Code:
For Each clsName In Array("Africa", "Europe", "Asia")
If I have the above array values in the named range _lstRgns in Sheet 1 of my workbook, how would I write the code to pick this up?
The named range is expandable, as it is an offset formula in the name manager.
clsName is the name of my defined array in my code
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
Im using excel 2010 As it's 60 times quicker I was trying to speed up my code and replace all loops by putting the value into an array, and then transfer the array to the worksheet
It seems to be straightforward for math calculations like in this example:
[URL]
But no luck with the one below. I was trying to test it on a simple loop which replaces two types of string into the 3rd one:
Code:
Dim lastrow, lastrow2, i As Long
With Worksheets("KPI5")
lastrow2 = .Range("N" & Rows.Count).End(xlUp).Row
.Range("T7:T" & lastrow2).Value = .Range("F7:F" & lastrow2).Value
For i = 8 To lastrow2
If .Range("T" & i).Value = "Modification" Then
[code]....
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
There is a formula
=vlookup(a1,Named_Range,2,false)
if I change a value in the range named "Named_Range" this vlookup does not update.
This formula works but does not allow for any updates. Meaning the vlookup returns the original value even after a cell has been changed. "Named_Range" is on a different sheet but in the same workbook.
Auto calculate is on. I have recalculated the cell manually. I have Office 2010
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
I have a set of old and new values that I need to compare.
We can assume that values in column X are the master values and values in Column Y are subordinate to column X
For example
Yesterday's values
x y
abc 1
def 2
ghi 3
Today's values
x y
abc 1
def 4
jkl 3
So first i need to find out that GHI is no longer available, and second that the amount for DEF has changed from 2 to 4. Hopefully this makes sense if not let me know and I can provide a sample spreadsheet or the like.
I am new to VBA. Using Excel 2010. I have a date picker on a userform named LtPayCalFm1. I have created a named range on a sheet within the workbook called LQD which is a date. I want the date picker to show the date LQD when the form opens. The code I have is
Code:
Private Sub LtPayCalFm1_Initialize()
Dim LQD As Range
DTPicker1.Value = LQD
End Sub
I get Run time error '380': Invalid property value How do I correct this?
I have tried:
Code:
With Sheet1
x = .[b7:i16,b19:i23,b27:i32].Value
But that only loads the first range (.[b7:i16]).
This does work:
Code:
.[b7:i16,b19:i23,b27:i32].Copy .[z1]: x = .[z1:ag21]: .[z1:ag21].Clear
I would rather avoid having to copy/paste, load the array, then clear. Is there a way to load the array directly?
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
Is it possible to load the page breaks for a range into an array without looping. Just checking, because looping is taking about 20 seconds or so.
Doesn't Work.
[Code] .....
Works but takes a second
[Code] ......
On this is a column of Categories and a Column of sizes. I want to use these in a user form. The user will select their Category from a drop down list and the second drop down list will include only the sizes that appear next to the chosen category So for example in the attachment if the user chose 'AUD' as a category they would get the size choices of, '2x4 insert', '2x4 replica' and 'A4L' in the other drop down menu.
The master list of sizes will have to remain on a worksheet as this is what other operators will amend from time to time.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedExcel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
Going off this excellent thread : [URL] ....
I'm looking to replace the words in
VB : myWords = Array("dog", "cat", "hamster")
with a named range.
Here is what I did. I added the lines:
VB:
Dim myArray As Variant
myArray = Range("colorbold")
And replaced mywords with
VB:
myWords = Array("colorbold")
Something is clearly wrong.
I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
I've set up a Named Range that refers to an array of constants, e.g. MyRange ={1,2,3,4,5}. This appears to be fine since I can output the named range to a range of cells in a row (e.g. A1:E1) and see 1,2,3,4,5 (one value in each column).
I'd like to use MyRange as the source for a Data Validation list in a cell.
Normally data validation list sources must be vertical, so I've set MyRange =TRANSPOSE({1,2,3,4,5}). This appears to be fine since I can output the named range to a range of cells in a column (e.g. A1:A5) and see 1,2,3,4,5 (one value in each row).
When I set MyRange as the source for data validation however, it resolves to an error.
why this setup doesn't work?
Workbook detailing the problem attached. Attachment 273788 NamedRangeDataValidationArrayConstansts.xlsx
I have a Excel 2010 file that I want to activate the file and create a folder in it named customUI.
the steps to achieve this?
I'm trying to make a range selection in a pivot table as per the snapshot below:
http:[url],....
The values I am trying to select are the ones that are both red and italic. (Mobile, Other Fix, Fix) from CBU_NA.
I've searched and found a way to select both the rows for CBU_NA category and also the column categ2.
However when I try to make an intersection out of the 2 ranges I receive an error. I'm using Excel 2010 on windows 7.Below the code I am using:
Code:
Sub FCST()
Dim r1, r2, r3 As Range
r1 = pt.PivotFields("categ2").DataRange.Select
Selection.Font.Italic = True[code]...
The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.
I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.
Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)
This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.
=INDEX('[GON-JUN 2012.xls]gon-jun'!$G$10:$G$254,MATCH(K6:P6,'[GON-JUN 2012.xls]gon-jun'!$D$10:$D$254,0))
[URL]
I have data that is formatted in an Excel 2010 table. The two columns in question are [Invoice #] and [Description]. In the description column I have descriptions of products as well as freight. The same invoice number would be tied to the product description as well as its associated freight. I need to filter out certain product types and their associated freight items.
The macro I wrote creates an array of invoice numbers that I want to filter out and leave the remaining invoices, but I can't get the filtering part to work. Here is my code:
Dim Invoices() As Variant 'array of invoice numbers
Dim Descriptions() As Variant 'array of Descriptions
Dim InvoiceFilter() As Variant 'array of invoice numbers to filter
Dim i As Integer 'counter
Dim j As Integer
j = 1
[Code]...
What happens now is that it filters out all values in the Invoice column instead of only the values in the InvoiceFilter array.
I have a workbook that is doing something I don't understand. In several places I am using arrays to transfer/modify information, then placing the array back onto the worksheet, and this works perfectly. The following code... doesn't.
(I've cut out unnecessary code like variable declarations - all my integer items are declared as Long)
Code:
Dim varA As Variant, varB(10000, 1) As Variant
Set wkDest = Sheets("a")
erB = 0
For lpTerm = 1 To 4
[Code]...
and several other ways. What happens is just null output, a full column of nothing. However, when I expand my worksheet range to two columns, all the data from varB appears - it is shifted down one column and row. So my data starts at .cells(2,2) instead of .cells(1,1). The data is all perfect, I've verified it left and right.... I just can't figure out why it's getting shifted like this.
I am trying to set the value of a cell with the value of another cell, but using rangesNames. This syntax is failing: ActiveSheet.Range("starting_mileage") = "=ActiveSheet.Range("lot_mileage")". how do I structure this to allow it as flexibly as possible?
View 6 Replies View RelatedHow can I retrieve the values from a dynamic named range with VBA?
Let's say we have created a dynamic list with the OFFSET function, how can I get the values of that dynamic range?
I am working with a worksheet that has hundreds of named ranges already in-place. When the creator defined these ranges, they defined them all statically. I would like to update each named range to be a variable named range.
I was thinking about doing a massive find / replace in the VB Editor, but I can't seem to find the named ranges. I assume they were defined from within Excel by the Insert > Name > Define method, and not through VBA and that is why I can't find them. Is there any way to simplify this process instead of manually trying to update each and every range?
I have Excel 2003 with named cells, for example...
cell cell name data
A1 AAA 3
A2 BBB 1
A3 CCC 2
and so on...
When I autofilter (ascending) these cells, the data in these cells sort correctly, but the cell names stay where they're at.
cell cell name data
A1 AAA 1
A2 BBB 2
A3 CCC 3
I'm not an Excel expert so I'd like to know is there any way I could get the cell names to sort with their data.
cell cell name data
A1 BBB 1
A2 CCC 2
A3 AAA 3
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I want to run a macro when a cell is changed and populate Cell A12 With
the value in a named range.
The Name of that range is in cell A3
so i assumed i could do the following:
I am trying to find a way to create a list of unique items from a named range. I have found a few solutions using filters for ranges that are contained in the one column but not named ranges that contain multiple rows and multiple columns.
Is there any way to copy all of the unique items from the named range to another location? Lets call the named range Table1 and it spans from B2 to J100.