Excel 2010 :: Copy And Paste Function?
Apr 18, 2012
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
View 2 Replies
ADVERTISEMENT
Mar 18, 2014
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
View 3 Replies
View Related
Apr 8, 2014
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
View 14 Replies
View Related
Aug 2, 2013
I'm working in Excel 2010 on a sheet that will be compiling data from a different worksheet based on the current month. I'm using the formula:
=IF(INDIRECT($K$7&"!C45")>"",INDIRECT($K$7&"!C45"),"")
to complete the field using the other sheets value if it's not empty, where $K$7 references a worksheet name based on the previous month.
It's working just fine, but I want to copy and paste it into other cells having the referenced cell, C45, change as I move it around the sheet (if I copy and paste it 3 cells to the right it would become =IF(INDIRECT($K$7&"!C48")>"",INDIRECT($K$7&"!C48"),"").
I haven't been able to find a way to make the C45 cell reference dynamic while copying and pasting. It would save me a ton of time if I could.
View 3 Replies
View Related
Mar 27, 2014
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
Using excel 2010
View 4 Replies
View Related
Jun 13, 2014
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
View 4 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jul 2, 2014
I am running Excel 2010. I have two separate instances of Excel running. I select data and copy it, and then paste it into the other excel spreadsheet in a separate instance. The clipboard data DOES NOT paste the desired data, instead it pastes the item most recently copied in the separate Excel instance that I am trying to paste into. It's as if the excel instance has it's own clipboard, and is unable to use the same clipboard the other Excel instance is using. Copy and paste functions / clipboard seems to working perfectly outside of the Excel program.
View 4 Replies
View Related
May 23, 2013
I have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
View 1 Replies
View Related
Mar 15, 2014
I'm using Microsoft 2010 and as like many others here I cannot find a way to paste into visible cells only i.e. the data I want to add to my variables is only available for every five years, but my data ranges 1990-2010 each year, so I have filtered my data to the 1990,1995,2000,2005,2010 so that I can paste the new data in, but of course it pastes into 1991 1992 1993 etc instead of the filtered results.
I've tried the find and select visible cells only but it says when you try and paste into them that it is not possible for more than one cell at a time.
View 7 Replies
View Related
Apr 9, 2012
I am using excel 2010 and cant see the paste special options in any of the worksheets. If I restart my laptop then it shows up. I noticed that after opening Internet explorer, the options disappear once again and restarting the system brings them back.
View 1 Replies
View Related
May 30, 2012
I have the following macro that imports a copy of data into a worksheet. I would like it to paste the data below in first empty row (where column A is empty) instead of A1. I am using Excel 2010.
Sub Update ()
' Import_New_data
'
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
[Code]....
View 2 Replies
View Related
Oct 21, 2012
Need a simple macro for paste value - it used to work in Excel 2003 but not 2010.
View 1 Replies
View Related
Nov 9, 2012
Not sure if it's me or a new change in excel 2010, yet creating a simple macro as listed below does not work.
Outside of macro I will select a range of data and copy.
Then, using macro I'd like i to perform: paste special values, in the current cell
View 5 Replies
View Related
Jan 24, 2014
The situation I have on my hands is over 200 users, were the majority can't use Excel's built in function to create PDF's.
Yes, I've tried to teach them, but I'm probably not a good teacher.
So, I've resorted to create a button at the top of the worksheet, that says "Create PDF". I thought this was gonna be very easy to program, but alas.
Is there a way to start the built-in Excel dialog that happens when you click "Create PDF/XPS" in "Save & Send"?
View 4 Replies
View Related
Dec 21, 2011
Having problems with the code below on a 2010 Excel spreadsheet. The function flags me at first line and highlights Mid. I get a "compile error, cannot find project or library". I'm trying to set GetSheetName = m_sSheet but the GetSheetName function is not declared as returning any type.
Code:
Function GetSheetName(ByVal m_sFormula As String) As String
Dim m_sSheet As String
m_sSheet = Mid(m_sFormula, 2, InStr(m_sFormula, "!") - 2)
If InStr(m_sSheet, "'") Then
m_sSheet = Mid(m_sSheet, 2, Len(m_sSheet) - 2)
End If
GetSheetName = m_sSheet
End Function
View 1 Replies
View Related
May 16, 2013
Using excel 2010 on PC.
Paste URL as Hyperlink: I just want to paste a bunch of urls into a spreadsheet and have them automatically formatted as urls. i've checked my auto-correct options, and i have selected the checkbox that says: replace as you type/internet and network paths with hyperlinks.
See attached. if you copy and paste a url into the spreadsheet, it will be formatted as text.
Format Existing URLs as Hyperlinks : the attached spreadsheet contains urls that have been copy & pasted. is there a way to format them as hyperlinks all at once?
View 1 Replies
View Related
Apr 19, 2012
When I copy a cell with CTRL-C and paste elsewhere, a small clipboard pop-up appears to give paste options. The pop-up is the size of an average 'starter' cell. I find it a nuisance as it always covers a cell I might want to paste into, but I cannot see that cell anymore because of the pop-up. How can I get rid of the pop-up?
View 2 Replies
View Related
Apr 20, 2014
Excel 2010, Windows 8.1. I want to retrieve a photo from a folder and paste it into a cell. I have the paste and format process figured out but I'm having trouble putting the file path together to retrieve the photo. If I use the full path, the statement below retrieves "IMAG1234.jpg" and puts it where I want it.
ActSheet.Pictures.Insert("C:UsersEljafeDocuments1-QCReport_PhotosIMAG1234.jpg").Select
But if I have a different photo file name as a string in a cell (e.g. "IMAG5678.jpg") what is the syntax to attach it to the file path? i.e
ActSheet.Pictures.Insert("C:UsersEljafeDocuments1-QCReport_Photos") & "IMAG5678.jpg".Select '(which of course doesn't work)
So, I have a path but I want to attach different photo number to the path from a sting in a cell.
View 2 Replies
View Related
Feb 22, 2008
Can I write Copy and paste function in an IF statement
PTPO #Part #Line #DescriptionVendor #UOMLTPO Entry #Due DateAllowed DaysWork daysQty OrderQty RecvdUnder/ OverRectp dateDays Po lateMB550427917495072PANEL, SW MOLDED SLVR0BAY008EA204/16/20075/14/200728215014-365/7/200702013135/30/2007-280232023236/1/2007-28025
formulae in the column Q " days PO, Late" =IF(P3
View 17 Replies
View Related
Jul 22, 2012
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
View 2 Replies
View Related
Dec 28, 2011
Im trying to write a code in vba in Excel 2010 that would incorporate the vlookup function in excel.
My Data Looks like this:
List 1Weight 1List 2Weight 2List 3Weight 3List 4Weight 4a2.00%j20.00%a14.00%p2.00%b4.00%k32.00%d2.00%y3.00%
c7.50%e10.00%g14.00%u6.00%d8.00%d15.00%h20.00%h7.00%e9.00%q13.00%y45.00%f8.00%f20.00%r5.00%q5.00%
d9.00%g35.00%n5.00%t10.00%h10.00%r14.00%i4.50%w15.00%b0.18Z0.04S0.04Total100.00%Total100.00%Total100.00%100.00%
Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.
What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.
So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.
The code I came up with so far looks like this:
Function AK_Overlap_Go(x, y)
Dim Temp(1 To 2, 2 To 1)
Dim x As Integer
[Code]...
One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.
View 3 Replies
View Related
Jul 22, 2012
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
View 1 Replies
View Related
Sep 16, 2012
Using Excel 2010 Pro.
I have a formula to create a string to create a lable for a Trial Balance report
=LEFT(I5&" "&REPT(".",95),101)
But the decimal portion of the string is distracting. I would like to make it a grey instaed of a black so that the text portion of the label "pops".
I don't believe I can do it with conditional formatting and I do not want to do it manually.I was thinking some kind of function or UDF like:
=LEFT(I5&" "&RGB(REPT(".",95),(191,191,191)),101)
View 3 Replies
View Related
Jan 4, 2014
I am working with Excel 2010 and I have a problem that I can't seem to figure out. I am trying to find the first nonzero cell and begin an average function from that cell and down through 29 rows (a total of 30 rows).
Sub average()
FinalRow = Cells(Rows.Count, 3).End(xlUp).Row
For I = 3 To FinalRow
If Cells(I,3).Value 0 Then
'I use the above to identify the first nonzero cell
ActiveCell.FormulaR1C1 = "average(........)
This is where I am stuck, I don't know how to code the first nonzero (which can change with different data) cell and average rows below it.
View 7 Replies
View Related
Jul 17, 2014
I think I need some version of a lookup for match function. Here is essentially what I need: I have a column of data points. I need to output every position at which the data point changes to a different value (going from top to bottom). See below for an example.
Here is some sample data (with column headers)
Position
Data Pt
1
-7.5
2
-8.0
[Code] .......
Here is the result I need (I want to put a consistent formula into the second column below that returns the results shown in the second column below):
split 1 position
2
split 2 position
4
[Code] ........
Is what I am describing possible? Because I am inserting this into a template, I ideally need to do this outside of any sort of VBA work.
View 2 Replies
View Related
Jul 30, 2014
I'm currently using Excel 2010. Before, when ctrl+v'ing a cell that wasn't a number (but was, for example, a function), I could immediately after press ctrl, bring up a paste menu, and press v to paste as a value.
So before, if I had a range of cells that were functions (say something simple like "=D3/E3" on F3 and dragged down), I could do the following to paste the range into another worksheet:
1. Ctrl+shift+down to select the entire range
2. Ctrl+C
3. Ctrl+V into a different worksheet (at which point everything shows up as either "#DIV/0!" or as the wrong number, depending on cells to the left)
4. Ctrl (brings up the paste menu)
5. V (selects "values")
6. The entire range is now pasted as values, and not as functions
Recently, however, clicking on "ctrl" after pasting brings up no paste menu. I haven't changed any settings. I will lovingly serenade the first (and second, and third) man (or woman) that figure out what settings I must change or what I must do differently.
View 1 Replies
View Related
Jan 15, 2013
How would I create a shortcut to automatically copy the contents of cell H1 to cell K1, in other word I would like to hit a shortcut key and have the contents of that cell pasted 3 cells to the right on the same line. I have to do this over and over again down the worksheet. I am working on taxes and want to copy values over to the expenses column as I find them.
I would also like to know if it is possible while having cell D1 highlighted I could have a shortcut created that would copy the value three cells over in H1 to cell K1. That would be the fastest, but I don't know if it is possible?
View 2 Replies
View Related
Mar 13, 2013
I am working with some data that consists of two types of messages: one containing vessel speed and another containing vessel type. Both messages share a common ship identifier number. What I'd like to do is run through column A (ship ID), check column B (ship type), and if column b has a value, to paste that value in all instances of that ship ID.
View 1 Replies
View Related
