Excel 2010 :: Getting Simple Macro For Paste Value
Oct 21, 2012Need a simple macro for paste value - it used to work in Excel 2003 but not 2010.
View 1 Replies
ADVERTISEMENT
Excel 2010 :: VBA Macro - Paste Special Values
Nov 9, 2012Not sure if it's me or a new change in excel 2010, yet creating a simple macro as listed below does not work.
Outside of macro I will select a range of data and copy.
Then, using macro I'd like i to perform: paste special values, in the current cell
Excel 2010 :: Creating A Simple Line Marker Graph?
Mar 2, 2014I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
Simple Copy Paste Macro
Jun 21, 2007I have a really large excel file (90 Megs) And i want to copy the values and formats of certain sheets to another workbook. Ive tried using a copy/paste macro i had from work but the sheets have alot of groups and info so it kept freezing
View 9 Replies View RelatedSimple Copy Sheet Paste In Other Book But Paste Values?
Jun 20, 2013Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
Excel 2010 :: Getting Outlook Warning (2010) While Sending Email Through Macro
Mar 25, 2014I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies View RelatedExcel 2010 :: Can't Paste From One Instance To Another
Jul 2, 2014I am running Excel 2010. I have two separate instances of Excel running. I select data and copy it, and then paste it into the other excel spreadsheet in a separate instance. The clipboard data DOES NOT paste the desired data, instead it pastes the item most recently copied in the separate Excel instance that I am trying to paste into. It's as if the excel instance has it's own clipboard, and is unable to use the same clipboard the other Excel instance is using. Copy and paste functions / clipboard seems to working perfectly outside of the Excel program.
View 4 Replies View RelatedExcel 2010 :: Cut / Paste Jumps To The Top Of The Spreadsheet?
May 23, 2013I have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
Excel 2010 :: Paste To Visible Cells Only
Mar 15, 2014I'm using Microsoft 2010 and as like many others here I cannot find a way to paste into visible cells only i.e. the data I want to add to my variables is only available for every five years, but my data ranges 1990-2010 each year, so I have filtered my data to the 1990,1995,2000,2005,2010 so that I can paste the new data in, but of course it pastes into 1991 1992 1993 etc instead of the filtered results.
I've tried the find and select visible cells only but it says when you try and paste into them that it is not possible for more than one cell at a time.
Excel 2010 :: Paste Special Options Not Available
Apr 9, 2012I am using excel 2010 and cant see the paste special options in any of the worksheets. If I restart my laptop then it shows up. I noticed that after opening Internet explorer, the options disappear once again and restarting the system brings them back.
View 1 Replies View RelatedExcel 2010 :: Copy And Paste Function?
Apr 18, 2012The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
Excel 2010 :: Paste New Data In First Empty Row
May 30, 2012I have the following macro that imports a copy of data into a worksheet. I would like it to paste the data below in first empty row (where column A is empty) instead of A1. I am using Excel 2010.
Sub Update ()
' Import_New_data
'
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
[Code]....
Excel 2010 :: Copy And Paste INDIRECT Formula?
Aug 2, 2013I'm working in Excel 2010 on a sheet that will be compiling data from a different worksheet based on the current month. I'm using the formula:
=IF(INDIRECT($K$7&"!C45")>"",INDIRECT($K$7&"!C45"),"")
to complete the field using the other sheets value if it's not empty, where $K$7 references a worksheet name based on the previous month.
It's working just fine, but I want to copy and paste it into other cells having the referenced cell, C45, change as I move it around the sheet (if I copy and paste it 3 cells to the right it would become =IF(INDIRECT($K$7&"!C48")>"",INDIRECT($K$7&"!C48"),"").
I haven't been able to find a way to make the C45 cell reference dynamic while copying and pasting. It would save me a ton of time if I could.
Excel 2010 :: Paste URL As Hyperlink Or Format Existing URLs
May 16, 2013Using excel 2010 on PC.
Paste URL as Hyperlink: I just want to paste a bunch of urls into a spreadsheet and have them automatically formatted as urls. i've checked my auto-correct options, and i have selected the checkbox that says: replace as you type/internet and network paths with hyperlinks.
See attached. if you copy and paste a url into the spreadsheet, it will be formatted as text.
Format Existing URLs as Hyperlinks : the attached spreadsheet contains urls that have been copy & pasted. is there a way to format them as hyperlinks all at once?
Excel 2010 :: How To Move The Paste Options (Ctrl) Popup Box
Apr 19, 2012When I copy a cell with CTRL-C and paste elsewhere, a small clipboard pop-up appears to give paste options. The pop-up is the size of an average 'starter' cell. I find it a nuisance as it always covers a cell I might want to paste into, but I cannot see that cell anymore because of the pop-up. How can I get rid of the pop-up?
View 2 Replies View RelatedExcel 2010 :: Copy And Paste Cells Within Date Range
Mar 27, 2014I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
Using excel 2010
Excel 2010 :: Retrieve Photo From A Folder And Paste It Into Cell
Apr 20, 2014Excel 2010, Windows 8.1. I want to retrieve a photo from a folder and paste it into a cell. I have the paste and format process figured out but I'm having trouble putting the file path together to retrieve the photo. If I use the full path, the statement below retrieves "IMAG1234.jpg" and puts it where I want it.
ActSheet.Pictures.Insert("C:UsersEljafeDocuments1-QCReport_PhotosIMAG1234.jpg").Select
But if I have a different photo file name as a string in a cell (e.g. "IMAG5678.jpg") what is the syntax to attach it to the file path? i.e
ActSheet.Pictures.Insert("C:UsersEljafeDocuments1-QCReport_Photos") & "IMAG5678.jpg".Select '(which of course doesn't work)
So, I have a path but I want to attach different photo number to the path from a sting in a cell.
Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose
Jan 29, 2014I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Excel 2010 :: Pivot Table Copy And Paste Values AND Formatting
Jun 13, 2014In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
Excel 2010 :: Paste Options No Longer Showing Up When Clicking CTRL
Jul 30, 2014I'm currently using Excel 2010. Before, when ctrl+v'ing a cell that wasn't a number (but was, for example, a function), I could immediately after press ctrl, bring up a paste menu, and press v to paste as a value.
So before, if I had a range of cells that were functions (say something simple like "=D3/E3" on F3 and dragged down), I could do the following to paste the range into another worksheet:
1. Ctrl+shift+down to select the entire range
2. Ctrl+C
3. Ctrl+V into a different worksheet (at which point everything shows up as either "#DIV/0!" or as the wrong number, depending on cells to the left)
4. Ctrl (brings up the paste menu)
5. V (selects "values")
6. The entire range is now pasted as values, and not as functions
Recently, however, clicking on "ctrl" after pasting brings up no paste menu. I haven't changed any settings. I will lovingly serenade the first (and second, and third) man (or woman) that figure out what settings I must change or what I must do differently.
Excel 2010 :: Worksheet Move / Copy Function And Paste Special / Columns Widths
Mar 18, 2014I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
Excel 2010 :: How To Save Excel File As Cell Reference Using Macro
Mar 5, 2012I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
Excel 2010 :: Macro To Change Excel Formatted Table Name Dependent On Number Of Loops
Jul 9, 2012Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
Adjust Macro From Excel 2003 To Excel 2010?
Apr 1, 2014I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
Excel 2010 :: Paste Picture Into Small Picture / Diagram Box?
Mar 19, 2012In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
View 1 Replies View RelatedExcel 2010 :: Save As PDF Macro?
Apr 10, 2013I need to create a macro that will allow me to save a PDF from an XL file I am creating by running a report out of Access. This report yields a workbook with 2 sheets in it. The first tab (sheet) called "Mishkon" and the second called "Women's League". I need to save these reports separately as PDFs and they need to be saved in seperate locations. The first sheet (Mishkon) needs to be saved here: \OSOFSDataDayHabMishkon . The second sheet needs to be saved here: \OSOFSDataDayHabWomen's League . Here is the twist... Both sheets need to take their name from their G3 cells. I have Excel 2010 and dont want to print from my Adobe PDF printer. I would like to save as a PDF so I can run it off of computers that dont have the Adobe PDF printer installed.
View 5 Replies View RelatedExcel 2010 :: What Causes A Macro To Run Slower At Certain Times
Apr 2, 2014When I run macros usually they're fast, but occasionally will run very slow. An example macro I have is pasted below. It's just a simple macro that pastes months. If I am pasting on top of a cell that contains a month it pastes the rest of the months that follow.
Most of the time this macro runs very fast, but occasionally it takes about 1-2 seconds to run, and it is a very simple macro! It is not macro specific, as all my macros will be slow. I''m using Windows 7 with Excel 2010. I'm only using 23% of my CPU and 4.5GB of my 16GB of RAM, so I don't think it's a hardware thing.
Is there some kind of condition that occurs that will make excel run macros slower?
[Code] .....
Excel 2010 :: Run Macro In Another Workbook Without Copying It?
May 21, 2014I used the button in Excel 2010 to record a macro that allows me to format a workbook font and stuff because i do that many times a day for several workbooks. However I want to be able to just push a button and have all open workbooks run the macro I recorded.
I am able to make a button- thats easy, but how do I get it to run for ANY workbook? My problem is that apparently it only runs the workbook that is named a certain way. should i post the code here?
Excel 2010 :: VBA Script To Run A Macro On The Every Hour?
Jul 11, 2014writing a VBA script that will execute a refresh macro every hour on the hour.
Using Excel 2010
Excel 2010 :: Macro To Set Value Of Selected Cells?
Mar 27, 2012The concept is to have a user open a sheet that breaks down that current day into 15 minute blocks of time. Later, I will work to append that to an Access DB or to a master Excel sheet as I will have multiple engineers inputing times for multiple days. There are multiple paths for this....We don't have Access for everyone yet or I would look at that path now.
Right now I am trying to make the initial input screen easy to use so that they actually use it.
I want to allow the user to select multiple 15 minute blocks and then click a button that adds a specific value to each of those cells. For instance, they might choose 8 15 min blocks that are not necessarily blocked together (C5, C7:C10, C15, C20:C22) They would hit the "Project 1" button and "Project 1" would be inserted into each of those cells.
I have about (5) categories so I would simply have (5) buttons with the different inptu strings.
But how can I have a macro set the value for multiple selected cells? Ideally, they would not have to be blocked together but, if there is no other way, if I could have blocks of cells filled in all at once.
I am using Excel 2010.
only a few of us have Access but I will be the only one accessing the collected data. Besides, I would make Excel query the Access DB for more general use. I