Excel 2010 :: Using Autofill On Spreadsheet That Includes Filtered Column?
Jun 27, 2014
I am working with a very large spreadsheet 10k references... I need to add sequential numbers in a column to identify the references but I need to use he filter in the author column due to the way my referencing software exports the data...
When I try to use the pull down autofill it just keeps repeating the last or second last number of the cell - the autofil box that usually appears has disappeared.
I have been struggling to find where my code is throwing up an error 1004 on the last line of the below code. I have a number of tables which will update automatically from Pivot tables on another sheet.
So the first part of the code is adding in the new column and then I want to autofill the date into the headers of the column which I thought the below would do, but I just don't understand why I keep getting the error. My data is dynamic as it will grow month by month which is why I am using R1C1 referencing.
Is there a formula similar to WORKDAY that would include weekends and make something due on the next business day? For example, I have a bill due on 6/1/11 and I need to follow up 5 days later - which would be normally 6/6/11 but the WORKDAY formula makes it 6/8/11 as it is adding 2 extra days.
I have this code in a macro, the range will change as more data is added. so that I dont have to keep changing the range. How can I have this code autofill from the activecell to the last cell that has data in column M.
I'm using Excel 2010 and I wrote the code below to autofill a range that feeds a chart on the worksheet "Dashboard." Essentially, the user selects criteria on the Dashboard and clicks the "Submit" button, which causes an advanced filter to copy the data that matches the criteria into the range Sheets("HiddenSheet").Range("A2:H"). I need the code below to autofill the formulas in I3:Q3 in I:Q until the last row in A:H, but I keep getting a "Type Mismatch" error on the bolded line below.
One note - Columns K:Q contain formulas that feed off of Column C and into Column J - that's why the autofill range is different than the chart SetSourceData range.
Sub TimelineControl() Dim Timeline As Chart Dim ws As Worksheet Dim rngforTimeline As Range Dim LastAxis As Integer Dim LastA As Long
I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.
On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.
In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g
X X X Z X X X Z X X X Z X X X X X
Now this happens
X X X Z X X X Z X X X Z X X ...Z X X X Z
How can I stop this as I need to enter different data in the next section?
How we can select specific cells in the filtered data using VBA in Excel 2010.
I need to select 10th column, 5th row data .. or 10th column, 6th row data .. or 13th column, 8th row data...
How to select this data using VBA.. I am struck here .. If I give the below code.. the hidden cells inbetween the filtered data is getting selected.. only the first row is getting selected correctly.. i.e, ..rnVisible(1, 2).Select .. If I change the row like rnVisible(2, 12).Select its selecting the hidden cells ..
Dim rnVisible As Range Set rnVisible = ActiveSheet.Rows("2:10000").SpecialCells(xlCellTypeVisible) rnVisible(2, 12).Select MsgBox ActiveCell.Address
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date Row 2 = Swimmer and PB's After set date and upto Todays date Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered) Device (Filtered) Lan (filtered)
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
I'm trying to copy a whole bunch of tables with identical layout to a master table, so I can create a whole bunch of pivot tables that include data from ALL the various tables. The source tables MAY be filtered, and I can't work out how to copy them easily while also INCLUDING any hidden/filtered rows while at the same time leaving any filter settings on the source tables intact.
If I use something like range("Table1").Listobject.DataBodyRange.Copy then it only copies the VISIBLE rows.
But I want ALL rows to be copied to a master table.
1. I don't want to unfilter the sources tables, because users might still want the source tables to remain exactly as the user filtered them. (However, it doesn't matter if the DESTINATION list is filtered or not). I realise that I could copy the entire sheet to a temp sheet, then unfilter any tables on that sheet and THEN copy these to the master list. But wan't to know if there's a simpler way.
2. I DON'T want to use SQL to create a pivot table directly from the tables, because the tables will have further information added to them from time to time, and so if I use SQL to make a pivot directly from them, I'll have to recreate the pivot cache using that SQL query each time, which might muck up the settings in any existing pivot tables. I realise that I could use SQL to copy the data to a 'staging area', and just point the pivot table at that.
3. I can't use PowerPivot, because its not installed in this environment.
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code: Sub colfrmadd() Range("A1").CurrentRegion.Select colcnt2 = Selection.Columns.Count
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
i am trying to use a small piece of code to find the last row in an excel sheet, to copy/paste formulas and data.
Dim LastRow As Long If WorksheetFunction. CountA( Cells) > 0 Then 'Search for any entry, by searching backwards by Rows. LastRow = Cells.Find(What:="*", After:=[A1], _ SearchOrder:=xlByRows, _ SearchDirection:=xlPrevious).Row End If
i am using this code like this:........................
if i filter only the DD the formula will find the last row being row 5, and the formula will fill all the cells untill that row, including 3 and 4. Is there any chance i can autofill only the active cells or filtered cells.. i don't know.
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
I'm have Excel 2010 and Windows XP. Each week I get 3 spreadsheets and each has data unique to it. Each spreadsheet has a week number column which is common to all three. I want to combine the three worksheets into one and make create several dynamic charts for management. How should I organize a large spreadsheet? In addition to my week number I have a host of other date fields. Some of the data I get is (1) vehicle VIN numbers (2) City/State/Country (3a) I break up the VIN to give me vehicle type (3b) year of assembly (3c) car type (3d) number of doors (4) mileage (5) complaint (7) defect code etc. etc. What are the do's and don't when setting up a large spreadsheet? I have data by week which goes back to 2006 and so my date fields go top-down. I inherited the three spreadsheets and would like everything under one roof, so to speak. One spreadsheet which I can make my charts.
I have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
Open a brand new spreadsheet whether the format is set to "General" or "Text" it will not let me enter numbers. For example, when I enter 2007 in the cell it displays 20 07 not really that big of space between the two zeros - but still a space. I can't format this no matter what I do.
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
As I understand it hyperlinks set in a spreadsheet should work regardless of where you save and/or copy the spreadsheet i.e. as long as the directory location of the location / file the hyperlink is referencing doesn't change (notwithstanding, the user must have appropriate access rights to the relevant directory locations)
However, the situation I have is the spreadsheet was generated and saved to directory location A (intention being this would be the 'master' yearly template) and the hyperlinks set, all of which work when you open the spreadsheet in this directory location. But when I copy the spreadsheet to directory location B, which is intended to be the yearly 'register' location for the spreadsheet, none of the hyperlinks work? When I hold my cursor over a link in the copied spreadsheet, in directory B, I do not get a 'pop-up' path like I do in directory A and when I click a link I get an error message:
Microsoft Excel The address of this site is not valid. Check the address and try again.
As stated above the documents the hyperlinks relate to have not moved, they remain in the same template directory (i.e. the link path has not altered).
I work with Excel 2010 and have a very large spreadsheet with data that I need to manipulate in several different ways. I have been filtering and then cutting and pasting but this is very time consuming . Is there a way to extract specific data from the spreadsheet and transfer it to different worksheets? I don't really know how to use macros.
I have been tasked with streamlining a process to collect data from a specific online website (Web of Science) and import it into an Excel 2010 spreadsheet.
Currently they are going to the website, entering a short number of search parameters and then manually recording the pertinent data from the webpage. They would like to be able to enter a keyword in Excel (which acts as the search item) which then automatically does the rest of the process and provides them with a spreadsheet of the required data.
Is this possible? Perhaps by using Visual Basic code within Excel? I also saw a method that employed SharePoint Server 2010.