the basic scrolling up and down the document with the mouse wheel. There is no "Tools, Options" menu in 2007 so I don't even know where to find this type of option. The options available from the Office button are completely different.
View 4 Replies View RelatedComboBox Scrolling With Mouse Wheel
Aug 29, 2006Is there a way to scroll down the list of entries in a combobox using the mouse wheel instead of clicking on the box to scroll up and down?
View 2 Replies View RelatedWorksheet Scrolling With Scroll Wheel Is Broken
Oct 22, 2008I have a workbook with 8 sheets, one of which is the "main" sheet that holds all of my user data for logins at my job (I'm in IT). There are about 4300 users and 23 fields for each user, so there are 4300 rows in the sheet. Other sheets in the book are important, but not as much as this one.
The workbook has a total of over 1000 lines of VBA code right now, as I'm building a tool that finds users, adds users, modifies users, etc. (I know, Access would be smarter for this, but for some reason they want me to use an xls). Most of this code works with the sheet that I'm having the problem on.
This ONE sheet has seemed to disable the functionality of the scroll wheel, and I can't use Page Up or Page Down while in the sheet either. Also, if I select cells with VBA (Sheet2.Range(<range>).Select), it will select the cell, but it will not draw focus to that cell on screen (the sheet will not move at all). The other 7 sheets in the workbook have all regular functionality.
This just started happening a couple days ago, and I've been building the code for about a week, so I'm wondering if it's something in the code...?
Does anyone have any idea what might cause this?
Excel 2013 :: Disable Ctrl+Mouse Wheel?
Apr 8, 2014Is there any method to disable Ctrl + mouse wheel function in excel 2013, actually I want to disable zoom in and out functionality but don't want to disable normal scrolling.
View 2 Replies View RelatedMouse Scroll Not Available After Pressing F2
May 15, 2008I recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
Mouse Scroll WITHIN A Data Validation List & Option Macro Assistance
Jan 7, 2010I'm trying to do a few things actually. I am somewhat a newb at programming, although I do understand how C++ and the coding works within Excel. To me, it's like the English language...knowing all of the vocabulary and formatting it right is important. If I don't know the vocabulary, I don't know what options I have.
This tool is being used in the call center I work in. It is to help eliminate repititious information used to notate accounts. I have attached a picture of what the tool looks like so you can have a better idea of what I'm working with. Here are a list of things I'm trying to do which I have searched and not found answers to:
1. I am trying to use a middle mouse scroll to scroll through validation list. This list information is located on a different locked tab. Basically, I have a few rows where a drop down selection can be made and it would be easier to scroll rather than manually moving the slider within the validation list.
2. As you can see, this "tool" an employee and I have created has many buttons. What I would like to do is to be able to click a button on the right and have it "stack" text within a single cell. In other words, if I click the button once, the text may be entered into the "actions taken" cell. If I click another button, I can have the option (or maybe a little "+" next to the button) to add this button's information to the end of the information already entered within the "actions taken" box. I've tried recording and using the keyboard and selecting "end" and then having the text added, but it didn't work. I've seen "loop" VBA code, but I don't want something to repeat, I want it to stack in the cell when clicked manually.
I'm sure there is a way to make the tool much better using VBA code and not use Excel, but I don't have an extensive knowledge of Excel to do something like that. I'm a very fast learner and understand how the coding works, so if you have an idea which may help, and you understand what I'm trying to do here, please provide your .02.
Basically, it's used so the Customer's name and phone number are entered manually, and then just about everything else is automated by the use of the buttons on the right. If I could get the 2 above options to work, it'd be perfect. I just figured out I could eliminate screen flicker and hide the macros working by using:
Disable Middle-mouse-click Scroll On Inherited Excel File
May 7, 2014I've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
Limit Scroll Area - Code Activates Only On Mouse Or Keyboard Input
Apr 21, 2007I have a worksheet that serves as a navigation page for the workbook and use the following code to restrict from scrolling off the viewable content. The problem is that the code doesn't kick in until either a click if the mouse or keyboard input. This initially leaves the worksheet open for scrolling until input is received.
How do I make this code activate when the wb is loaded? Code in the Thisworkbook module already makes the menu the visible sheet, and code limiting the scroll area is in the sheet module.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
With ActiveSheet
.ScrollArea = "A1:L11"
End With
Range("A1").Activate
End Sub
I've also tried using "Range("A1").Select", but it doesn't work either. How can I get this to work correctly?
Mouse Hover In A ListBox
May 19, 2009I have a Listbox with multiple items (Multiselect property is on). However, due to the length of the items not all the parts of it is visible within the listbox.
Is there a way by which if a user hovers the mouse over an item in the ListBox (or selects an item), the whole item is visible (the way it is done in ControlTipText)
Listbox Pop Up Menu On Mouse Right Click
Feb 12, 2007I have a list box with items. When I stay on item and press mouse right click, I want see pop up menu with "remove this item" and "add new item".
View 8 Replies View RelatedGetting Horizontal Scroll Bar In Listbox?
Mar 3, 2006get a horizontal scroll bar into a listbox ?
My litbox is 180 point wide (set by width command) but my text is wider.
I seem to remember if you set a small width in the .columnwidths property you can generate a scroll bar - but this is ignored for a single column listbox, which is what I have.
If I reset the .Width property to something very small (eg 50) then I get the scroll bar but for some reason it doesn't scroll the fullwidth of the text.
Controlling Scroll From One Listbox To Another
Nov 18, 2013I have 2 list boxes and want to controll scrool range (View) depending of selection of List Box 2.
Here is my code.
Private Sub UserForm_Initialize()
'ListBox1
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
Dim arr
Dim I As Long
Set rngSource = Worksheets("Material").Range("F4:K3000")
[Code] ..........
Selection Of Rows In A Listbox From Program, Not With The Mouse
Jun 24, 2006I have two files and I need to compare them. The two files will be store in a listbox an I have to make the lines that are different with another color or select them so it will be easy to see the diferences. It is for one project that have to be ready tomorrow
View 8 Replies View RelatedMouse Click Selects Wrong Listbox Item
Oct 2, 2013A list box selection works fine on my computer but on a friends Windows Vista PC the following happens:
Selecting items near the top of the list works fine. 1/4 of way down a mouse click on an item selects the Next item.
1/2 of the way down in the list, the mouse click on an item selects the one 2 or 3 further down, etc., etc.
Excel 2010 :: How To Remove Horizontal Scroll Bar From Listbox
Feb 10, 2012Using Excel 10, Win 7, a User Form with list box control, I only need one column about 7 characters long. (At this point my horizontal scroll bar is taking up more room than the list box window so I'd really like to lose it). I don't see any property options for scroll bars to set.
View 2 Replies View RelatedRestricted Scroll Areas Won't Scroll
Nov 26, 2007I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)
View 2 Replies View RelatedRoulette Wheel Sequencing
Jun 1, 2014I do not have any information about exel but there is an urgent need to program.The numbers on a roulette wheel automatically want to calculate the distance between. There are 37 numbers on the roulette wheel and Sequences matter of form
0 26 3 35 12 28 7 29 18 22 9 31 14 20 1 33 16 24 5 10 23 8 30 11 36 13 27 6 34 17 25 2 21 4 19 15 32 0
[code]....
Control Scroll Bars: Remove The Scroll Bars From Just One Worksheet But When Unticked
Jan 13, 2007In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies View RelatedCreating Range Of Listbox Based On Selection Made In Another ListBox
May 1, 2014I have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
How To Populate Listbox With List Excluding Values Found In Another Listbox
May 27, 2014I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
Create Two Column Listbox That Will Transfer Both Columns To Listbox?
Apr 4, 2014im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedMove Listbox Line To Another Listbox With A Command Button
Mar 31, 2007I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
Select Listbox Entry Based On Another Listbox?
Mar 18, 2014I have 2 userforms. UF1 and UF2. UF2 has a rowsource set to its Listbox. UF1 has a search function that searches the original sheet. Now I want to double click on an entry in UF1's Listbox and select the same entry in UF2's Listbox. I want to then work with that entry in UF2.
[Code].....
I do all of this to circumvent Excels restriction. I can't search in a rowsource Listbox, but any edits done to my new Listbox wouldn't be made to the Excel sheet.
Populate 2nd Listbox With 1st Listbox Selection
Sep 27, 2007I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
Setting Listbox Value Doesn't Set Listbox Value
Apr 8, 2007The following line highlights the first selection in the listbox visible and calls the listbox click event
myListbox.Selected(0) = True
myVal = myListbox.Value 'after this line executes, instead of being set to the actual first value in myListbox, myVal is ""
Why is myVal not set to the first selection in the listbox? After I execute the following code, myListbox.Value still equals "" and not "Counter 1".
myListbox.Value = "Counter 1"
Why can I not set myListbox.Value?