In Excel 2010, I can manually enter the GetPivotData function (and it works), but with Generate GetPivotData selected / enabled (in PivotTable Tools --> Options --> PivotTable --> Options), the GetPivotData function isn't automatically generated.
View 1 Replies
How to generate barcode labels in excel? I would like to have them ready for use (without "demo" or any similar text on them).
View 2 Replies View RelatedI need to generate conditional formatting in Excel 2010.
For the planned date of material submittable should turn yellow before 10 days ago & planned date of material submittable should turn Red when overdue.
How can I create a Makro that looks for values (e.g. values > 90) and that then generates a list with: all the values greater than 90, the row names and column names of the values?
I am pretty sure I will need a Makro for this, but how to create it. I am using excel 2010.
I have attached a file to give you an example. The red table is the table with the values. The blue table is what I want to be generated automatically. In the example I did it manually.
Workbook1.xlsx
How do I create a 6 digit unique random number for use as an ID in column A. Once created the rows with preexisting 6 digit unique random ID numbers must not change every time new rows are added.
View 9 Replies View RelatedI have an Excel 2010 spreadsheet that I am using to save several numbers all in the same column. These numbers can range from the several thousands up to billions. The formatting I am using for these numbers is Number (using 1000s separator).
number_forma.png
I am also using the spreadsheet to generate a text string for each of the numbers. I don't want the text string to show the number as it is, I want to shorten the number by only showing the first few digits followed by a "B" for billion, "M" for million, or "K" for thousand. For example, in the text string I want to show 1,600,000 as 1.6B.
In order to shorten the number I use the cell in the column to the right of each number. This cell uses the following custom formatting (which I found by doing a Google search): [>999999999.999]#.0,,,"B";[>999999.999]#,,"M";#,"K";
custom_format.png
As you can see the formatting is quite complex (at least for me it is) but it does what I want it to do.
Here is a screenshot of what the original and custom formatted cells look like:
custom_formatted_cells.png
As you can see the custom formatting works and does exactly what I wan
The next column (after the custom formatted number) is where I put the generated text string for each of the numbers. As I stated above, I want the generated text to use the shortened version of the number (e.g. 1.6B).
To generate the text I use the CONCATENATE function with a reference to the cell containing the shortened number as one of the arguments. For example:
CONCATENATE("SOME STRING ", B1)
Where B1 is the custom formatted cell.
The problem I am running into is, the text that gets generated doesn't show the shortened format of the number, it shows the full number. Here is a screenshot demonstrating what is happening:
concatenate_formula.png
As you can see the generated text is "SOME STRING 1600000000". This is not what I want. I want the generated text to be "SOME STRING 1.6B".
I think I understand what's going on. When the CONCATENATE function references a cell it takes the actual value of the cell and ignores any formatting. (I suppose formatting is just the way you see the data, not how underlying functions receive the data.)
My question is, how can I re-write the CONCATENATE function (or use another function, etc. available to me) to use the formatted version of the cell?
*UPDATE* I have attached my spreadsheet as an attachment to this post (tackyjan_excelforums.xlsx). Please note that it was created and saved using Excel 2010.
I am using Excel 2010. The template only has 5 working days in it, but I need to set 6 working days (Saturday is also working day). Wondering, how to get this working without spoiling the functions. Also the date format is in US , need to change to UK without disrupting the Formula/Functions.
View 12 Replies View RelatedI am using Excel 2010 on Windows 7.
I copied (with 'Paste Link') rows from a master Excel file to a file that performs calculations. This file (and many others like it) need to be modifed by other people. My tester has informed me that the data is not updating between the files for her, although it does work for me.
When I check 'Data->Edit Links' it shows the status of the file as 'unknown'. If I click 'Check status' it is then OK, but the next time I look at it, it has reverted to 'unknown'.
1. How do I get the status to remain at OK?
2. Why do the links work for me, but not for my end users?
I have a macro to collate data from multiple workbooks to a single sheet. The folder path to the source files can be chosen thorugh the macro. It runs perfectly in my system running on Windows XP. But it doesnt run on Wondows 7 system. Both are using MS Excel 2010. In Windows 7 system, while choosing the folder path where source files are located, it says "No items match your search" (screenshot attached). I would want the macro modified so that it runs on any platform. The macros that I'm using is given below:
[Code] .....
Untitled.png
I have a filter on the Qty column but when I sort Z -A or A - Z it does not work. I have tried formatting as number but no success, I have never seen this before, why the sort wont work? I am using Excel 2010 in Win 7
View 5 Replies View RelatedI have a workbook with multiple tabs that I update every other month with current data. I have one tab for data that I clear each time and copy the updated info into. (That info is copied from another excel spreadsheet, by the way.) On the second tab I have sumifs formulas set up to pull in certain data from the data tab. This setup has worked perfectly until today. I copied my data into the one tab but could not get the formulas to calculate. It looks like the formulas aren't picking up the data. I've checked to make sure the formulas are calculating automatically. I've retyped the formula. I've replaced the =. I tried naming the ranges I wanted the data to be picked up from. I've tried changing the format of the data - general, text, numbers, etc. I'm working in excel 2010
View 2 Replies View RelatedI am using this macro below to paste pictures from a folder. This works perfect when run on excel 2007, however it only links image when this is run on excel 2010. How to eliminate the error.
Option Explicit
Sub alex_it_saving_lives()
'get the image folder path
Dim strImagePath As String
strImagePath = GetImageFolderPath
If (Len(strImagePath) = 0) Then
[Code] .........
In an Excel Pro Plus 2010 workbook on a Windows 7 PC, trying to use the "After" argument in a VBA .Find function and it's not working as expected.
I've got the following data in column D:
Row1: Title
Row2: Row2Data
Row3: Row3Data
And using this simple procedure:
Sub FindTest()
If Range("D:D").Find("Title", After:=Range("D1")) Is Nothing Then
Debug.Print "Not Found"
Else
Debug.Print Range("D:D").Find("Title", After:=Range("D1")).Row
End If
End Sub
My expecation is that "Not Found"will be returned, but instead I'm getting the row # (1).
If I change the value in D1 the procudure returns "Not Found", as expected.
If I change the find argument to look for "Row2Data" it returns 2.
I also tried changing the "After" argument to "D2" ... same result.
Finally, I tried using this format: "Range("D:D").Find("Title", [D2])" and got the same result.
In excel 2010, I have 2 spreadsheets, the first "Active Total Master Turn" has the data, the second, "Pending" has a reporting chart. A cell on "Pending" contains the following formula:
=COUNTIFS('Active Total Master Turn'!F:F,"RK*",'Active Total Master Turn'!H:H,"Painting",'Active Total Master Turn'!C:C,"
I'm using Excel 2010. When I go into the Excel Options, to the Save option and try to type in a specific network drive in the Default File Location: box, I click OK and then it doesn't save the changes. I close Excel down all the way and then restart a new Excel session and it keeps going back to "LibrariesDocuments..."
It doesn't seem to be just related to Excel...having the same issue in Word and Access 2010 as well.
Using MS Excel 2010.
As I understand it hyperlinks set in a spreadsheet should work regardless of where you save and/or copy the spreadsheet i.e. as long as the directory location of the location / file the hyperlink is referencing doesn't change (notwithstanding, the user must have appropriate access rights to the relevant directory locations)
However, the situation I have is the spreadsheet was generated and saved to directory location A (intention being this would be the 'master' yearly template) and the hyperlinks set, all of which work when you open the spreadsheet in this directory location. But when I copy the spreadsheet to directory location B, which is intended to be the yearly 'register' location for the spreadsheet, none of the hyperlinks work? When I hold my cursor over a link in the copied spreadsheet, in directory B, I do not get a 'pop-up' path like I do in directory A and when I click a link I get an error message:
Microsoft Excel The address of this site is not valid. Check the address and try again.
As stated above the documents the hyperlinks relate to have not moved, they remain in the same template directory (i.e. the link path has not altered).
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.
=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))
I'm working on a macro that does the following:
1. Pull data from the internet
2. Perform calculations on the data
3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values.
- It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts
- I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area
- It works perfectly fine when I step through using F8
- I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait
- Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code:
'Chart variables
Sheets("Summary").Select
Dim ChartRange As Range
[Code]....
I have a pivot table that I want to update via VBA based on dates user inputs on an input tab. (Want to use the Between function)
The Date field is in the Report Filter section (as I don't want it in the row or column area), but when I click on the dropdown arrow, I don't get any option to filter the date at all. I've double checked that the dates in my datasource are formatted for a pivot table, but that doesn't seem to be the issue.
When I use code I've found on this and other sites, it also doesn't work. When I run it, I get the following error at the "If Date DateValue(PI.Name) < StartDate Or DateValue(PI.Name) > EndDate Then..." line
Error Message: Unable to set the Visable Property of the Pivot Item Class
Code:
Sub Test()
Const StartDate As Date = #1/15/2013#
Const EndDate As Date = #2/13/2013#
[Code]....
I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
I am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.
The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.
Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True
I have seen the similar progress indicator during the "Save" event too. How to hide this?
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies View RelatedI have previously used the following code to successfully pull out IE webpage source code for string manipulation.
Its a crude example to demonstrate the principle:
Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
[Code] ......
However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"
The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......
The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.
Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?
Using :
MS Excel 2010
IE Explorer 8.0
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I have a workbook that uses a index page that I created. It has lots of hyperlinks on it to route them to other sheets in the workbook. Each worksheet has a hyperlink to go back to the index page, and one to open an email. I have a user with 2010 now that is getting an error when clicking on the hyperlink. Error Message: "This Operation Has Been Canceled Due To Restrictions on the Computer. Contact Your Administrator."
View 3 Replies View RelatedAs you can see I have only one attached file which has a two sheet tab, one is the "DATALIST" and the other is "FORM" in which this tab will be the one to be generated with blank highlighted yellow, and get data from datalist tab.....
View 4 Replies View RelatedI'm using creating a spreadsheet where data inserted into Sheet 1, is used to fill the blanks in a letter in Sheet 2. The formatting is all fine and I've managed to get it working with the data coming through to the correct place.
However there is the issue that parts of the letter are not always applicable to all people. Is there a way I can create a formula that say hides a paragraph of the letter (or a row/cell to be more precise) if a certain value is 'true'? Would need to be done in a way that allows cells beneath the hidden ones to move upwards so there are no large gaps when printing the letter.
I am looking for Excel to auto generate an email (to myself) when the following happens:
Basically, I have products with promotions which each have a start and end date. I have an excel sheet which we manually enter the promotions start and end dates into. I have a seperate column which has a basic formula to indicate the days remaining until the promotion comes to an end.
I would like excel to automatically send me an email to notify me when the promotion is due to end one week in advance.
So I will have a column which effectively shows the days remaining (number) until the promotion ends, when this number hits 7, I would like the email to be sent to myself stating (Model number XYZ. Promo ending soon).
I'm struggling to get the "getpivotdata" function working correctly.Sample book attached.
I'm trying to return the data that is held within the pivot table to a separate part of the sheet.In column D I have week numbers and in column E the qty(which is currently empty) How do I return the qty in column E from the data in the pivot table (column B) relative to the respective week numbers.
