Excel 2010 :: Looking Up One Value And Need To Return Multiple Values Horizontally
Mar 28, 2014
I have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).
I managed to found an array formula that return multiple values with a condition. Below the formula:
[Code]....
I am attaching a simple file. In cell O4 I paste the formula, and I drag it as much as I need. But my issue comes when the formula begins the calculations. I need to calculate 50 columns with over 9,000 rows each column (over 45,000 arrays). Imagine the processing load to my computer and the consuming of time.
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
In column CT between rows 11:210 is the vertical data that includes duplicates. I am looking to create a formula that can lookup each value between CT11:CT210 and return only the unique values horizontally starting in cell CW9 and onwards.
Example: CT11:CT14 looks like 5x20 6x4 5x20 5x8 and so on and so forth..
I would then like this formula to return the above data (which goes all the way to CT210) in this format starting in cell CW9 - 5x20 then CX9 - 6x4 and finally CY9 - 5x8.
I need a formula or array to perform the following in Excel 2010:
I have 2 worksheets "Master Report" and "Free text comments". The master report will be shaed with individuals but the Free Text comments worksheet will not.
sample feedback report.xlsx
In cells D2 downwards on the "Master Report" I want to show the individual feedback comments from the "Free Text comments" worksheet that have been made by other people for the individual named in cell A2 on the "Master Report" worksheet. So on James' master report it would show the 8 individual comments listed for him on the Free text comments" worksheet.
I have searched the internet and tried various combos of lookups, IFs, index and match but have not come across the right formula yet.
I am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx
When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.
If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.
I have a spreadsheet with two date/time columns 'Date1' & 'Date2'. Each date/time column has its own column with corresponding values ('Var1' & 'Var2'). These dates cover the same time period, however values for 'Var2' were collected less frequently than 'Var1'. I want ONLY the values in 'Var1' that correspond to the dates in 'Date2'
I am trying to select values from one column 'Var1' which have correlating date/time in column 'Date1' that match the dates specified in 'Date2'. Basically I need the values from 'Var1' that match the same date/time as 'Var2'
I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.
Here is the set up:
Column AColumn BColumn C (Side)(Qty)(Price) Buy5,51215.67 Sell119,428null Buy24,20945.77 Sell20,05412.25 ...
I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))
The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:
ItemsGroup ID apple pear grape fig banana guava peach mango
Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:
Group IDItem1 Item2 Item3 etc. 214applepeargrape 33fig 7bananaguava 59peachmango
Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".
Is is possible to construct a vlookup to identify that there are duplicate values in the Lookup_value and the Table_array and return the second and third values in the Formula result?
In the acutal project the Lookup_values and Table_arrays are in separate worksheets, but I think the example below represents the issue I'm working with.
I have row 2 formatted as a fraction and row 1 formatted as percentage.
I am looking for way to return the percentage of row 2 in row 1. I.E. If i have 3/4 in a2, I want it to return 75% in a1. I have figured a formula to return a percentage for numbers with only 1 item to the left of the division sign (i.e., 3/4). That correctly returns 75%. I am struggling with working a formula to also return larger numbers (e.g. 12/15).
Excel 2010H2Ms L Sentinella3Mr R and Mrs A Agarwal4Dr H M Bingham and Mrs G M VersaceSheet1
I would like to return (into columns I and J) only the surnames that exist in each cell, so it would return something like this ...
Excel 2010HIJ2Ms L SentinellaSentinella3Mr R and Mrs A AgarwalAgarwal4Dr H M Bingham and Mrs G M VersaceBinghamVersaaceSheet1
Notice, there are two surnames in H4, so one of the surnames would be returned into I4 and the other one into J4.
I'm able to write formula to strip out everything and return the surname but only if there's one surname in the cell, I can't figure how to do it when there are two.
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output A | B Z 1| 10 | a 10,a,b,c 2| 10 | b 11,a 3| 10 | c 12,a,b 4| 11 | a 5| 12 | a 6| 12 | b
I have over 300 rows with a username in the column A followed by 3 fields in the following columns B,C,D. I want to just sort all 300 rows alphabetically by column B,C,D.
I have my data arranged in a table on sheet1 as shown below.
Columns B to H contain the hours each person normally works on the days of the week Sun to Sat. In columns I to O are the hours that each person has booked as holiday for that week.
On sheet2 I would like to be able to enter a holiday day in C1. In A3 to A15 I would then have a list of all the people who will be working on that day and in C3 to C15 have a list of the people who are on holiday so the output on sheet 2 would look like this.
Basically I'm after the formulas for A3 and C3 that can be copied down the column depending on how big my table gets. I am using Excel 2010.
I have sheet 1 that in cells V5:V20 is a data validation drop down box. In cells W5:W20 I have another data validation drop down box. On sheet 2 I have a table that in column A matches the data in the drop down box's in column V on sheet 1. Row 1 on sheet 2 data matches the data in the drop down boxes in sheet 1 cells W5:W20. What I'd like to do is on sheet 1 Cells Y5:Y20 have a VBA code to lookup the data in columns V and W from sheet 2 and return the value.
I've got an old Excel sheet with Stephen Bullen's function for returning the active filter criteria (Rob on Programming: Excel: Displaying Autofilter Criteria). My status sheet may be filtered in multiple ways, and when the user is happy with the filter selections, she can create a powerpoint file with a graph and a summary of the filtered table. As we are using Excel 2010, users are very likely to select more than two filters.
Example: Range A1:E100 has the following headers: Field, Installation, Project,Type, Phase.
The controller wants to filter on: Field equals north or south or west Phase equals completed The manager for Field South wants to filter on: Field equals southType equals maintenance or repair or modification Installation begins with Zeus.
As the filters are not shown when I copy the table to powerpoint, I would like to create a summary of the user's active filters that is pasted into a sheet (for subsequent copying to powerpoint). For the users in the example above, that table would look something like this:
Controller: Active filters Field: north, south, west Phase: completed Manager, Field South: Active filters Field: south Type: maintenance, repair, modification Installation: Zeus*
I've looked at various functions intended to take Stephen Bullen's code into Excel 2010's multiple criteria world (e.g. this: User Defined Function to Display AutoFilter Criteria for More Than Two Criteria in Excel 2007 / Excel 2010), but I have not been able to convert it to a functioning macro.
Any code that could be used for this sort of task, or any tips for relevant code?
I am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
1) how can I return the oldest date in the entire workbook (or at least in the entire sheet if it's not possible to find that date in the entire workbook).
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.