Excel 2010 :: Keystroke To Select Variable Name From Dropdown List?
Jan 23, 2013
I've defined a number of variables in my spreadsheet. When I want to use one I type "=variablename" and 'm presented with a list menu.jpg
In the above example, I have several variables starting with the word "Harvard" (a town, not the university :-)
How do I select one of these without having to double click with the mouse.
Up and down arrows allow me to highlight an item but I cannot find a keystroke that allows me to select the highlighted item. Instead I have to lift my hand off the keyboard and use the mouse.
I am trying to create a macro using the recorder that will select the latest date in a drop down list. The dates upate each day in the pivot table after the table is earlier refreshed. Using the recorder simply picks the same date each time. I want it to select the latest date. Am using Excel 2010 and have some very limited experience in vba for editing macros.
My Excel 2007 has "auto complete with a drop down list". When I type in the first character, a drop down list appears listing all the entries in that column tha start with that character. I click on one of the entries and the cell is "auto completed" with that entry. Sure is handy. I try to find that functionally in Excell at work, Office Professional 2010, and no bueno for kaki.
I'm trying to create a set of three dynamic/dependent drop down lists of date values, based on a set of imported data. Depending on whether the preferred choice is to list all dates in a range or just dates on the 15th, the available start and end drop down lists will change.
In addition, if possible I would then like to display a list of valid dates (not sure if this needs to be VBA).
The attached sheet shows/explains what I am attempting but here it is as well:
If B3 is set to show all dates in the month then:
the first dropdown option for C3 will be the first date of IMPORT (D2) the first dropdown option for C4 will be the C3 value, to the last date in IMPORT (D) column
If B3 is set to show 15th of the month then:
the dropdown for C3 will be the first date of IMPORT (D) column with a date of 15th the dropdown for C4 will be in the range of C3 to the last date of IMPORT (D) column with a date of 15th only dates of 15th will be listed in both C3 and C4 dropdownlists
General
the dates in IMPORT column D are taken from IMPORT column A, B & C, which will be imported and will always be date sequential the number of rows of date entries will change with every import but there will never be any blank rows between dates the values in IMPORT columns A, B & C will always be numerical, and can be referenced if required [ideally] the LIST OF DATES will be populated with the date range, based on the option selected in B3
I'm fairly familiar with Excel (2010) and I have also done some VBA but I'm new to dynamic, nested dropdown lists and I'm unsure what the most practical way is to achieve this.
I am using windows 7, excel 2010 I have a work book, my price list is sheet one and my list of customers and what discounts they get per item in sheet 2.
I choose customer on sheet 1, say i choose a & L sales, well on sheet 2 it shows they get a discount of 45 percent. so I want the 45 percent to show in cell 4r on sheet one, but if the dropdown box shows customer a & V it should show 35 percent because that is what it is on sheet two in cell 3c.
sheet two has 158 customers and each get a difference discount for that product
Creating a spreadsheet in Excel 2010 and am creating the dropdowns from a separate sheet in the workbook. There are no spaces and I don't know why I keep getting the "The Source currently evaluates to an error."
I am entering the Data Validation to reference the first cell I need "=INDIRECT(H3)"
I have put the spreadsheet on dropbox. When you select the "Sequencing Platform" drop down, it need to give just the dropdown for the platform selected.
How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12 Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
I am looking to insert a drop down box in Excel 2010 which will allow users to select multiple items. At the moment I have data validation drop down lists in other columns, however I need one column to allow for multiple selections.
Basically I have a drop down which allows for a region to be selected, my next drop down (in the next column) I need to allow users to either select "ALL", or multiple countries which fall within the region selected previously. I need a check box so that users can select multiple countries, and deselect if an incorrect country is selected in error.
I'm using Excel 2010. I have developed a calculator (attached) to make life easier for my colleagues. It works perfectly fine. But one thing keeps bugging me.
In Cell C3 - You have the option to choose "Daily" or "Weekly" (Drop Down). This selection effects your selection for Cell C6.
If you choose Daily in Cell C3 then your options for Cell C6 are restricted to select/enter an amount between £0.00 and £6.00.
If you choose Weekly in Cell C3 then your options for Cell C6 are restricted to select/enter either £0.00 or £12.00.
This works perfect.
However, if I select "Weekly" and then select " £12.00", all my results are perfect which is exactly what I want BUT if I then go back up to C3 and change "Weekly" to "Daily", the £12.00 in C6 remains (though the data validation for "Daily" is restricted to £0.00- £6.00) and all the results are consequently wrong until C6 is changed.
The obvious thing is to delete the £12.00 from Cell C6 or introduce a "clear" button BUT I don't want my colleagues to do this as it leaves the possibility of error and since we are dealing with money, I can't have it.
So what I would love and what would complete this calculator and deem it ready is if every time Cell C3 is selected (i.e. from the drop down list you choose Weekly or Daily) it as a result resets Cell C6 to £0.00.
I want (using keystrokes only) to Save As my workbook with the data in a certain cell. However, when I select this cell, and then ctrl + c, it copies the cell (not just the data inside), and so it doesn't let me paste this as the name of the document. Does anyone know how to use keystrokes to highlight the data itself in a selected cell.
I have a userform with 3 option buttons. Each buttin is set to display another userform.
Private Sub OptionButton1_Click() Userform1.Show End Sub Private Sub OptionButton2_Click() Userform2.show End Sub Private Sub OptionButton3_Click() Userform3.Show End Sub Private Sub UserForm_Click()
End Sub
Right now the form is running perfectly. If I select an option with the mouse the correct form shows right up. The issue I have is that, the excel file will be running on a computer that will have no mouse. It will be using a barcode reader as its primary input source. What i would like to do is have the user swipe a 1,2 or 3 will the barcode reader or keypad.
Im trying to organize a tools inventory list. Its supposed to be sort of like an order sheet for each department. But what I want to do is when I select either CARPENTRY, or any of the other trades from a drop-down list, I'll be able to select from another drop-down list items associated with that trade in particular. So eventually I want the master data hidden, preferably in another sheet. I searched all of Google but it seems a bit complicated to get it done. I've attached the sheet so that you can see what I'm talking about. MOVE IN MASTER LIST.xlsx
I have a drop down list that is dependant on another drop down list, all this works fine, however if the user changes the first drop down list the second still continues to display the last option chosen by the user, is there a way to make the 2nd drop down list display "Please Use Drop Down List To Select An Option" instead, also is it also possible to do this without code?
What I want to do is select other options in IE html drop down list. But somehow the other methods I read online doesn't work with my situation. I got either "Variable or Block Variable not set yet" or "Property or Method doesn't apply" errors. The following is the VBA code I have so far:
In cell B4 I have data validation drop down list which refers to the range of values named Tarifalist. Tarifalist list has the following range of values: 01,1A-1F / DAC / 02 / OM / HM / 5A (Baja) / 5 (Baja) / 03
In cell B5 I have a data validation drop down list with =IF(OR($B$4="03",$B$4="OM",$B$4="HM"),Thirty,ThirtySixty) Where range Thirty has the value 30, and ThirtySixty has values 30 and 60
I would like in addition, a Macro which when either 03, HM, or OM is selected in cell B4, that it automatically sets the value to 30 in cell B5. The purpose is so that the input is foolproof, and no user can accidentally leave the value at 60. As of now, if the value has been left at 60, and 03, HM, or OM is selected in B4, B5 can stay at 60, which is not a valid input and must be manually changed.
I have two cells and both have a drop down list. I would like Excel to automatically select an item from the second drop-down list based on the manual selection of the first drop-down list. The second cell needs the have the dependent item appear in the second cell not just be available in the drop-down list.
For example, Cell A1 has a drop-down lsit of the names of fruits, vegetables and flowers (apples, bananas, carrots, carnations, corn, daisys, tomatoes, zuchinni). Cell B1 has another drop down with three items (fruits, vegetables & flowers) which needs to be dependent on the first list. Further, I would like cell B1 to automatically select the appropriate item.
For example, if "carrots" is selected in cell A1 then I would like "vegetables" to be selected and automatically appear in cell B1. If "carnations" is selected in cell A1 then I would like "flowers" to appear (not just be available in the drop down).
I have a list of asset numbers that I am displaying to a user. I have a cell where the user is to type in the asset number. What I would like is to be able to display a list of matches in another group of cells.
I.e. - if the cell is populated with "D49", the list on the right will contain all asset numbers starting with "D49"...
I can do this easily enough if I wait for the "Change" event on the worksheet - but this necessitates the user typing some in, hitting enter, etcetera.
Is there any way to trigger an event per keystroke instead of on worksheet.change?
How do i make a drop down list in a cell show Select One in the cell when the cells previous contence (Option selected from drop down list) have been deleted. E.g Cell E5:E400 must show Select One in the cell and when clicked on show drop down list I dont want a input message box or error box i can do that with validation
I have a sheet with a data in range A1:J9. I have a drop down list in each cell from A2:A100.
I'm trying to store all values in A1:J9 in an array using the property CurrentRegion.value like below
Code: Arr=Range("A1").CurrentRegion.Value The issue is that is taking as current region the range A1:J100, even if I don't have selected any value in the drop down list from A10:A100.
Is there a way to force CurrentRegion to select only values from A1:J9 ignoring the blanks dropdown list values or a similar way to load an array with values in a contiguous range?
I have a spreadsheet where user can search for information inside a search box and the appropriate rows are returned using formulas.
I have a drop down list (Category: Model) in the search box as well as a search field (Category: Program, cell D2). Underneath the search box, search rows are returned with column categories: Program, Model, etc.
What I require is that if a user enters the specific program into the search field D2, then the dropdown list would automatically choose which model that program belongs to based on the returned row.
For example, if I typed "engine" into D2 and pressed enter,
Under the records section (Row 14 and beyond), the following record will pop up:
Program Model Indicators
Engine F-16 3a
Based on the record, F-16 would be chosen from the dropdown list. Is there any way this can be done?
I have a validation list drop down box set up to reference data in a defined name list. I would like to be able to select multiple values from this list to appear in one cell (preferably separated by a comma). For example, the defined name list contains the following data:
Choice 1 Choice 2 Choice 3 Choice 4
I would like to be able to populate one cell with the following via the drop down list: Choice2, Choice 4
I am using Excel 2010 .I have set up Data validation for a dropdown box so I can select from a list of items. In the old versions of Excel the actual drop down arrow used to appear in each cell. In the version I have, the drop down arrow only appears when you select the actual cell. When I did the validation I checked the " In-Cell Dropdown", but it still doesnt put the arrow in the cell. Is this functionality available in Excel 2010 ?
My second issue is a formula.
The last name is in a list of items and users have to select Yes or No to theitems on the list. I am wanting to create another spreadsheet that automatically populates based on their responses.
In short, I want to be able to set up a rule or formula that states if the answer in column A is "y" then I need the information in column B to be displayed.
The ultimate aim is to get a automatic sub set, (in another tab), of the orginal information based on users responses.
Using excel 2010, how do you insert a drop down calendar? Will this be able to display the date and then can I add a nuber to it and the result be a date
I'm running Windows XP with Excel 2010. I would like to be able to have a group of 19 boxes of which each box has a unique entry, ie 1, 3B, 5C etc. Each box I'd like to have a way in which when selected only the single or dual unique characters show as a color. See attached spreadsheet with sample. When a cell with lets say 1 is selected, a drop box appears and the color and description are shown. Select a color but only show the 1 and the color selected, leaving behind the description. How can I do this for all 19 boxes. This seems like its a classic conditional format. Unfortunately it appears to be several orders of difficulty than a normal conditional format.
I'm trying to add a sorting filter dropdown on some columns in a sheet. If I select the column, then use Data -> Filter, it adds the filter. on that column. But then, if I select another column, the "Filter" button in the tool menu is already selected, even though there is no filter for that column. If I click it, the filter on the other column disappears. Then, clicking it again adds a filter for every single column. It seems I'm not able to select f.ex. 3 different columns and add a filter to only those. It's either all or none. Is this how it's supposed to work?
I have seen in a number of spreadsheets that you can create a drop down list using data validation that hides certain columns depending on what you select. this leads me on to my question...
I have created a Gantt chart for an entire year and what to put a drop down box in C1 that contains four selections (Q1, Q2, Q3, Q4) to represent the four quarters of the year. I want to work it so that when the user selects Q1 it hides the columns where the other Quarters of the year are kept so you can only see that quarter.
If that is possible I would then like a second drop down box that allows the user to select a specific week.
I am currently working on a workbook for work. It is a basic input output sheet. I have data from work that i copy and paste into sheet 1 and I have it arranged into sheet 2.
I am using windows 7 with Excel 2010, though needs to be compatible with 2007 using XP.
What I am trying to implement. I would have a drop down box in cell AD-4 with the current list
Select Week 1 Week 2 Week 3 Week 4
What I want to implement is a code that if I select "week 1" from drop down then it will hide the entire row if data in column B = week 2, week 3, week 4, week 6
also
If week 2 is selected then hide entire row if column b = week 3 , week 4, week 5
so basically hide the weeks that are after the current selected week.
In addition to this I would also like to hide the entire row, regardless of drop down selection if data from J, K and O all = 0 or (blank).
(the first row is the current Row labels, I have a lot of current hidden columns).
A B J K O
Supervisor Name Agent Name Needs Complete Completed w/o Turn in Needs Turn In
