Excel 2010 :: Copying Data But Not Names Ranges From One Workbook To Another?
Dec 1, 2011
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
I used the button in Excel 2010 to record a macro that allows me to format a workbook font and stuff because i do that many times a day for several workbooks. However I want to be able to just push a button and have all open workbooks run the macro I recorded.
I am able to make a button- thats easy, but how do I get it to run for ANY workbook? My problem is that apparently it only runs the workbook that is named a certain way. should i post the code here?
I have problems copying data (from notepad, values are in scientific notation) into Excel 2010 worksheet. This problem only occurs with one of my laptops. I also tried this on my partner's laptop and no problem at all.
My new laptop (which I would like to use in the lab) has Windows 7 professional installed on it. I bought my laptop in Austria/Germany, so I changed the language from German to English. I then installed Microsoft Office 2010 on my laptop (which I am also using on my main laptop- without any issues). I have changed my default language to English UK.
The issue is as follows: Here is a small sample of the data from notepad
I select & copy the data from the notepad (also tried notepad++) and paste it into the Excel 2010 worksheet. This is what I get in Excel: 3.33E+02 1.51E+02 0.00E+00 0.00E+00 4.97E+04 3.85E+02 6.24E+05 1.81E+08
When I use another spreadsheet package (MagicPlot Student version), there are no problems. I have also installed Notepad++ and experience the same issue. So somehow Excel is increasing the value by 5 orders of magnitude. When I copy the values from another Excel sheet into a new Excel sheet, there are no problems. I have re-installed the Microsoft Office suite several times and the problem is still there. I can't re-install Windows 7 as I don't have the installation discs.
I have extracted a lot of data (from a webpage), onto Sheet 1 of my Excel 2010. The results I have obtained of this data I have extracted might occupy cells A1 to F1.
I want to keep doing this over and over, copying and pasting data from a webpage onto Sheet 1, then obtaining various results and adding those results under cells A1 to F1, which would of course be A2 to F2.
Is there any way these results can be transferred to say Sheet2, but of course occupying a new line each time so that at the end of the day, I have a list of results.
Of course I could just copy and paste them to say Sheet2, under each other, just wondering if there was some tricky way.
I need something that will take data from columns in one Spreadsheet and put in difference cells in a row. I know this could be done with recording a macro but the number of column will never be constant.
Below I attached examples of the Spreadsheet
Financials SpreadSheet Need to have the data in column B to F put their respective cells in row in the Master Spreadsheet So we would have 5 rows.
I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.
Im using Excel 2010 and have a data connection that I want to use. I added it to a regular workbook and it updates perfectly as-designed. However, I need this feature to work in a shared workbook, but it doesn't.
I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
I am using Excel 2010. I created a macro to fill a report. Each section of the report is a department, each department has 53-55 (I forget the exact number) lines underneath the department number. So in the macro, for each department I am trying to use the code block
If Not IsNothing Then If WorksheetFunction.CountA(Cells) > 0 Then LastRow = Range("D60:D114").End(xlUp).Row
The font in red is the variable range. The first department has Range("D58").End(xlUp).Row for example. When I run the second department, it finds the empty cell under the first department's section. For example: I go to run the second department with the range of D60:D114, the cell that is selected by the "Address = "portion of the code is D10, because D4-9 has information in it.
What I need is for it to see that D60 (or D61, etc) is empty and paste the copied information into that cell. I am trying to find a way to do this without using "If cell D60 > 0 Then Activecell.Offset(1,0)", because this is a yearly report being filled in every week.
My problem is when I refer to the first worksheet from the second worksheet it shows blanks where there are no names. For example i want the second sheet [ LOC ] to show the names that appear under Truck #1, #2, #3, #4 - but truck #1 may not always have names under it?
I am using Excel 2010. I have a spreadsheet where column A is for Quarter, column B is for Employee, and columns C-R are for Codes (Code1; Code2; Code3; etc. through Code15). One line might have no values in the codes columns, another might have values in only Code1, another might have values in Code1 and Code2, and another might have values in all 15 columns.
A B C D E F --> R 1 Qtr Emp Code01 Code02 Code03 Code04 --> to Code15 2 2012.1 Liz CER02 INS12 WKH15 3 2012.2 Jim PIN55 WKH12 WKH19 WKH23 4 2012.2 Jon 5 2012.2 Jim WKH15 WKH23 6 2012.2 Jon PIN55 WKH15 WKH12 CER08
The worksheet is named "ALLAUDITS" and the named ranges are as follows:
On another worksheet I need to be able to count how many times WKH15 appears in the CodeData range within a certain Quarter. I tried
But that didn't work, and from what I can tell in Excel support, it's because the ranges are different sizes. I have over 6500 rows, so I'm trying to avoid having to name all 15 columns and then do a sumproduct on all of them, such as
I am trying to come up with a formula that will return a total average from two columns of dates with criteria. The range will need to cover an entire column as my data is continuously growing and the criteria would have to limit the start date to each month. I have tried
I have got a table with data from 2005 to date, (for example) For the purpose of what I am doing I need a column which shows date ranges between September 2005 - August 2006 to show as 2005/2006, then September 2006 - August 2007 to show as 2006/2007. I have done some research and seen that, Potentially, a nested 'IF' can be used but it can only be used 7 times which would cause a problem going forward....
Is this the only way or is there a better way (without using VB)?
I'm using Excel 2010 and would like to know if it's possible to convert selected ranges in multiple sheets into one PDF file? For example, I want to select range("A1:O10) in Sheet1 and range("A1:N25") in Sheet2, then convert both Excel sheets into PDF file with two pages.
I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
I have a workbook containing two worksheets of staff training records.
The first work sheet contains a list of names and the dates they completed various training courses. I have used some simple date based formulas and conditional formatting to colour-code their name depending on whether their earliest retraining due date has passed, is coming up in the next few weeks, or is a long way off. The data is set out alphabetically, one person per row of data.
The second sheet contains the same list of names, but each person's data is split across two consecutive rows. The cells in column A which contain the staff names are merged in pairs so that the name heads both rows of data.
I want the colour coding of the merged name cells in sheet 2 to automatically copy the colour coding applied to the single name cell in sheet 1, but don't know how.
formula to take a value from one sheet and add to it in Excel 2010? I'm naming the sheets but not necessarily numerically. I have done it by manually entering the sheet name but would like it to figure out the sheet name automatically based on where the sheet is located in the workbook. That way I can copy the current sheet, rename it and still have it update properly with a running total. Here is what I have now: =D7+'011514'!E7
The easiest way I can describe the scenario I am trying to create, is to use a company list of personnel (my index) and to generate a time-sheet workbook per person based on a pre-populated template. This time-sheet is saved as the persons name and has the persons name entered into cell D:10
I have a workbook which contains two worksheets;
1) An Index sheet which contains a list of names that I wish to use in Q16 downwards (note the length of this list will vary each time I run this)
2) A "template" sheet which I wish to duplicate in new workbooks
3) A second "data" sheet that I wish to copy across in new workbooks
I need a macro that will take the "template" and "data" sheets and copy it into a new workbook, renaming each new workbook to each name in my Index sheet. I also want that same Name to be copied into cell reference D:10 of the "template" each time.
The end result is that I should have a series of new files generated and saved which are named the same as the Index list, with both the "Template" sheet and the "Data" sheet present, with the cell D:10 pre-populated with the Name provided in the "Template" sheet.