Excel 2010 :: Building Text File Based On Values Of Cell?
Feb 26, 2014
I'm trying to use Excel to build a text file based on values from certain cells in Excel 2010. This is based partially off of static text that never changes and variables that will need to change. For example, I want Excel to output a text file that has the following text: The red fox jumped over the $X twice. I would want $X to be replaced by the value of A1 of the active worksheet. I will also have several lines like that, so it won't just be a single line, but anywhere from 20 - 120.
View 1 Replies
ADVERTISEMENT
Jan 15, 2013
I'm working on a macro that does the following:
1. Pull data from the internet
2. Perform calculations on the data
3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values.
- It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts
- I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area
- It works perfectly fine when I step through using F8
- I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait
- Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code:
'Chart variables
Sheets("Summary").Select
Dim ChartRange As Range
[Code]....
View 4 Replies
View Related
May 14, 2014
I'd like my macro (in an Excel 2010 workbook) to copy values from three worksheet cells and append them to an existing Access or SQL database file -- without having to leave my Excel spreadsheet or open any other programs. The database file simply needs to be appended. Keeping a running list. That file isn't being used for anything else, we can set it up however is necessary to do this.
For example, Excel cells A1, A2, and A3. Representing Job Name, Job Number and Job Total.
how make VBA do this(in SIMPLE terms)? Or give me a link of where to look or what to search for? I understand VBA but not Access or SQL.
View 1 Replies
View Related
Jun 4, 2013
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
View 1 Replies
View Related
May 16, 2014
Using Excel 2010
As I am looping through files in a folder, I would like to determine if the file is a text file.
The problem is that all extensions are variable in a pattern such as .078, .051, etc.
In this instance, the extensions are numeric, but I'm trying to figure out a way to handle that is all encompassing to include *.txt, *.tsv, *.csv, *.prn, etc......
How can I handle these efficiently?
View 6 Replies
View Related
Apr 27, 2012
I am using Excel 2010 and I want to import data from a text file, but the problem is that the data is more than 1048576 rows of excel. Is there any solution though codes if one sheet fills up and import remaining data to other sheets ?
View 2 Replies
View Related
Jul 12, 2012
I need to import thousand of txt files into 1 worksheet keeping the file names as data. Each txt file has 2 columns :
1 0.65914
2 0.65945
3 0.86062
... ...
and each txt file represents recordings made at specific time and date (e.g 0158.DSG_RAWD_HMS_21_ 0_ 0__DMY_29_ 2_12_pulses). I would like to have 2 columns: 1) with the time taken from the name of the txt file (e.g. 21:00:00) and 2) the associated recording. Something like this:
21:00:00 0.65914
21:00:00 0.65945
21:00:00 0.86062
and so on for each txt file and all the recordings piling up in 1 spreadsheet. I have tried to run few codes in VBA, but I have no knowledge of it and none of the code worked. I am using Excel 2010.
View 1 Replies
View Related
Jan 30, 2013
code to import a tab delimited text file with about 3 million rows so that it creates a new tab every time it hits the 1 million row limit?
View 3 Replies
View Related
Apr 22, 2013
Is there a way to open a text file from Excel 2010 and specify that I want it in .xls format?
I am working in compatibility mode, and expected that when I opened a text file from code within an xls file, the text file would have 65,536 rows, but it has 1,048,576. This causes a problem when we try to copy the sheet with the data from the text file, and insert the sheet into our xls workbook. See code below. The error is: Run-time error '1004': Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook..
I know I can get the data other ways (such as copying and pasting only the cells containing data) but I was hoping to make minimal changes to the code below as I will have to make it across several templates. Specifically, I was hoping that there was a qualifier I could add to the Workbooks.OpenText statement after "Tab:=True" - Perhaps something about opening the text file in File Format 56. However I have not been able to find out how to do that.
Code:
.....FileToOpen = Application.GetOpenFilename("All Files (*.*),*.*,GeoTAC Files (*.ctf),*.ctf, _
Text Files (*.txt),*.txt,Excel Files (*.xls),*.xls", 1, , , False)
Workbooks.OpenText Filename:=FileToOpen, _
[Code].....
View 3 Replies
View Related
Jan 11, 2014
I have a text file which is attached as "rawdata". It contains records of something (let's call it temperature) at different times on different days. My goal is to display a graph of temperature versus time so that I can visually analyze trends. I have hundreds of these files, all of different lengths. it is very important that I automate this process as much as possible.
Detail: (Here I describe what I have done so far; if this is inefficient or unnecessary, feel free to tell me) I open Excel 2010, click File, Open, and select the file that I want to parse. It is a TXT file, so the Text Import Wizard comes up. For step one, I select Fixed Width. I select File Origin: MS-DOS (PC-8). On step 2 of the wizard, I create column break lines to place all dates in the far left column. The next column contains the first column of numbers before the first dash (-). The next column contains only the dash - I will later select "ignore this column" to eliminate them. The next column contains the time stamps. I continue adding column breaks in the wizard until all of the data are parsed into columns in the same manner.
In step 3, I format the first column as "date (DMY)". The columns with the dashes I select "do not import". Everything else is "general". I click "finish", and the resultant workbook is attached, called "import".
Now, as to what I want to do: I want to display the "temperatures" as a graph vs a date/time axis. The reason I find this difficult is because the temperatures and times are not in neat columns, but are in 4 columns that go in a left-to-right and top-to-bottom progression and are broken up every few lines. (I am interested only in numbers that are displayed immediately to the left of a time-stamp. Therefore, the "record #"s should be ignored. We can delete the rows that say "record #" if can be done automatically.)
View 3 Replies
View Related
Mar 5, 2012
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
View 1 Replies
View Related
Jun 18, 2014
I am trying to create a Macro/VB code that will build 4 lists based on a list (see attached example).
I have a list of applications and the numbers of users having them installed on their computers, these applications are marked using a RAG status (Red, Amber, Green & NBR No Business Requirement) on a seperate work sheet i want to split them by these RAG statuses, the status of applications changes as they are packaged for SCCM, so the RAG status will be changed, so i want the code to be able to rebuild the lists at any time to obtain an accurate view of the numbers at each status.
View 6 Replies
View Related
Apr 30, 2009
I am using Windows XP and Office 2003.
I am looking to automate a process where information is sent to someone in a text format and they in turn transfer that data to an excel file. It basically looks like this (but includes a lot more info):
Service Request #: 123456
Instrument Type: New Instrument
Lot/Serial #: 123456
SR Type: Product Complaint
Service Coverage: Maintenance Agreement
The info on the left (text preceding the colon) is always the same but the values following the colon can change. The excel file has all of the text before the colon and they just enter the information into the cells. I am looking to make it so that an Excel macro (or maybe a word/outlook macro) automatically scans the text document and sends this info to the exact same cells in excel every time.
The text file is actually a message from an Oracle database and I am not going to be able to make any changes to the way the data comes in.
View 9 Replies
View Related
Jun 4, 2012
I have a spreadsheet (Excel 2010). I want to fill categoryid in Sheet One based on values of Skill and State which are part of field in Sheet two.
Sheet One (Has Four Columns and I am looking for filling CategoryID based on Sheet Two
FirstName LastName Skill State CategoryID
John Edward Ballet California
Ed Catalino Tap London
Natasha Curtis Ballet Australia
Shen Watson Modern Kansas
Sheet Two
CategoryID CategoryDescription
1 Dancers/Ballet/United States/Alaska
2 Dancers/Ballet/United States/California
3 Dancers/Ballet/UnitedKingdom/Wales
4 Dancers/Ballet/UnitedKingdom/London
5 Dancers/Tap/United States/Alaska
6 Dancers/Tap/United States/California
7 Dancers/Tap/United Kingdom/Wales
8 Dancers/Tap/United Kingdom/London
9 Dancers/Ballet/Australia
10 Dancers/Modern/United States/Kansas
View 5 Replies
View Related
Mar 14, 2013
I want to calculate the most common text value for groups. I have a table with a lot of records like an example below.
ID Code
1 HB
1 KU
1 KS
1 LV
1 KS
2 LM
2 KS
[Code]....
I want a table like below:
ID Code
1 KU
2 KS
3 KS
How can I do it in Excel 2010?
View 9 Replies
View Related
Jul 22, 2014
I have an excel file with 2 sheets. Sheet 1 has a column that contains formulas (ie (18299*11151)/20067 ) Those numbers are IDs referencing questions stored in Sheet 2. What I would like to do is find a way to look up those questions and place them into the formula instead of the ID numbers.
View 6 Replies
View Related
May 9, 2014
I need to highlight a column in a pivot based on the 3 rules below.
Highlight cell in column A if:
Cell in Column A contains numbers 4, 5, 6. or 6.5.
Cell in Column D contains a value
Cell in Column E contains a value
An example of how it should look (Excel 2010): MrExcelhelp1.xlsx
Formula to put in conditional formatting?
View 4 Replies
View Related
Feb 11, 2013
I'm on excel 2010 and I have a small group excel files I open everyday. Most of the files are static in name and location. I've got a macro created to open those files, which works fine with workbooks.open and the file path.
There are two report files I want to incorporate into my macro of workbooks to open. The files are created weekly and the files names have the following format: "Report Name (YYYY-MM-DD).xlsm". I don't want to use the file's last modified date because older files may get edited after the more recent ones are created. The files are also not always created on the same day, so the solution needs to be flexible enough to not refer to a specific day of the week or anything.
Macro open an excel file based on the latest date found in filename.
View 9 Replies
View Related
Jun 19, 2014
Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.
Here is the set up:
Column AColumn BColumn C
(Side)(Qty)(Price)
Buy5,51215.67
Sell119,428null
Buy24,20945.77
Sell20,05412.25
...
I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))
The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.
View 5 Replies
View Related
Sep 10, 2013
I have a database of names in one column in excel 2010 and over time I have coloured the text of some of the names green to show that they have been added to a new online database. I want to be able to count how many of the names have been coloured so I can see if it matches with the total number already added on to the online database. I have over 800 entries so I don't want to have to manually count them unless I find I have missed any. Conditional Formatting is greyed out (it is a Shared document so that might be why).
in creating an IF (text is a certain colour) THEN 1, 0 or any others ways I can find the total in that colour. I only have two text colours in my spread sheet, black and light green.
Example of Table.JPG
View 1 Replies
View Related
Apr 6, 2014
I have a checkbox where the values are reflected as True/False in a seperate column, what i simply want to do is take the value from one cell, and add 10% of the value each time a value becomes True.
For example in this value column after the check box has been filled out it might look like this:
False
True
True
True
False
False
False
The cell then needs to take the figure, lets say, 100, add 10%, then add 10% to 110, then again and so on for however many "True" statements are in the column.
I have tried with no success with various SUM/SUMIF/COUNT/COUNTIF/IF etc cant seem to get it to work, im not sure the cell refreshes correctly after the checkbox is filled out and its not registering the new "True" value as by default its all set to "False".
View 7 Replies
View Related
Jun 17, 2014
I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
View 5 Replies
View Related
Mar 14, 2012
I'm trying to create a excel sheet which will automatically return a price based on a given width and drop value. Currently, I calculate the price manually by looking in a price book which has plenty of rows and columns and prices. I want to simplify this by simply entering the dimensions so it automatically calculates price based on the dimensions entered.
Below is the start of my worksheet. If I choose the exact sizes shown on the table, it will return a price, however if I choose a size that is not listed, I get an #N/A. Eg. If I choose 780 x 1500, it will return the price $179, but if I choose for instance 775 x 1490, it only returns #N/A, when I want it to still return the price $179.
My formula in K3 is
=IF(AND($I$3>0,$J$3>0),INDEX($A$3:$F$8,MATCh(J3,$A$3:$A$8,0),MATCH(I3,$A$3:$F$3,0)))
Sheet1ABCDEFGHIJK12ItemWidthHeightPrice
3mm6307809301080123019751821#N/A
49001581681791891992512001621741851952083615001661791912032167
18001701851972102228210017418920321623192400179193208224239102700
18520121823324911Excel 2010Worksheet FormulasCellFormulaK3=IF(AND($I$3>0,$J$3>0),INDEX($A$3:$F$8,MATCH(J3,$A$3:$A$8,0),MATCH(I3,$A$3:$F$3,0)))
View 4 Replies
View Related
Apr 23, 2013
Excel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
View 2 Replies
View Related
Mar 7, 2012
I have a text box that is set to "=B1". B1 is a cell from an Access table import with memo format. The text memo is long, probably on average between 1000-2000 characters. I have set up the text box to automatically resize for the text, but the text stops at what I assume is 255 characters, even though cell B1 displays the entire memo.
How can I set it up so that this text box (or any other similar shape) displays the text and retains its resize/wrap property?
This is done in Excel 2010.
View 1 Replies
View Related
Mar 14, 2012
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
View 3 Replies
View Related
Jun 24, 2012
I recorded a macro to save my file as PDF and assigned the macro to a button. Easy. Now I would like to change my macro to pause when the file is saving to allow the user to enter a file name. If that is not possible, I'd like to reference a cell to use as the file name. I have gone through other posts and tried changing my macro, but always get an error. I am using Excel 2010. Following is my code for saving to pdf.
Sub SavePDF()
'
' SavePDF Macro
'
[Code]....
View 9 Replies
View Related
Feb 21, 2014
I need to set up an automated process to open an existing .xls file, extract the data from specific cells located in that file and insert it into a totally different file that I have preformatted to accept this data.
Example scenario:
If I have "that_file.xls" and it is unopened, but it contains data in cells "A2 thru F2" that I need to extract... then I have "this_file.xls" , which is open, and set up with all my calculation cells and a specific layout (lets say it has cells "D8, E9, F10, G11, H12, and I13"). I want to be able to add a button to "this_file.xls" to run a macro that would open a file search window where I can select "that_file.xls", and then it will automatically extract the data from "that_file.xls" into "this_file.xls" as follows:
A2 to D8
B2 to E9
C2 to F10
D2 to G11
E2 to H12
F2 to I13
View 4 Replies
View Related
Apr 12, 2013
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
View 3 Replies
View Related
May 29, 2014
Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
View 2 Replies
View Related
