Find Row Of Large Value In Array And Return Values In Different Named Range
Feb 28, 2012
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
View 9 Replies
ADVERTISEMENT
Mar 24, 2013
I'm looking for a formula that would tell me if a value in colume E can be found in column M while the values in column M may have characters before and after the value I'm looking for. The values are alpha and numberic in many cases.
Find E2 in M:M where E2 = 0123 and is in M:M as a15012388. The "yes/no" result is marked in red where I would like to have the answer.
Description
Looking For
Yes/No
[Code].....
View 4 Replies
View Related
Jan 15, 2014
Code:
For Each clsName In Array("Africa", "Europe", "Asia")
If I have the above array values in the named range _lstRgns in Sheet 1 of my workbook, how would I write the code to pick this up?
The named range is expandable, as it is an offset formula in the name manager.
clsName is the name of my defined array in my code
View 1 Replies
View Related
Jan 28, 2014
I am working on data that needs to be cleansed of the symbols i.e. *&/- etc so I am hoping that I can automate this as their are over 30,000 rows of data and takes time to go through each find and replace.
View 9 Replies
View Related
Feb 5, 2012
I am really struggling with the following formula:
MATCH(MIN(ABS(Ann_TaylorRegularBust-B4)),ABS(Ann_TaylorRegularBust-B4),0)
I am trying to find the cell in the named row "Ann_TaylorRegularBust" that is closest to the input bust size in cell B4. This formula works when I use actual range instead of the named array.
View 5 Replies
View Related
Aug 21, 2012
Going off this excellent thread : [URL] ....
I'm looking to replace the words in
VB : myWords = Array("dog", "cat", "hamster")
with a named range.
Here is what I did. I added the lines:
VB:
Dim myArray As Variant
myArray = Range("colorbold")
And replaced mywords with
VB:
myWords = Array("colorbold")
Something is clearly wrong.
View 3 Replies
View Related
May 29, 2014
I have enormous amounts of data to sort through (as we all do) and I am trying to link them to unique identifiers for easier data maintenance later.
What I want to do is vlookup from the 'solved' sheet a code, which will search the 'data' table and return the 'DFU' code.
Example 2905.xlsx
View 5 Replies
View Related
May 28, 2009
I understand how to find the top 5 /bottom 5 values using the large/small functions, but the question I have is: How do I get associated fields. For example I attached a sample sheet with values (Fields: Ticker,TE,Sector,Return). How do I get the Ticker,Sector that the return is for. I'd like to show all the associated fields that relate to the retun, but I can't find the solution on how to do that.
View 3 Replies
View Related
Jan 11, 2010
I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
View 3 Replies
View Related
Feb 20, 2008
how to get the value of a cell by its name. For example, i give cell B2 Name "Hello" and value "2". how to use vba to get the value of 2 using its name 'Hello', but not the cell 'B2'. Somethings people delete and add rows or columns and using range may lost the right value.
View 2 Replies
View Related
Oct 27, 2013
I've set up a Named Range that refers to an array of constants, e.g. MyRange ={1,2,3,4,5}. This appears to be fine since I can output the named range to a range of cells in a row (e.g. A1:E1) and see 1,2,3,4,5 (one value in each column).
I'd like to use MyRange as the source for a Data Validation list in a cell.
Normally data validation list sources must be vertical, so I've set MyRange =TRANSPOSE({1,2,3,4,5}). This appears to be fine since I can output the named range to a range of cells in a column (e.g. A1:A5) and see 1,2,3,4,5 (one value in each row).
When I set MyRange as the source for data validation however, it resolves to an error.
why this setup doesn't work?
Workbook detailing the problem attached. Attachment 273788 NamedRangeDataValidationArrayConstansts.xlsx
View 3 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
May 19, 2009
I have a named range which refers to: =MATCH(LARGE($G$5:$G$68,ROW(G5)-4),G$5:G$68,0)+4. It is supposed to find the largest figure in the adjacent column, list its row in cell H5, then the second largest for cell H6 and so on until the end of the data. The data in column G is dynamic and some cells will contain "0" with certain sections of data thus why I need a formula and cannot just use sort each time.
My problem is that when I use the formula as a named range I get "#N/A" and when I evaluate the formula I will get the answer but in array brackets (e.g.{17}) before the final step turns it to "#N/A". The formula will work fine if inputted directly into the cell but as the same formula will be used over three columns and numerous rows I would much prefer to use a named range.
View 8 Replies
View Related
Aug 19, 2009
I have a spreadsheet of information (product codes and values) and want to use VBA to find the top ten list of products by value. The list of products is variable in length so I can pass the data to a two-dimensioned array.
How do I ask VBA to return the top ten products by value - there can be duplicate values so I just want ten (if there are 4 #9s, I just want two of them, any two)?
View 9 Replies
View Related
Jan 17, 2012
I am looking to create some vba to find a value in a separate workbook using a named range in my main workbook.
View 8 Replies
View Related
Jul 21, 2011
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
View 9 Replies
View Related
May 14, 2009
I have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
View 14 Replies
View Related
Dec 27, 2013
I am remodeling my home and have put together a budget template. I have uploaded the file to make things easy to understand. Basically I want to return the values from column F and G on sheet "ledger" to the corresponding account name to column H in sheet "budget". For example, rows 14, 21, and 22 in the "budget" sheet currently correspond to the "fuel" account. I would like those values in column G (or F) to be added and calculated in cell H58 in the "budget" sheet.
View 5 Replies
View Related
Oct 17, 2011
I seem to be incapable of creating an array to return all of the values in each of the cells in the first row so that I can populate a combo box. I managed to do it without a problem for copying the sheet names within a workbook but not for this and I want to bang my head against the wall!
Basically, I have the first row of my spreadsheet for which I don't know how many columns contain data so my range is variable.
I then need to take the value of each cell and add it to my combo box (Later I would also like to use this routine to create and append sheets in other workbooks).
View 5 Replies
View Related
Apr 12, 2013
I'm a bit uncertain if my named range has turned out the way i want it to.. Is their anyway of finding the dimensions of my namned range, i.e. # of rows and columns?
View 8 Replies
View Related
Dec 23, 2011
I have a text string "Area" which relates to an entry in a named range "AreaCodes", which is stored on a non-active sheet. How can I activate the cell contaning the string other than using this, recorded, code
Code:
Sheets("Sheet3").Select
Range("A1").Select
Cells.Find(What:=Area, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
View 9 Replies
View Related
Oct 31, 2008
In VBA, does anyone know how I can find the beginning and end of a named range?
eg: Range "CellsToTotal" is A1:A10, if I know only the name of the range, can I retrieve both A1 and A10 values?
What I have done is named a range on the fly as so (where vStartCellCoordinates and vEndCellCoordinates are both variables holding 2 ints):
ActiveWorkbook.Names.Add Name:="CellsToTotal", RefersTo:="=" & Cells(vStartCellCoordinates(1), vEndCellCoordinates(2)).Address
What i'd like to do is then set a third arbitrary cell to sum up the range as a formula (note the following is a wierd adapted pseudocode thing):
Cells(iRow, iCol).Value = "=sum(" & start(Range("CellsToTotal").Address(0, 0) & ":" & end(Range("CellsToTotal").Address(0, 0) & ")"
How can I make this work?
View 9 Replies
View Related
Jan 18, 2010
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
View 3 Replies
View Related
May 5, 2014
I am trying to return an array of values into 1 cell.
Basically, I have a gigantic list of item names, item numbers, and reuse codes.
I want to populate all the reuse codes by item number in a second sheet:
something like this:
Source sheet
Item item num Reuse code
Widget1 w001 298767
Widget2 w002 4894957
widget3 w003 28276
Widget1 w001 12345
Widget1 w001 678910
What I want this code/formula to do is consolidate the reuse codes based on the item number.
Aggregate Sheet
Item item num Reuse code
Widget1 w001 298767;12345;678910
Widget2 w002 4894957
widget3 w003 28276
I have this formula but it only gets the 1st Reuse code, I want it to get ALL reuse codes for that item.
{=INDEX('Reuse list '!$P$2:$P$24489,SMALL(IF('Reuse list '!$E$2:$E$24489='Status Sheet'!A11,ROW('Reuse list '!$E$2:$E$24489)-ROW('Reuse list '!$E$2)+1),1))}
View 2 Replies
View Related
Nov 12, 2008
Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
View 10 Replies
View Related
Nov 17, 2011
How can i find if a named range exists in a sheet using VBA?
E.g.: I have a named range called test that houses 4 numbers in four cells. Using
Code:
Dim rtest As Range
Set rtest = Worksheets("sheet1").Range("test")
.
.
.
.
rFoundCell = _
Cells.Find(What:=rtest, After:=Range("a1"), LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:= _
xlByRows, SearchDirection:=xlNext, MatchCase:=False)
Won't work. Run - time error 91 occurs.
View 9 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
May 9, 2014
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
=COUNTIFS(Sheet1!$ColA:$ColA,Sheet2!$ColA:$ColA,Sheet1!$ColB:$ColB,"paid")
Sheet1:
ColA
ColB
123
paid
[Code] .....
Sheet2:
ColA
ColB
23
NY
[Code] .....
View 7 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
May 30, 2006
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies
View Related
