to complete the field using the other sheets value if it's not empty, where $K$7 references a worksheet name based on the previous month.
It's working just fine, but I want to copy and paste it into other cells having the referenced cell, C45, change as I move it around the sheet (if I copy and paste it 3 cells to the right it would become =IF(INDIRECT($K$7&"!C48")>"",INDIRECT($K$7&"!C48"),"").
I haven't been able to find a way to make the C45 cell reference dynamic while copying and pasting. It would save me a ton of time if I could.
TRANS_Cost = B:B on FEB tab TRANS_Cat1 = C:C on FEB tab TRANS_Cat2 = D:D on FEB tab CAT_Main3 = "Everyday_Expenses" TRANS_Status = E:E
In short the formula adds the total cost of anything 'tagged' as Everyday_expenses, computer items, paid. I want to adapt it so that it takes the value from a defined cell such as Month, so that data can be pulled by month.
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name 2. Select Move or Copy, 3. Select Create a Copy 4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
I'm trying to do conditional formatting that applies to an entire column (that way there are fewer conditional rules), but it only applies to a certain range of cells within that column. So what I did was setup the rule such as:
Applies To:
=$B:$Z
Formula I want to use:
=AND(MOD(ROW()-3,49)=38,INDIRECT("B"&ROW()-4)>=0)
If I copy the entire formula into a cell on the spreadsheet itself, it works just fine returning TRUE and FALSE depending on what row I'm on.
However, the above formatting rule does NOT format ANY row. But if I remove the AND function and the first condition (the one that limits which rows it's actually going to apply to) then it will work...OR if I do NOT use the INDIRECT function then it seems to work, it's some weird combonation of using the two together that is causing it to not evaluate to true.
Oh, and I thought of trying to get the formatting to work with the INDIRECT...then I put in the AND function but the only parameter was the original INDIRECT function (see below)...it stops formatting!
I am using the following formula to copy the name of the tab - =MID(CELL("filename",C26),FIND("]",CELL("filename",A1))+1,6)
I have a marco that creates a tab from a Master file, and I need to copy the name of the tab into cell A2, using the formula above. Then I use a vlookup on this cell, to get the data needed for about 10 other fields. I have these vlookups in the Master file. The vlookup doesn't work all the time. I get a #NA answer. Sometimes it does work. When I manually type in the project number on the tab, the vlookups work.
Sample of the vlookup: =VLOOKUP(A2,'AC-Program'!$A$1:$H$58600,2,0)
I was trying to find a way to use a value in cell A2 instead of the formula above, but I don't want to have to manually update it, I need it to be generated when the Marco generates the tabs.
Here is my macro:
Sub CreateSheetsFromAList() Dim ws1 As Worksheet Set ws1 = ThisWorkbook.Worksheets("Master")[code]......
Is there a way to add this function into this macro, and it will leave this field as a value instead of a formula?
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I am running Excel 2010. I have two separate instances of Excel running. I select data and copy it, and then paste it into the other excel spreadsheet in a separate instance. The clipboard data DOES NOT paste the desired data, instead it pastes the item most recently copied in the separate Excel instance that I am trying to paste into. It's as if the excel instance has it's own clipboard, and is unable to use the same clipboard the other Excel instance is using. Copy and paste functions / clipboard seems to working perfectly outside of the Excel program.
I have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
I'm using Microsoft 2010 and as like many others here I cannot find a way to paste into visible cells only i.e. the data I want to add to my variables is only available for every five years, but my data ranges 1990-2010 each year, so I have filtered my data to the 1990,1995,2000,2005,2010 so that I can paste the new data in, but of course it pastes into 1991 1992 1993 etc instead of the filtered results.
I've tried the find and select visible cells only but it says when you try and paste into them that it is not possible for more than one cell at a time.
I am using excel 2010 and cant see the paste special options in any of the worksheets. If I restart my laptop then it shows up. I noticed that after opening Internet explorer, the options disappear once again and restarting the system brings them back.
I have the following macro that imports a copy of data into a worksheet. I would like it to paste the data below in first empty row (where column A is empty) instead of A1. I am using Excel 2010.
Paste URL as Hyperlink: I just want to paste a bunch of urls into a spreadsheet and have them automatically formatted as urls. i've checked my auto-correct options, and i have selected the checkbox that says: replace as you type/internet and network paths with hyperlinks.
See attached. if you copy and paste a url into the spreadsheet, it will be formatted as text.
Format Existing URLs as Hyperlinks : the attached spreadsheet contains urls that have been copy & pasted. is there a way to format them as hyperlinks all at once?
When I copy a cell with CTRL-C and paste elsewhere, a small clipboard pop-up appears to give paste options. The pop-up is the size of an average 'starter' cell. I find it a nuisance as it always covers a cell I might want to paste into, but I cannot see that cell anymore because of the pop-up. How can I get rid of the pop-up?
Excel 2010, Windows 8.1. I want to retrieve a photo from a folder and paste it into a cell. I have the paste and format process figured out but I'm having trouble putting the file path together to retrieve the photo. If I use the full path, the statement below retrieves "IMAG1234.jpg" and puts it where I want it.
I'm currently using Excel 2010. Before, when ctrl+v'ing a cell that wasn't a number (but was, for example, a function), I could immediately after press ctrl, bring up a paste menu, and press v to paste as a value.
So before, if I had a range of cells that were functions (say something simple like "=D3/E3" on F3 and dragged down), I could do the following to paste the range into another worksheet:
1. Ctrl+shift+down to select the entire range 2. Ctrl+C 3. Ctrl+V into a different worksheet (at which point everything shows up as either "#DIV/0!" or as the wrong number, depending on cells to the left) 4. Ctrl (brings up the paste menu) 5. V (selects "values") 6. The entire range is now pasted as values, and not as functions
Recently, however, clicking on "ctrl" after pasting brings up no paste menu. I haven't changed any settings. I will lovingly serenade the first (and second, and third) man (or woman) that figure out what settings I must change or what I must do differently.
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I have a spread sheet with 2 columns that I have applied conditional formatting to to find duplicate values. So the duplicate cells are highlighted in red now.
Problem - I want to copy only those red cells to a new column in a new tab, and am having a devil of a time figuring out. Best case would be some sort of formula I could use on the new tab&column to do this.
I have two spread sheets that I 'converted' into tables. I need to combine them into a single sheet. When I attempt to copy and paste from one to the other the formatting and formulas do not carry 'down' as they do when I manually enter a new line or record.
Is there a way to copy multiple rows of data from one tabled sheet to another tabled sheet?
I have a not too big catalog in Excel format (2010). Each row has a picture. Now, I need to generate sales report. Some items do not sell. For report purpose, I want to delete those rows along with the pictures. Possible to do so? I did an Internet search and found that drawing objects are not bonded to a row or a cell. Seems to me I cannot selectively delete picture in a particular row. True?
