I'm haven't played with stats in a while and now I'm trying to determine the ideal traffic/labor hour in order to maximize revenue/labor hour. My data looks like this:
Excel 2010
A
B
C
D
E
F
1
Date
Traffic
Revenue
Hours
Traffic/hr
Revenue/hr
[Code] ........
Sheet1
I don't know if Excel or Analyst Toolpak has the firepower for this or if I'll need additional tools.
I need some different columns within a row to calculate based on a statement found in an earlier column in the row. something similar to below. there will only be two statements total which are noted on the table below.
A
B
C
D
E
1
0
0
20
5%
[Code].....
So basically If column A = disposition calculate D and E in column B but if Column A = Receipt calculate in column C
The formula for D and E is not exactly as shown just using that as a quick example. I'm using office 2010.
I'm using excel 2010 and have inherited an old workbook that has seen many version updates over the years. The "view macros" list displays approx 25 macros and I know that not all are currently being used or necessary.
The main tab contains macro control buttons. Any macro not assigned to one of these controls is not necessary (it's probably old and was just never removed).
How can I determine which macros are "unassigned" to a control or otherwise invalid?
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
I have a userform that opens up to full screen, however, when i designed it everything is central and in its place, but when the userform opens full screen everything is pushed to the left and not using all the form.
I know that in VB2010 u can use docking and table layout panels for this sort of thing but VBA 2007 which I am using with excel doesnt seem to have these options?
I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.
I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.
Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.
I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.
Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.
Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty
[Code] ..........
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies View RelatedI am trying to get an exact ratio in excel but am unable to do so. Example:
60,000/58000 = 1.03. The ratio should then be 1.03:1. But excel is showing this is 1:1. Here is my formula
PHP
=TEXT(E55/E56,"0")&":1" . I need it to show it to two decimals.
I'm trying to create a quote... basically I need to find out about calculating ratios.
We have 47 students going on a trip to different venues, we offer 1:10 teachers (i.e. one teacher free, for every ten students going), however some venues offer a different ratio e.g. 1:5 teachers free of charge.
I need to somehow create a column where it will calculate the amount charged for the different ratios the venues offered.
On the attached worksheet i have blocks of data in col C in chronological order,i wish to count the number of times related data in col AG is between 1 & 3 incl (highlighted in blue) ,the result to be expressed as a % in col V,eg block A =5,col AG has 2 event between 1 & 3,so col V = 40%.I have inserted empty rows between the data for clarity,there are no empty rows in the data.
View 1 Replies View RelatedWhat is the best Aspect Ratio for a dashboard 4 X 3 or 6 X 9.
View 3 Replies View RelatedI'm working on a plan with the objective to reach a 20:80 ratio from Team 1 to Team 2
The intent of the is get 80% of the work to be supported by Team 2, which currently has no team members.
Team 1 currently has 32 team members.
I am trying to to determine if I need to hire or re-deploy employees to from one team to another or to another program to achieve the objective.
The objective is to take Team 1, which is currently doing 100% of the work & reduce that work load to approximately 20%, which then Team 2 will be supporting approximately 80%.
I started a generic calculation but I believe it's wrong.
I have a spreadsheet that calculates Reward to Risk Ratio for the stock market investing. The formula is Target Price - Entry Price / Entry Price - Stop out Price.
The problem is the ratio often comes out to something like 3/4 or 7/8.
Is there a way to reduce the result down so that the first number is always a 1 to make it more clear but still maintain the ratio. For example, 1-1.3, or 1-7.8, etc.
can Excel make a Ratio of the results of one column against another ?
eg, Col A 2.00
Col B 1.00
in Col C, the ratio result is 2 : 1
Assign values to ratio buttons
I have created a UserForm in Excel, to gather data for a questionnaire.
For each question, the user must select an answer from a radio button (Yes, No and N/A)
When I add the record (answers) to the sheet1, the results are shown as all being false.
I want to show either ‘Yes’ or ‘No’ or ‘N/A’
Private Sub CommandButton2_Click():
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)
LastRow.Offset(1, 1).Value = UserForm1.OptionButton1.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton2.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton3.Value
End Sub
Need formula to calculate employee turnover ratio and if there is a place to get a free template to download?
View 9 Replies View RelatedI am trying to come up with a formula to determine if someone is 21 years old or not. After I enter their DOB if they are 21 or over I would like the cell to turn Green, if not I would like it to turn red. I have tried alot of different formulas that primary pertain to days and months but nothing for years.
View 3 Replies View Relatedwith the following formula.
I need to find the median of Column C and Column H and then divide the median sum of Column C by the median sum of Column H. My data contains blanks so I obviously need to count cells with data only. I am trying to avoid hard coding any cells and am looking for a single formula.
below is my coding, it inserts a picture into a cell and fits to what ever the cell size is.
my cells are more landscape (fixed) than portrait, how can i still make the images fit into the cell height wise but keep a aspect ratio of a portrait picture.
Sub InsertPicture1()
Dim myPicture As Variant
myPicture = Application.GetOpenFilename _
("Pictures (*.gif; *.jpg; *.bmp; *.tif),*.gif; *.jpg; *.bmp; *.tif", , "Select Picture to Import")
If myPicture = False Then Exit Sub
Application.ScreenUpdating = False
[Code] ........
Is there anyway to use Excel to determine which of a set of numbers equals a total? I encounter this issue when dealing with accounts receivable. We receive payments with no details on what is being paid. I have a list of open items and a total being paid. I would like to have Excel determine which combination of invoices can be added together to match the payment.
View 4 Replies View RelatedI'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
[Code] .....
I can’t seem to work out the formula for calculating a ratio using the data in the pivot table.
I’ve added a column next to the pivot table to work out the ratio between to columns.
=SUM(B11/C11)
But what if there is no data in cell (B11), I want to return a “ “ (blank space)… but it returns a #DIV/0!
If I have 1,000 entries in a column is there an easy way to determine the number of times a certain item is in the columns. For example if field A1 is "qwerty" I wan to see how many times "qwerty" or field A1 appears in the entire column?
View 2 Replies View Relatedpivot table?
Is there a Color Function type vba code that can give me the color integer? I have one that can do that for cells that I've manually colored but I can't find a code that works on conditionally formatted cells.
I am trying to create a spreadsheet to calculate the macro nutrient ratio of foods based on carbohydrates, proteins, and fats and how many units/servings I eat of each. I've attached the file I've started. It's fairly straightforward and simple, thus far.
I would like to be able to associate a food with its various nutritional data in its row (fat, carbs, sugar, fiber, sat. fats, protein.. etc.). With all of my food items entered, I would like to be able to choose from a list, have it prompt me for how many units I've eaten then plug it into my formula to calculate totals and ratios.. The final flow should go soemthing like this...
1. Select a food from a list (each food on the list has its associated characteristics)..
2. Select how much ( each food will have an associated serving size i.e. 1/2 cup, 1oz..) ---- (4) oz VS. entering each unit in A1
3. Make these totals of each characteristic feed into my final chart with which to track and graph.
I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.
View 2 Replies View RelatedI have added 3 tables data .. also I had created a sample solution calc for emp1 and project1 ... I need to calculation the ratio between the months based on the working days and allocate the efforts accordingly.
View 2 Replies View RelatedTrying to manipulate a macro I recorded to be slightly more dynamic with some VBA code. The macro has saved me a lot of time however each month I have to re-do it due to the date changing and I'm sure there must be an easy way to adapt the below code.
Current Code (it repeats afterwards as there are lots and lots of sheets I need to perform the action on).
Windows("Raw Data.xls").Activate
ActiveWindow.DisplayWorkbookTabs = True
Sheets("Calls").Select
Range("C43").Select
Selection.Copy
Windows("Volume Tracking.xlsm").Activate
Sheets("Offline").Select
Range("AE33").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
What I'm after is a way to alter the range highlighted based upon matching a cell in "Raw Data.xls' and a cell in "Volume Tracking.xlsm".
The cell A43 in "Raw Data.xls" contains a month (which changes every month); if the month is Jan then I would want the Range to remain as AE33. If it's Feb then I would want the Range to be AF33 (and so on).
In "Volume Tracking.xlsm" I have the months in cells AE4 (Jan), AE5 (Feb) etc.
Is there a way to locate the column in "Volume Tracking.xlsm" on row 4 that contains the value found in A43 in "Raw Data.xls" and then paste what was copied out of "Raw Data.xls" C43 and paste it in to row 33 of the correct column that holds the matching month?
If not could I add code to say if cell A43 in "Raw Data.xls" = Jan then paste to AE33, if Feb then paste to AF33 and so on.........
Excel 2007
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........