I am looking up the largest value across various sheets (1 to 99) with the following formula:
=LARGE('1:99'!$B$1:$B$50;$C3)
That correctly returns the largest value in range B1:B50 across sheets 1 to 99.
However now I want to know the sheet name of the value above in a seperate cell, let say in: A3.
I'm using excel 2010.
I'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
Sheet1
A
B
C
[Code]....
Excel 2010
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).
Nittie Query.xlsx
How i could this one in formula or macro, first my 1st sheet is just as show below (maybe use for a template)
1st sheet (full list)
fruits
china
orange
0
0
0
0
fruits
china
apple
[Code]...
then 2nd sheet, report i get which something like this :
fruits
china
orange
1
25
1
500
fruits
jiapan
kiwi
2
[Code]...
then i want result like this on 3rd sheet :
fruits
china
orange
1
25
1
599
[Code]....
so basically i want add missing row on sheet 2 from sheet 1
I am using office 2010.
in Excel 2010, whether using VBA or otherwise;
1) how can I return the oldest date in the entire workbook (or at least in the entire sheet if it's not possible to find that date in the entire workbook).
2) how about the most recent date ?
I'm trying to get the Median (and min/max later) of certain values on a different sheet. For example, I'm operating in one sheet and pulling the values from the sheet "Form Responses". I want a median for numbers when the values in column B are "Aransas" and the values in column D are Yes. The values are in Column F. My formula is:
=MEDIAN(IF('Form Responses'!B:B="Aransas",IF('Form Responses'!D:D="Yes",'Form Responses'!F:F,""),""))
It's giving me the median for ALL of the numbers in F and I can't figure out why.
Following that, I'll want a median for all the numbers in F when column B value is "Aransas" (in other words, dropping the Column D condition).
Excel 2010, Windows 7
I am looking for a VBA code which can be used to interpolate between values at a given interval and return these values to an excel sheet. I have a list with X and Y values and need to interpolate (linear) between two X points to return intermediate values for Y (interval between values is defined by the user in a userform). The code is to continue with interpolation between two consecutive X points until it has reached the end of the listing. In the example only several points are given, but the list can be longer or shorter than given in the example. The results need to be returned to a new sheet.
View 4 Replies View RelatedI have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code:
' CollectMasterData Macro
'
Sub CopyToMaster()
Dim wkSht As Worksheet
Dim DestSht As Worksheet
Dim DestRow As Long
Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
Code:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
I pull a report (Form2), and I want to import values into another sheet (Form1).
From Form2, I want to import the cell value in $D# based on the name in cell $C#, when the name in $C# matches the value in D2 on Form1. Ultimately, the value from $D# will return to cell G5 in Form1.
How many sheets can be created in Excel 2010? Is it depend on memory PC or is any limit within Excel?
View 2 Replies View Related Excel 2010. I have two very large tables of data:
Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:
ItemsGroup ID
apple
pear
grape
fig
banana
guava
peach
mango
Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:
Group IDItem1 Item2 Item3 etc.
214applepeargrape
33fig
7bananaguava
59peachmango
Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".
Is is possible to construct a vlookup to identify that there are duplicate values in the Lookup_value and the Table_array and return the second and third values in the Formula result?
In the acutal project the Lookup_values and Table_arrays are in separate worksheets, but I think the example below represents the issue I'm working with.
I'm using Excel 2010
ABCDEFG1=SUM(IF($A$2:$A$8=A2,1,0))=VLOOKUP(F2,$A$2:$B$8,2,FALSE)
2JOHN13BILL12BILL11BOB14MARY11FRED15JOHN23JOHN16FRED11JOHN17BOB11JOHN18JOHN33MARY1
I have row 2 formatted as a fraction and row 1 formatted as percentage.
I am looking for way to return the percentage of row 2 in row 1. I.E. If i have 3/4 in a2, I want it to return 75% in a1. I have figured a formula to return a percentage for numbers with only 1 item to the left of the division sign (i.e., 3/4). That correctly returns 75%. I am struggling with working a formula to also return larger numbers (e.g. 12/15).
I'm using excel 2010......
I have the following data in column H ....
Excel 2010H2Ms L Sentinella3Mr R and Mrs A Agarwal4Dr H M Bingham and Mrs G M VersaceSheet1
I would like to return (into columns I and J) only the surnames that exist in each cell, so it would return something like this ...
Excel 2010HIJ2Ms L SentinellaSentinella3Mr R and Mrs A AgarwalAgarwal4Dr H M Bingham and Mrs G M VersaceBinghamVersaaceSheet1
Notice, there are two surnames in H4, so one of the surnames would be returned into I4 and the other one into J4.
I'm able to write formula to strip out everything and return the surname but only if there's one surname in the cell, I can't figure how to do it when there are two.
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I am using Excel 2010.
I found code from the internet attributed to Bob Phillips for VBA to have a dialog box pop up and allow the user to select what worksheet to navigate to.
The code works well except it doesn't exclude hidden or very hidden worksheets.
Code:
Sub BrowseSheets()
Const nPerColumn As Long = 38 'number of items per column
Const nWidth As Long = 13 'width of each letter
Const nHeight As Long = 18 'height of each row
Const sID As String = "___SheetGoto" 'name of dialog sheet
Const kCaption As String = " Select worksheet to goto"
'dialog caption
[Code]....
I know there is the line of "If Sheets(i).Visible And i Mod nPerColumn = 1 Then..." but it still allows all sheets to show up in the dialog box.
How it can be modified to include visible sheets only?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
I'm working to compare to sheet every days and i have been doing this for 2 years
I need to write macro to compare 2 columns from two sheets (sheet1 and sheet2) on same excel book and display the result on the sheet2. The number of rows and columns may not be equal and it can vary each time.
The result should be written in the sheet2 at column 'NOTES'
If serial number is blank, the result written at NOTES column =*NOT TRACK
If serial number found on sheet 1-serialNumber column, the result written at NOTES column =*Registered
If no serial number found on sheet 1-serialNumber column, the result written at NOTES column =*New registration
Example Sheet1:
PurchaseOrderNo
Manufacturer
ProductNumber
SerialNumber
PO123
Table
453154-B21
[Code] .....
I'm using excel 2010 and window 7.
I get syntax error on return statement. I am using Excel 2010.
View 2 Replies View RelatedI have my data arranged in a table on sheet1 as shown below.
Columns B to H contain the hours each person normally works on the days of the week Sun to Sat. In columns I to O are the hours that each person has booked as holiday for that week.
On sheet2 I would like to be able to enter a holiday day in C1. In A3 to A15 I would then have a list of all the people who will be working on that day and in C3 to C15 have a list of the people who are on holiday so the output on sheet 2 would look like this.
Basically I'm after the formulas for A3 and C3 that can be copied down the column depending on how big my table gets. I am using Excel 2010.
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
Is there a way to sort out the sheets into alphabetical order in excel 2010?
View 5 Replies View RelatedI have a workbook that contains two sheets with two separate queries. On the first sheet I have two cells designated to accept the values for the parameters. The first sheet accepts the values and populates the table correctly. The second sheet doesn't seem to accept the values and just returns blank rows.
View 9 Replies View RelatedI have headings across the sheet "Inventory" in cells E5:AA5 with further headings down the sheet D6:D40.Data Validation drop down list is in cells E6:AA40.I want to be able to place a number 1 or number 2 in any cell in the range C6:C40 in the "inventory" sheet and with a macro create 2 new sheets.Sheet 1 will contain all the headings which had a 1 in any of the cells in the range C6:C40 and sheet 2 will have all the headings which had the number 2 from the range C6:40.Both sheets 1 & 2 will contain all the headings from "Inventory" sheet in cells E5:AA5.The data validation drop down list is not required in sheets 1 and 2 but if "inventory" sheet does get updated that it also updates sheet 1 and sheet 2.... Version i am using is Excel 2010
View 1 Replies View RelatedExcel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code:
Private Sub Worksheet_Activate()
' If WS is activated, place information in header
Application.ScreenUpdating = False
'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
I am using microsoft excel 2010. I currently have workbooks for various things with 46 worksheets in each one (each worksheet is a store). I usually go into the worksheets daily and dump numbers into each sheet. I was wondering if there was a way to switch worksheets but keep the cell the same when i switch to a different sheet to make it much easier to dump the numbers in.
For example: Say in worksheet1 i am in cell A34 to dump in a number. When i switch to worksheet2 i want to be in the same cell to dump the next number for the next store and so on and so forth for the next 44 sheets.
I have a sheet that contains a Microsoft Query (SQL) data connection. In cell C3, I have the month name and I also have a year cell (C4), which contains just the year based on what the current month (=YEAR(TODAY())) is.
For this example let's use May (C3) and 2013 (C4)
C3 and C4 are used as parameters for the SQL query, so if I change the month to January and the Year to 2010, data is refreshed to bring in that data.
Works smashingly.
I then want to add 11 more sheets (12 total), so each sheet is a month. The value in cell C3 on each sheet will be the month name.
If I just copy this sheet 11 times, Excel adds 11 extra data connections; 1 for each sheet. As the query in each sheet needs to be exactly the same, I don't want this. I want the 12 sheets to use the same data connection, only with the specified parameters at the sheet level.
Otherwise, if I need to add or remove a column, or change a column name, rather than just doing it once, I'd have to do it 12 times.
This can't be right, surely, as that would be the most ridiculous design flaw I've ever seen in a piece of software. How can having the same query 12 times be a good thing?
I'm a bit concerned that googling 'excel data connections multiple sheets' always wants to be 'excel multiple data connections one sheet' - I want 'excel multiple sheets one data connection'