1) how can I return the oldest date in the entire workbook (or at least in the entire sheet if it's not possible to find that date in the entire workbook).
What I want to do is return the oldest date to another sheet, but I only want to return the oldest date if the backlog value is higher than 0. So example below has oldest date with 0 as backlog value, I don't want to return that date, but go to the oldest one with an actual backlog value.
So I have the following raw data in Sheet1
[Code] .....
Now I want to put this raw data in Sheet 2
I use this formula to pull the data =SMALL(Sheet1!C3:C5,1)) but this returns the B4 value to me, which I don't want as A4 is 0.
I've been thinking about somehow using VLOOKUP or IF to sort this out but I am stuck.
I have 4 columns (Date (A), Open (B), High (C), Low (D)) in date order with the newest at the top. I have a value in G1, I'd like to see the oldest date returned in H1 of when a value in the (D) column is lower then G1. I've been looking at match and vlookup but what I can't seem to figure out is how to return the oldest date.
I need a formula that links to another workbook where it looks in a column for the oldest date which appears more than 10 times. So if the oldest date was 01/01/2006 but it only appeared twice, it would ignore it, but if there was then 02/02/06 which appeared 11 times, it qould quote that date in a cell in the workbook
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
I want to sort a column in Excel 2007 which is having dates. Normally, we use oldest to newest or newest to oldest option in sort & filter. But i am unable to find this option in my excel sheet. how can I find this option in Sort & Filter.
Note: I have imported this data column from Access 2007
I have a rolling 12 month (each day in column) tab in Excel 2010 that references variances by ID number in column A, and the column headers are each day for 366 days (2011). I would like to create a tab that shows the past 10 day's variances by ID number. I haven't been able to write a formula that will look at the date headers and the row ID number to return the figure for that day. Here is a sample of the 12 month rolling and the 10 days at a glance that I want to populate.
Rolling 12 Months IDName12/25/201212/26/201212/27/201212/28/201212/29/2012and so on 1234Employee Name - - - - (11.07) 1235Employee Name - - - 0.20 - 1236Employee Name - - - - - 1237Employee Name - - - - (1.00)
I am using Excel 2010. I have a user form with a date picker on it. I simply want to transfer the date chosen to cell A3 on a sheet. I have two problems. When I click the date picker, it doesn't show all the days of the month. When I do pick a date, it isn't transferred to the sheet. This is the code I am using in the user form:
VB: Private Sub DTPicker1_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date) meetdate = UserForm2.DTPicker1.Value Sheets("MeetData").Range("A3").Value = meetdate End Sub
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B Expiry Date________Redeemed by 15/08/2014 15/02/2014 15/08/2014________John 15/02/2010________Marc 15/02/2011________Bob
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
Without VBA, I'd like to find the most recent date in a workbook. The workbook as various columns with dates on numerous sheets. I just need to know the date that is the newest date. Nothing else.
date1/Jan2/Jan3/Jan4/Jan5/Jan6/Jan7/Jan8/Jan9/Jan10/Jan11/Janquantity 502023108948202535current stock 200oldest date of manufacture?
I have a report that lists the quantity of an item that is manufactured on particular day. On some days there will be no items produced. The report is similar to the above table. I don't want to change the table format.
I know the current stock of that item (in this example it is 200). Note that the current stock is not just the sum of the quantiy for each day's production.
I need a function that will determine the oldest date of manufacture of material in the current stock. The function assumes that that the current stock is made up of the most recently produced material. ie the stock is depleted on a first in -first out basis. Essentially the calculation has to sum backwards from the most recent manufacture date until the total = 200 and then lookup to corresponding date.
In the above table the oldest prodcution date would be 6/Jan. The answer to the funstion in example = 6/Jan
I want to know the macro code to find out the oldest date in the Calculation sheet of the attachment based on two criteria.
The criteria should be if the Item ID on Calculation sheet matches the Item Id Pivot sheet and then if the Status on pivot sheet and calculation sheet matches then the macro should find out the oldest date for each item ID. And once the oldest date is identified the difference on pivot sheet should be added to the cost basis column on calculation sheet to the already found oldest date lot.
I am looking for a formula to determine the oldest date in a range of cells. BUT, the part that's kicking me in the pants here, is that the range will change.
In column D, I have a person's name. The number of times that person's name will appear will change every time I run this formula. In column F, I have a date & time. I'm looking for a formula that will determine the oldest date/time associated with that person.
I looking to track the oldest entry that is still marked "Open" or "In progress". So far I have done the below If Statement:- =IF(H24="Open",E24,IF(H24="In progress",E24,"")). This returns the Date it was logged if the status is "Open" or "In progress". to column T, So far so good!
So in cell T22 i wanted excel to show me the oldest date so i used the MIN function like so:- =MIN(T24:T40). This returned me the oldest date which i then wanted to know how many days this has been open for so i used:- = SUM(TODAY()-H6)
which gives me the number of days. This all works fine until..........i don't have any entries set to "Open" or "In progress" or any dates added (e.g. start of a new week). When this is the case the MIN function returns a value of 01/01/04 which in turn tells me that the oldest entry is 38,604 days old. I have tried different combinations of If statements to ignore the blanks / date etc but i just can't make it return zero or even better blank. I have attached a sample of my sheet and inserted comments to explain what each part does
I have a list of dates going through several years of data - month ends and starts don't always coincide with calendar months. I need to figure out a way to get the oldest date of the previous month, for example. Tried vlookup but could figure out how to do it for one year only, hence not as applicable with several years of data.
I have a UserForm which writes data to rows in a master spreadsheet. I'm attempting to write some vba code for a CommandButton in the master spreadsheet which can identify and delete duplicate entries based on "user ID", "Date", and "Time". I would like the CommandButton to retain the most recent entry from a user and delete all previous entries.
My master sheet is set out as such... A, B, C, D, UserID, Date, Time, Response
The users could potentially submit multiple entries on the same day. Ideally I would like to be able to click a CommandButton and delete each user's submission but retain their most recent one (based on "UserID", then "Date", then "Time").
I've searched all day for a solution and I've come close but I can not figure out a code that accounts for my three variables ("UserID", then "Date", then "Time").
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
I have a spreadsheet where we will be inserting the Arabic Hijri date taken from a Customs document (bayan). On my spreadsheet I'd like to have a column immediately next to the Hijri date that would convert the Hijri date to the Gregorian date so both dates will be visible for our Arabic and Western personnel who will be using the spreadsheet.
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.