Excel 2010 :: Links Not Working For End Users

Jul 12, 2013

I am using Excel 2010 on Windows 7.

I copied (with 'Paste Link') rows from a master Excel file to a file that performs calculations. This file (and many others like it) need to be modifed by other people. My tester has informed me that the data is not updating between the files for her, although it does work for me.

When I check 'Data->Edit Links' it shows the status of the file as 'unknown'. If I click 'Check status' it is then OK, but the next time I look at it, it has reverted to 'unknown'.

1. How do I get the status to remain at OK?

2. Why do the links work for me, but not for my end users?

View 2 Replies


ADVERTISEMENT

Edit Links - Break Links Not Working?

Jun 22, 2012

I have an unwanted link and I can't remove it. I have tried through the Edit Links dialog box, searched for [ in formulas throughout the workbook and gone searching manually for the reference but to no avail.

View 9 Replies View Related

Excel 2010 :: Breaking Data Links To Another Workbook

Oct 18, 2012

I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.

View 3 Replies View Related

Excel 2010 :: Update Links By Referencing A Cell Value?

Feb 12, 2014

Windows 8.1, Excel 2010. I have this code that updates the links. I use it in various workbooks, but they are all going to the same document; "Data Master (QC"

ThisWorkbook.UpdateLink Name:=ThisWorkbook.LinkSources

When I change computers, I have to manually tell each document where to fine the linked document. I want the documents being linked to look for the file path in a designated cell, i.e Cell E3 = "C:UsersOwnerDocuments1-QCDataData Master (QC).xlsm".

Something like ThisWorkbook.UpdateLink Name:=ThisWorkbook.Range("E3").Value

View 1 Replies View Related

Excel 2010 :: Create A Sheet Which Captures The Worked Hours For Users In Various Cells?

Apr 1, 2014

I am trying to create a sheet which captures the Worked hrs for users in various cells. The SUMPRODUCT does not seem to be working for me .

Attached is the sample sheet which i would like to get the SUM using SUMPRODUCT.

Col D under Data Sheet has the names and these are repetitive. The Hrs / min in column E & F (Regular Hrs) & Additional Hrs / min under H & I.

I would like to have the Regular hrs + minutes to SUM up against each individual and displayed in consolidated under Col D (Regular hrs) & Col E (Additional Hrs).

I am using Excel 2010 and when i have used the same formulae in 2003 it worked. Not sure why it is not working in 2010.

View 2 Replies View Related

Excel 2010 :: Locate And Eliminate Links To External Sources Referenced By Worksheet

Feb 15, 2013

Upon opening after "Enable" is selected the workbook attempts to locate several nonexistent pieces of data, either internet based files or network based files. Requested data appears to be about 11 years old and would not be applicable it located.

Edit Links shows the location of the requested files, i.e., E:filename but does not show the location within the document that causes this request. A search for "E:" does not locate text in any worksheets.

The question is how to delete or turn off this problem which slows opening, saving, and recalculation of a large multiple worksheet workbook.

View 1 Replies View Related

Excel 2010 :: Template Only Has 5 Working Days In It?

Apr 8, 2013

I am using Excel 2010. The template only has 5 working days in it, but I need to set 6 working days (Saturday is also working day). Wondering, how to get this working without spoiling the functions. Also the date format is in US , need to change to UK without disrupting the Formula/Functions.

View 12 Replies View Related

Excel 2010 :: Generate GetPivotData Not Working?

Dec 10, 2012

In Excel 2010, I can manually enter the GetPivotData function (and it works), but with Generate GetPivotData selected / enabled (in PivotTable Tools --> Options --> PivotTable --> Options), the GetPivotData function isn't automatically generated.

View 1 Replies View Related

Excel 2010 :: Macros Not Working In Windows 7

Apr 29, 2014

I have a macro to collate data from multiple workbooks to a single sheet. The folder path to the source files can be chosen thorugh the macro. It runs perfectly in my system running on Windows XP. But it doesnt run on Wondows 7 system. Both are using MS Excel 2010. In Windows 7 system, while choosing the folder path where source files are located, it says "No items match your search" (screenshot attached). I would want the macro modified so that it runs on any platform. The macros that I'm using is given below:

[Code] .....

Untitled.png‎

View 10 Replies View Related

Excel 2010 :: Filter - Sort Not Working?

Oct 24, 2011

I have a filter on the Qty column but when I sort Z -A or A - Z it does not work. I have tried formatting as number but no success, I have never seen this before, why the sort wont work? I am using Excel 2010 in Win 7

View 5 Replies View Related

Excel 2010 :: Sumifs Formula Not Working?

Jun 10, 2013

I have a workbook with multiple tabs that I update every other month with current data. I have one tab for data that I clear each time and copy the updated info into. (That info is copied from another excel spreadsheet, by the way.) On the second tab I have sumifs formulas set up to pull in certain data from the data tab. This setup has worked perfectly until today. I copied my data into the one tab but could not get the formulas to calculate. It looks like the formulas aren't picking up the data. I've checked to make sure the formulas are calculating automatically. I've retyped the formula. I've replaced the =. I tried naming the ranges I wanted the data to be picked up from. I've tried changing the format of the data - general, text, numbers, etc. I'm working in excel 2010

View 2 Replies View Related

Excel 2010 :: Insert Macro Not Working

Sep 20, 2013

I am using this macro below to paste pictures from a folder. This works perfect when run on excel 2007, however it only links image when this is run on excel 2010. How to eliminate the error.

Option Explicit
Sub alex_it_saving_lives()

'get the image folder path
Dim strImagePath As String
strImagePath = GetImageFolderPath
If (Len(strImagePath) = 0) Then

[Code] .........

View 3 Replies View Related

Excel 2010 :: After Argument In Find Not Working

Dec 12, 2013

In an Excel Pro Plus 2010 workbook on a Windows 7 PC, trying to use the "After" argument in a VBA .Find function and it's not working as expected.

I've got the following data in column D:

Row1: Title
Row2: Row2Data
Row3: Row3Data

And using this simple procedure:

Sub FindTest()
If Range("D:D").Find("Title", After:=Range("D1")) Is Nothing Then
Debug.Print "Not Found"
Else
Debug.Print Range("D:D").Find("Title", After:=Range("D1")).Row
End If
End Sub

My expecation is that "Not Found"will be returned, but instead I'm getting the row # (1).

If I change the value in D1 the procudure returns "Not Found", as expected.
If I change the find argument to look for "Row2Data" it returns 2.

I also tried changing the "After" argument to "D2" ... same result.

Finally, I tried using this format: "Range("D:D").Find("Title", [D2])" and got the same result.

View 2 Replies View Related

Excel 2010 :: Countif Formula Not Working?

Jun 25, 2014

In excel 2010, I have 2 spreadsheets, the first "Active Total Master Turn" has the data, the second, "Pending" has a reporting chart. A cell on "Pending" contains the following formula:

=COUNTIFS('Active Total Master Turn'!F:F,"RK*",'Active Total Master Turn'!H:H,"Painting",'Active Total Master Turn'!C:C,"

View 7 Replies View Related

Excel 2010 :: Default File Location Not Working?

Apr 19, 2013

I'm using Excel 2010. When I go into the Excel Options, to the Save option and try to type in a specific network drive in the Default File Location: box, I click OK and then it doesn't save the changes. I close Excel down all the way and then restart a new Excel session and it keeps going back to "LibrariesDocuments..."

It doesn't seem to be just related to Excel...having the same issue in Word and Access 2010 as well.

View 3 Replies View Related

Excel 2010 :: Hyperlinks Not Working When Spreadsheet Moved

Oct 17, 2013

Using MS Excel 2010.

As I understand it hyperlinks set in a spreadsheet should work regardless of where you save and/or copy the spreadsheet i.e. as long as the directory location of the location / file the hyperlink is referencing doesn't change (notwithstanding, the user must have appropriate access rights to the relevant directory locations)

However, the situation I have is the spreadsheet was generated and saved to directory location A (intention being this would be the 'master' yearly template) and the hyperlinks set, all of which work when you open the spreadsheet in this directory location. But when I copy the spreadsheet to directory location B, which is intended to be the yearly 'register' location for the spreadsheet, none of the hyperlinks work? When I hold my cursor over a link in the copied spreadsheet, in directory B, I do not get a 'pop-up' path like I do in directory A and when I click a link I get an error message:

Microsoft Excel The address of this site is not valid. Check the address and try again.

As stated above the documents the hyperlinks relate to have not moved, they remain in the same template directory (i.e. the link path has not altered).

View 1 Replies View Related

Excel 2010 :: VBA Save AS (word Document) Not Working

Nov 8, 2012

I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.

This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).

Code:

Dim myDoc As Word.Document
Dim saveAsName as String

saveAsName = "some text here" + ".doc"

myDoc.Save

myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument

View 9 Replies View Related

Excel 2010 :: Dynamic Range Not Working Properly

Jan 8, 2013

Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.

=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))

View 2 Replies View Related

Excel 2010 :: Stopped Working When Building Charts?

Jan 15, 2013

I'm working on a macro that does the following:

1. Pull data from the internet
2. Perform calculations on the data
3. Graph the calculated values

- As I run the macro, Excel dies in step 3, where I graph the calculated values.
- It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts
- I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area
- It works perfectly fine when I step through using F8
- I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait
- Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:

I'm running Windows 7, Office 2010

Code:
'Chart variables
Sheets("Summary").Select
Dim ChartRange As Range

[Code]....

View 4 Replies View Related

Excel 2010 :: Report Filter For Pivot Not Working With VBA?

Apr 5, 2013

I have a pivot table that I want to update via VBA based on dates user inputs on an input tab. (Want to use the Between function)

The Date field is in the Report Filter section (as I don't want it in the row or column area), but when I click on the dropdown arrow, I don't get any option to filter the date at all. I've double checked that the dates in my datasource are formatted for a pivot table, but that doesn't seem to be the issue.

When I use code I've found on this and other sites, it also doesn't work. When I run it, I get the following error at the "If Date DateValue(PI.Name) < StartDate Or DateValue(PI.Name) > EndDate Then..." line

Error Message: Unable to set the Visable Property of the Pivot Item Class

Code:
Sub Test()
Const StartDate As Date = #1/15/2013#
Const EndDate As Date = #2/13/2013#

[Code]....

View 9 Replies View Related

Excel 2010 :: Counting Users Per Hour For Each Hour

Oct 21, 2013

I work in a computer lab and we have to keep track of how many people sign in (using excel 2010), and how long they were here.

I'm looking for a way to count how many entries were made per hour for every hour someone was signed in.

For example someone signs in at 9:22 am and leaves at 3:34 pm.They were here from 9-10, 10-11, 11-12 etc.. and its getting very tiresome to go through and manually enter a "1" for each individual hour in each cell under the hour.

Is there a way I can feed the in and out times into a spreadsheet and have it automatically count how many people were in the lab each hour?

A
B
C
D
E

1
2
4
2

2
In
Out
8 am
9 am
10 am

[Code] ...........

View 3 Replies View Related

Excel 2010 :: Command Button In Shared Workbook Not Working?

Sep 7, 2010

I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.

I have no problems with the button when opening the shared form in 2003 or 2007.

Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?

View 4 Replies View Related

Excel 2010 :: Application Visible And Display Alerts Not Working

Nov 23, 2011

I am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.

The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.

Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True

I have seen the similar progress indicator during the "Save" event too. How to hide this?

View 3 Replies View Related

Conditional Formatting Working For Some Users And Not Others

Oct 27, 2011

I have set up a basic sheet for a colleague, whereby the Team Leader can enter client names into a control sheet, and then the team can add the client names into the allocations sheet when they take on the care for that client, and Conditional Formatting colour codes the cells to show which program a client comes under.

My problem is, the conditional formatting works perfectly on my computer, and another colleague's computer, but for two other colleagues, only half of the colour coding works... leaving half of the clients cells white, indicating they are not allocated to a program.

I have checked that we are all using the same network pathway, macro security settings etc.

View 3 Replies View Related

Excel 2010 :: Icon Conditional Formatting Not Working When Formula Present In Active Cell?

Mar 20, 2014

I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.

View 3 Replies View Related

Links Within Workbook Not Working

Nov 18, 2008

I have a workbook with a ton of links to other tabs, but all links and tabs are within the workbook (none to other documents). I've found that a lot of the links are no longer working. This document is only a month old, so it's not outdated or anything. i find myself having to go back and re-link everything. This is a big file...i understand if i have to re-link everything once, but i'm worried that the links will "break" again.

does anyone know why these links within a workbook are not working? is it something i have to fix in the Options?

View 9 Replies View Related

Allow Users To Edit Ranges Not Working After Running Macro?

Feb 14, 2013

I have a sheet that I have added protection to (Tools / Protection / Protect Sheet) with a password (PostItNote). Before I protect the sheet I have allowed users to edit ranges (Tools / Protection / Allow Users To Edit Ranges). I have made my selection of the cells that users are allowed to edit and protected the sheet. I now want to run a macro that will un-protect the sheet (in order to allow the macro to edit the protected cells) make some changes and then re-protect the sheet. The macro runs as it should do but when it stops I am unable to edit the cells that I allowed users to edit? For some reason the areas that I enabled users to edit have been changed allowing users to only edit far less cells that I originally set!

Here is my macro code that I am running:

[Code] ......

View 2 Replies View Related

Links To CSV Files, Find And Replace Not Working

Apr 9, 2009

I have a large spreadsheet that has links to CSV files. Every month I need to create a new folder and put the CSV files into that folder, all the CSV files from month to month have the same name for each worksheet.

I'm trying to do Find and replace on the Folder name within the links to change say, February to March so I can just add the CSV files for each month and the spreadsheet will link to the new CSV file in the folder.

I have even tried adding all the February CSV's to the March folder so that when I overwrite the CSV's it will update the master spreadsheet, but it keeps asking me where to look for the folder.
Here is an example of a link:

='\FileservermsbilBRANCH REPORTSBM ReportsFebruary[TItemToDispense@40186 Export Dispensed Item Data-00.CSV]TItemToDispense@40186 Export Di'!BM2

As you can see the folder is named February within the link and I need to replace it with March.

View 9 Replies View Related

Excel 2010 :: VBA Code To Extract HTML Source Code Not Working On Google Sites

Dec 6, 2012

I have previously used the following code to successfully pull out IE webpage source code for string manipulation.

Its a crude example to demonstrate the principle:

Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True

[Code] ......

However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"

The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......

The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.

Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?

Using :
MS Excel 2010
IE Explorer 8.0

View 1 Replies View Related

Macros That Were Working In Excel 2003 Are Not Working In 2007

Jan 25, 2010

I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.

Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved