Excel 2010 :: Convert Eaches To Case And Cases To Eaches

Nov 8, 2012

I'm using excel 2010, WindowsXP.

I'm trying to create a table which coverts eaches to cases and cases to eaches depending which value is entered.

For example, if the warehouse associate fills in the EACH column, with 24, the CASE column will show 2 (using 12ea/case). If instead the warehouse associate fills in 2 in the CASE column, the EACH column will show 24. The idea is that the associate can fill in either value and it will convert. The problem is that I'm getting a circular reference error.

A1
B1

EACH
CASE

24
2

=B1*12
=A1/2

View 7 Replies


ADVERTISEMENT

Excel 2010 :: VLOOKUP Is Acting Case Sensitive

Mar 2, 2012

I am using the this formula to look up data using 0 to show not found. VLOOKUP is acting case sensitive. The Master Array data is in caps and the input is in lower case. There are no spurious spaces. Here are the results:

Code Name
0 River Branch Foundation = not found
X RIVER BRANCH FOUNDATION = found - in array as caps

The formula:
=IF(ISNA(VLOOKUP(B2,'[Master Array - 2012.xlsx]Master Array'!$A$2:$B$3053,2,FALSE)),0,VLOOKUP(B2,'[Master Array - 2012.xlsx]Master Array'!$A$2:$B$3054,2,FALSE))

View 4 Replies View Related

Excel 2010 :: Change To Lower Case And Manually Align To Left

Sep 4, 2013

I'm using Excel 2010. When I type 'true' or 'false' in any cell, Excel automatically changes to CAPITAL and Align Centre. I have to use the function 'lower' to change to lower case and manually to align to the left.

How to change the default setting.

View 1 Replies View Related

Excel 2010 :: Convert To PDF

Feb 16, 2012

I have just upgraded Excel from 2003 to 2010 and cannot locate where I would convert a spreadsheet to a .pdf document.

View 2 Replies View Related

Excel 2010 :: Convert :00 Into 0:00 Time?

Jan 9, 2014

I have imports with several values listed as :00. I am unable to adjust the import or export to make these values 0:00 as they should for calculating. How can I convert the :00 values to 0:00? Its literally just like I need to add a 0 zero in front of the colon ":". This is the case with anything imported that is less than 1:00 minute. I have :55 that should be 0:55 and so on. I have tried re-formatting for different time values, tried various formulas that were listed in the forums.

View 4 Replies View Related

Excel 2010 :: VBA - How To Convert A Range To A Table

Jan 27, 2014

I am relatively new to VBA and am trying to convert a range of data to a table in the same sheet. I receive the following message when I try to run the code as shown below:

"The worksheet for the table data must be the same sheet as the table being created." The code stops on the third line of the code.

Sheets("Data Forwards").Select
ActiveSheet.Range("$A$1:$U$1000").Select
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$U$1000"), , xlYes).Name = _
"Table1"
ActiveSheet.Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleMedium2"

I can see that the range is highlighted in the sheet before the code breaks.

View 3 Replies View Related

Excel 2010 :: Convert Formulas To Corresponding Text Based On ID

Jul 22, 2014

I have an excel file with 2 sheets. Sheet 1 has a column that contains formulas (ie (18299*11151)/20067 ) Those numbers are IDs referencing questions stored in Sheet 2. What I would like to do is find a way to look up those questions and place them into the formula instead of the ID numbers.

View 6 Replies View Related

Excel 2010 :: Convert Matrix Data To A List?

Oct 16, 2013

I have been using Excel to record the routine daily issue of items to different groups in a matrix layout, I use a different workbook for each month with worksheets for each group. The matrix takes the form of the item issued being the left hand column and the date issued the top row of the matrix, the quantity issued is recorded at the intersection. Each item can have a different quantity issued on different days. I'm using Excel 2011 for Mac but could use PC Excel 2010. Is there a way to convert the data held in this way to a list? What I'd like to achieve is a list showing the Item, the Quantities Issued and the the Issue dates

View 9 Replies View Related

Excel 2010 :: How To Convert Sheet To PDF And Attach To Outlook Email

Jan 30, 2012

I am looking for a macro that will convert the active sheet in an Excel 2010 file to a PDF, attach the PDF to an Outlook 2010 email message, and fill in the subject line and recipient address which are the same each time.

View 3 Replies View Related

Excel 2010 :: Convert Numbers To Dates Automatically In Workbook?

Mar 19, 2012

1- I dont know why but sometimes excel 2010 converts numbers to dates automatically in my workbook. I use this macro to solve the problem, but since last week it is not working. I get an error: "Method 'NumberFormat' of object 'Range' failed".

2- because it should work in all cells of the workbook, the macro must make changes only in the cells with absolute numbers (ex: 1223) but must not change if in the cell there is a date like 12-may-2012 (numbers with hyphens).

This is my function:
_____________________________
Sub PuxaDatas()
Dim sht As Worksheet
For Each sht In ActiveWorkbook.Sheets

[Code].....

View 1 Replies View Related

Excel 2010 :: VBA - Convert Selected Ranges In Multiple Sheets Into One PDF

Feb 10, 2014

I'm using Excel 2010 and would like to know if it's possible to convert selected ranges in multiple sheets into one PDF file? For example, I want to select range("A1:O10) in Sheet1 and range("A1:N25") in Sheet2, then convert both Excel sheets into PDF file with two pages.

View 2 Replies View Related

Excel 2010 :: How To Convert Numeric Dates Into Proper Date Format

Aug 21, 2013

I have a column of dates formatted as:

20130201

The cell format in the column is General.

I need to change it so that the format looks like this:

02/01/2013

Is there a quick/easy way to do this in Excel 2010?

View 2 Replies View Related

Excel 2010 :: Convert Multiple Columns To Rows Depending On Input Value

Jul 6, 2014

I have lot of data in Excel 2010 which I wish to bring in Columns using a Macro depending on the input value which the macro should prompt me. For E.g.:

A1B1C1D1E1F1G1H1I1J1
12345678910
12345678910
12345678910
12345678910
12345678910

If I select data from A1 and J1 (in practical it will be more Columns) the Macro should prompt me how many Columns would be the output on Master Sheet. If the input is 2 then it should create an output Sheet "Master" and should show the following result

A1B1
12
12
12
12
12
34
34
34
34
34
56
56
56
56
56
.. ..
.. ..

It after selection I run the macro and input 3 then the output should go in three columns (A1,B1,C1) one below other. If 4 is Input then 4 Columns (A1,B1,C1,D1) will come below each other so on and so forth.

View 6 Replies View Related

VBA Convert To Proper Case

Jun 30, 2013

I've had good success with the following line of code

Code:
Sheets("Test").Range("A2") = UCase(Sheets("Test").Range("A1"))

But how do I do the same, converting the to Proper Case?

View 2 Replies View Related

Convert Text To Upper Case

Jul 18, 2014

Is there a way of selecting text and converting it all from lower to upper case?

View 3 Replies View Related

Function To Convert All To Upper Case?

Oct 24, 2012

In cells A1:A45 i have all lower case names...how would i use a function to convert all to upper case

View 6 Replies View Related

Shorten String And Convert To Upper Case?

Mar 7, 2013

I got a list of counties in Texas, but the list is in mixed case and always has a " County" after each one. I got it converting to upper case, and have tried removing the " County" but no luck. Below is the code I have:

Code:
Sub TEXAS()
For a = 1 To 254
R = "D" & a
i = "a" & a
ActiveSheet.Range(R) = UCase(ActiveSheet.Range(i))
Next a
End Sub

View 7 Replies View Related

Convert Selection Text To Lower Case

Aug 3, 2006

A sample macro has EXACTLY the effect that I want, but contains absolute references. I want it to operate on a string selected by the mouse. How can I make that conversion ?

The successful macro will change the case of text I select to lower case.

View 5 Replies View Related

Excel 2010 :: Convert Text To Number And Format Number Without 2 Decimal Places?

Oct 23, 2011

I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.

[URL]

View 4 Replies View Related

Calculating Age Of Open Cases

May 27, 2009

I've spent some time looking through previous threads and found some help, but can't quite get what I need.

I am just trying to look at the age of open cases in a report. I want to know in hours (and maybe minutes) not including weekends. I have the created date and time in J2 and "Now" date and time in K2.

I've used the following that I got from another thread: =NETWORKDAYS(J2,K2-1+MOD(K2,1)-MOD(J2,1))

But it seems to be only giving me hours in 24 hour increments. For example a case raised on 22/5/09 gives a time of 72.00 this morning.

View 14 Replies View Related

Matching Cases And Data?

Oct 14, 2013

I have data collected at 2 time points. Participants have a unique alphanumeric ID that is the same at both times. I need to merge the data into one sheet where each case has all of the information from time 1 and time 2. There are many more cases at Time 1 (nearly 2000) than at time 2 (around 340).

I have prepared an example of what I need (see below), but have lots (around 300 at each time point) more variables than what has been put in the sheet.

Example.xlsx

View 6 Replies View Related

Coding Multiple Cases In VBA

Mar 24, 2009

I am writing VBA code to do the following:
IF A1 > 50 then print array C1:E7

I have this code and it works.

View 14 Replies View Related

IF Function For Last Occurring Unique Cases?

Mar 26, 2014

I have an excel file that lists individuals who came into the clinic on a given day. I am interested in figuring out the amount of unique individuals in a given month/overall. As this is a working datasheet, I would like a formula that would automatically update this information for me. Here is an example of the file that I am working with: unique case example.xlsx

Specifically, I want an IF function that could place an 'x' in column E depending on if the name in column C is a unique instance. But if the name appears several times in the list, I would also like this function to place an 'x' in column E next to the last occurring unique instance. For example, the name 'Hanna D' occurs 3 times in the spreadsheet I have attached, but I want the 'x' to be next to the most recent incident, when she was screened, as opposed to when she was not contacted (missed/doc forgot).

I am not sure if you can even define a unique case in the IF function, let alone the last occurring unique case.

I am not interested in conditional formatting (highlighting duplicate cases and then placing an 'x' next to the most recent highlighted case) because my spreadsheet has 300+ individuals and it is very time consuming to manually move the 'x' when the same individual appears at a later time.

View 4 Replies View Related

Multipal IF Formatting Cases In Presize Coloum

Nov 29, 2009

I have one excel file. I want calculate no of days in coloum ( L16 & L17)
If Coloum C3 is 400 & C4 is NORMAL then automatically calculate no of days in L16 & L17 as per J16, J17 (hrs) & K16, K17 (running). we highlighted in yellow. refer attach file for ur ready ref.

View 2 Replies View Related

Examine Random Numbers Of Cases Every Week

Feb 25, 2014

I have to examine a random number of cases every week. I used to have a little app that had a spot to ask me how many random numbers I need. So lets say this week I need to examine 15 cases, I'd enter in 15. Then it would ask me a range for the random numbers. So, lets say there are 250 cases, so I'd type in 250. Then it would spit 15 unique random numbers in sequential order. So, then I could look at me list of 250 case and review those 15 that the random number generator spit out.

Well, we just upgraded our computers to Win 7 and that little app does not work anymore. I've been playing around in Excel, and I've gotten pretty close to getting something thrown together, but I can't get it to work just right...

View 6 Replies View Related

Find The MODE Of Cases/pallet By Item Number

Aug 28, 2008

One has the master data in it ( Item #Lot#/Cases per pallet/date ) = 30K rows
Second is the list of item #'s .

I need to find the MODE of cases/pallet by item number.

View 9 Replies View Related

Add Characters Between Lower Case And Upper Case Letters

Aug 26, 2009

I have a string of names that run together without spaces or commas between each name.

"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.

Is there a way to add a comma and space between a lower case and upper case letter?

View 7 Replies View Related

Proper Case/Sentence Case In Macro Code

May 8, 2008

Sub Addy()
Do Until ActiveCell. Offset(0, -4) = ""
Renamer = Proper(ActiveCell)
ActiveCell = Renamer
ActiveCell.Offset(1, 0).Select
Loop
End Sub

fail? Trying to remove all capitals from names/addresses. Error message is "compile error - sub or function not defined"

View 6 Replies View Related

Excel 2010 :: Getting Outlook Warning (2010) While Sending Email Through Macro

Mar 25, 2014

I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.

View 6 Replies View Related

Select Case, Case Else Copy From Above Cell

Jun 3, 2009

I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.

Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"

Rather then returning "N/A", how could I reference the cell above and just copy it instead?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved