Mouse Scroll Wheel In VBA
Jul 29, 2005how to enable the mouse scroll wheel in VBA?
I'm talking about the little wheel in the middle of the two mouse buttons, the one that you can use to scroll up and down through documents etc.
ADVERTISEMENT
Scroll With Wheel Mouse In ListBox?
Sep 16, 2012Scroll with Wheel Mouse in ListBox?
View 1 Replies View RelatedHow To Make Scroll Sideways With A Mouse Wheel
Jul 18, 2008How can i make my mouse wheel scroll an excel sheet sideways instead of up and down?
my sheets are only 5 rows big, but some 20 columns and its a pain to move around the sheet efficiently!
Mouse Wheel Scroll In A Combobox On Userform (Lots Of Code)
Sep 16, 2007I have seen some code around that allows scrolling in listboxes using the mousewheel. I have also seen some code here on the forums about scrolling through a combobox embedded in a workbook. I have tried adapting both of these to suit a combobox on a userform but I cannot get either to work.
Here is the code that I used for the embedded combobox; I added it to the base code for the userform
I then added the following code to a standard module as stated in the forum post;
In the first section of the code there is a msgbox that never gets shown so I don't think code is recognizing the mouse wheel at all.
The second set of code that I used was set up to work with a listbox and it works perfectly with a listbox control. The problem is I cannot adapt it to suit a combobox and if I use a breakpoint to see what is happening Excel freezes.
The following code is added to the userforms code;
Then in a standard module I added the following code;
I added this section of the code;
I think this should only work on a Combobox but a Combobox does not appear to support the TopIndex value. Is there a way this can be setup to work with a userform combobox?
Sorry about the huge amount of code.
Worksheet Listbox Causing Crash With Mouse Wheel Scroll
Aug 21, 2008I am having problems with an Excel workbook I am working on. I have a sheet that has a number of controls added to the top of it. Two of these controls are listboxes. My problem is, if I am in the listbox navigating through it, and I accidently move the Mouse Wheel, Excel crashes and I get the usual, "Send Error Report" form.
I have seen that there are other people having this problem and that there are a number of solutions out there but my problem is a bit different. I have a few forms with listboxes on them, and while mouse wheel scrolling doesn't work, it certainly doesn't crash Excel. It only seems to happen when I have a control permanently added to the sheet. Is there any event handler for mouse wheel scrolls or anyway to disable them through VB?
Excel 2007 :: Mouse Wheel Scroll Function Doesn't Work
Feb 8, 2012I'm using Excel 2007. When I try to scroll with the mouse wheel, it doesn't do anything. If I hold down the control key and scroll with the mouse, it zooms in and out. So that works fine, but I can't do the basic scrolling up and down the document with the mouse wheel. There is no "Tools, Options" menu in 2007 so I don't even know where to find this type of option. The options available from the Office button are completely different.
View 4 Replies View RelatedComboBox Scrolling With Mouse Wheel
Aug 29, 2006Is there a way to scroll down the list of entries in a combobox using the mouse wheel instead of clicking on the box to scroll up and down?
View 2 Replies View RelatedWorksheet Scrolling With Scroll Wheel Is Broken
Oct 22, 2008I have a workbook with 8 sheets, one of which is the "main" sheet that holds all of my user data for logins at my job (I'm in IT). There are about 4300 users and 23 fields for each user, so there are 4300 rows in the sheet. Other sheets in the book are important, but not as much as this one.
The workbook has a total of over 1000 lines of VBA code right now, as I'm building a tool that finds users, adds users, modifies users, etc. (I know, Access would be smarter for this, but for some reason they want me to use an xls). Most of this code works with the sheet that I'm having the problem on.
This ONE sheet has seemed to disable the functionality of the scroll wheel, and I can't use Page Up or Page Down while in the sheet either. Also, if I select cells with VBA (Sheet2.Range(<range>).Select), it will select the cell, but it will not draw focus to that cell on screen (the sheet will not move at all). The other 7 sheets in the workbook have all regular functionality.
This just started happening a couple days ago, and I've been building the code for about a week, so I'm wondering if it's something in the code...?
Does anyone have any idea what might cause this?
Excel 2013 :: Disable Ctrl+Mouse Wheel?
Apr 8, 2014Is there any method to disable Ctrl + mouse wheel function in excel 2013, actually I want to disable zoom in and out functionality but don't want to disable normal scrolling.
View 2 Replies View RelatedMouse Scroll Not Available After Pressing F2
May 15, 2008I recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
Mouse Scroll WITHIN A Data Validation List & Option Macro Assistance
Jan 7, 2010I'm trying to do a few things actually. I am somewhat a newb at programming, although I do understand how C++ and the coding works within Excel. To me, it's like the English language...knowing all of the vocabulary and formatting it right is important. If I don't know the vocabulary, I don't know what options I have.
This tool is being used in the call center I work in. It is to help eliminate repititious information used to notate accounts. I have attached a picture of what the tool looks like so you can have a better idea of what I'm working with. Here are a list of things I'm trying to do which I have searched and not found answers to:
1. I am trying to use a middle mouse scroll to scroll through validation list. This list information is located on a different locked tab. Basically, I have a few rows where a drop down selection can be made and it would be easier to scroll rather than manually moving the slider within the validation list.
2. As you can see, this "tool" an employee and I have created has many buttons. What I would like to do is to be able to click a button on the right and have it "stack" text within a single cell. In other words, if I click the button once, the text may be entered into the "actions taken" cell. If I click another button, I can have the option (or maybe a little "+" next to the button) to add this button's information to the end of the information already entered within the "actions taken" box. I've tried recording and using the keyboard and selecting "end" and then having the text added, but it didn't work. I've seen "loop" VBA code, but I don't want something to repeat, I want it to stack in the cell when clicked manually.
I'm sure there is a way to make the tool much better using VBA code and not use Excel, but I don't have an extensive knowledge of Excel to do something like that. I'm a very fast learner and understand how the coding works, so if you have an idea which may help, and you understand what I'm trying to do here, please provide your .02.
Basically, it's used so the Customer's name and phone number are entered manually, and then just about everything else is automated by the use of the buttons on the right. If I could get the 2 above options to work, it'd be perfect. I just figured out I could eliminate screen flicker and hide the macros working by using:
Disable Middle-mouse-click Scroll On Inherited Excel File
May 7, 2014I've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
Limit Scroll Area - Code Activates Only On Mouse Or Keyboard Input
Apr 21, 2007I have a worksheet that serves as a navigation page for the workbook and use the following code to restrict from scrolling off the viewable content. The problem is that the code doesn't kick in until either a click if the mouse or keyboard input. This initially leaves the worksheet open for scrolling until input is received.
How do I make this code activate when the wb is loaded? Code in the Thisworkbook module already makes the menu the visible sheet, and code limiting the scroll area is in the sheet module.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
With ActiveSheet
.ScrollArea = "A1:L11"
End With
Range("A1").Activate
End Sub
I've also tried using "Range("A1").Select", but it doesn't work either. How can I get this to work correctly?
Restricted Scroll Areas Won't Scroll
Nov 26, 2007I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)
View 2 Replies View RelatedRoulette Wheel Sequencing
Jun 1, 2014I do not have any information about exel but there is an urgent need to program.The numbers on a roulette wheel automatically want to calculate the distance between. There are 37 numbers on the roulette wheel and Sequences matter of form
0 26 3 35 12 28 7 29 18 22 9 31 14 20 1 33 16 24 5 10 23 8 30 11 36 13 27 6 34 17 25 2 21 4 19 15 32 0
[code]....
Control Scroll Bars: Remove The Scroll Bars From Just One Worksheet But When Unticked
Jan 13, 2007In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies View RelatedPicture On Mouse Over
Jan 26, 2009Is there a way to have a picture set to a cell so when you put your mouse on it it will popup like the comments do.
View 2 Replies View RelatedPop Up Message On Mouse Over?
Jan 20, 2012I have a shape with a macro assigned to hide certain columns when clicked. I want to have a box pop up when you hover this button which explains what clicking the button will do.
I know the VBA code is called MouseMove but I am new to VBA and don't know where to even start.
MOUSE OVER PREVIEW
Apr 11, 2007I have a data base of hundreds of drawings all linked in Excel. In excel I just clik on the Hyperlinked file and it opens up in my cad program.
With so many files, in order to see exactly what I am opening I have to open it. This is just if the description is not clear.
Can I create a mouse over preview that would pop up a linked picture file or a jpg in an assigned box or free floating.
so when the user puts their mouse over the hyperlink number, without clicking it, a preview picture of the item will pop up right in the excel sheet.
Pop-up Graph On Mouse Over
May 24, 2007is it posable to get a graph to popup when the mouse is draded over a certen cell? or maybe to get it to popup in the comments bubble. if that is possible. then is it possible to set pramators that if its above 350 it turns red( on a line graph) and if its below its turns black. this was throwen at my about 20 min ago.
View 8 Replies View RelatedDisable Mouse
Jun 27, 2007Is it possible prevent the use mouse (disable mouse) while a macro is running? I made a program which starts with animation of Shapes. If you click on shape while macro is running it stops animation.
View 7 Replies View RelatedMouse Over In Other Non VBA Application
Mar 15, 2008Is it possible to get mouseover information from outside of Excel using VBA? I'm trying to automate a non-microsoft package but I need my mouseclicks to wait for a message to appear within the other application before my macro continues. I've already asked something similar before but I've put a better title on this thread so apologies for the repeat.
View 2 Replies View RelatedNo Right Mouse Click
Apr 22, 2008I use Excel XP 2002. I now can't copy /paste by using the right mouse button. It works perfectly in other MS products, on the net and on the desktop. l have checked my Tools/Options with other users, I have uninstalled, rebooted and reinstalled the complete Excel package but the problem persists, even from start with a blank worksheet. I have also checked and there are no add-on ticked.
View 5 Replies View RelatedVBA To Record Mouse Movement?
Apr 1, 2014Is there a way to record the mouse movements within VBA. I essentially want to use excel to open an external program and execute specific commands within that program. Unfortunaetly the extrenal program is not a micorsoft program
View 1 Replies View RelatedMouse Relocation To ActiveCell
Nov 20, 2009I've got an application where I switch between workSheets and the mouse stays in the same location. As all of my actions are predicated on mouse right-clicks or double-clicks, the first thing that I have to do as move the mouse back to the active cell. Is there a way to reposition the mouse to the activeCell upon returning to the workSheet?
View 6 Replies View RelatedRun Mouse Right Click Macro From Add-In
Feb 5, 2010I have a large project that I've been able to move all code from the workbook to an Add-In (except code that's sheet related).
I have one module that refuses to run from the Add-In. In this code
VBA / Cell Under Mouse Pointer?
Sep 5, 2010how to get address of cell, which mouse cursor indicate to or simulate mouse left button press in VBA ?
View 2 Replies View RelatedWhile Mouse Cursor On Top Of A1 Cell
Sep 30, 2006I would like to change A1 cell's Interior.ColorIndex to red color and A1's font format to Italic, while mouse cursor on top of A1 cell.
Can i do it with a VBA code or any different way to do it?
For example:
Sub CursorOnA1()
If MouseCursor OnTopOf [A1] Then
With [A1]
.Interior.ColorIndex = 3
.Font.Italic = True
End If
End If
End Sub
Paste Values To Right Mouse
Jul 15, 2008I constantly need to copy and paste values from one sheet to another.
I know that there have been macros on this site that can be assigned to a key combination but can anyone provide a way of having this option available on the right mouse button.
Adding To Right Mouse Menu
Jan 4, 2009I want to add autosum to the right mouse button. I found a link on another thread in this forum to [url]
but I'm not sure what to do with it.
Where and how do I add the code?