I have headings across the sheet "Inventory" in cells E5:AA5 with further headings down the sheet D6:D40.Data Validation drop down list is in cells E6:AA40.I want to be able to place a number 1 or number 2 in any cell in the range C6:C40 in the "inventory" sheet and with a macro create 2 new sheets.Sheet 1 will contain all the headings which had a 1 in any of the cells in the range C6:C40 and sheet 2 will have all the headings which had the number 2 from the range C6:40.Both sheets 1 & 2 will contain all the headings from "Inventory" sheet in cells E5:AA5.The data validation drop down list is not required in sheets 1 and 2 but if "inventory" sheet does get updated that it also updates sheet 1 and sheet 2.... Version i am using is Excel 2010
I'm working to compare to sheet every days and i have been doing this for 2 years
I need to write macro to compare 2 columns from two sheets (sheet1 and sheet2) on same excel book and display the result on the sheet2. The number of rows and columns may not be equal and it can vary each time.
The result should be written in the sheet2 at column 'NOTES'
If serial number is blank, the result written at NOTES column =*NOT TRACK
If serial number found on sheet 1-serialNumber column, the result written at NOTES column =*Registered
If no serial number found on sheet 1-serialNumber column, the result written at NOTES column =*New registration
Example Sheet1: PurchaseOrderNo Manufacturer ProductNumber SerialNumber
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I want to create a bell curve for my team's annual appraisal. There are 12 people in my team. The scale is 1-5, where normally rating range from 2.9 to 4.0.
Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.
What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.
So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.
The code I came up with so far looks like this:
Function AK_Overlap_Go(x, y) Dim Temp(1 To 2, 2 To 1) Dim x As Integer
[Code]...
One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.
I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).
At the moment I cannot format the axis and minor/major units remain numbers.
Im looking to create random data for an athlete over about 4 months with daily tests, however when im using the =randbetween(*,*) function the data is too 'Random'. so im looking to create a trend in the data, like real athletes will have. is there a function in Excel 2010 that can do this?
The boundaries of the data are -336,416 (i know its quite a big range)
I am creating a report where there are multiple conditions and I am using MS Excel 2010.
Summary sheet will display Date of Completion - If the exam has been taken already In Progress - if the exam has been started but not yet completed Not Started - if the exam has not yet been taken
Available data in Source sheet Completion_Date - Date when the exam was taken or "Blank" if the exam is still In Progress Completion_Status - Completed & In Progress only (all subjects that are not in the Source sheet shall be tagged as "Not Started"
I am trying to create a scatterplot from some data I have. I attempt this by selecting multiple columns using Ctrl and clicking on the letters above. This results in it plotting only the first selected column on the Y axis with only 1 2 3... on the X axis.
When I however select multiple columns by clicking on a column and dragging to more columns it does plot as I would expect with the first column as X values and the rest Y values.
I know it is possible to create a graph and add data manually but this is way slower and I think that it should be able to be done differently.
I'm trying to create a bracket for video game tournaments and I'm having trouble with some of the functionality I want it to have.
Right now, I have cells B7 and B9 that will pull player names from another check in sheet. I have another cell, D8, that I would like to have a drop down list in containing the contents of B7 and B9. Everything I see online says to use Data Validation, but apparently that tool can't make a list using cells that aren't next to each other, so that won't work. How else can I tell excel how to populate this list? It is vital that the cells be apart from each other because the visual formatting is necessary for displaying the bracket on a projector so that the players can see their match assignments.
In addition, I would like to have another drop down menu in another cell with a list of valid bracket sizes (4, 8, 16, 32, etc.), and have the cells of the sheet either be visible or invisible depending on how many max players can enter. In other words, if columns B, D, F, and H correspond to the number of rounds it will take to finish the tournament (3, 2, 1, and 0, respectively), I would like the sheet to display only the cells necessary for the tournament, pull player names into the left most cells needed from another worksheet used for sign ups, and auto populate all of the columns to the right of the column for first round with drop down lists for the players who could have won that match in the previous round.
This is a code that i have for having a master workbook, and saving it in different folder so my employee cant access it
Sub NextInvoice() Range("J2").Value = Range("J2").Value + 1 Range("E6:E9,H9,J9,B14:K20,H4,B28:K32,B36:B39,D36:D39,F36:F39,B42:K43,B46:K47,B50:K51,B54:K55,B58:K59,B62:K63,B66:K67,B70:K71,B 74:K75,D78:E78").ClearContents End Sub Sub SaveInvWithNewName() Dim NewFN As Variant 'Copy Invoice to a new workbook
[code].....
I have found a code for mandatory cell, but it creates a second macro and i was not able to link the two.The mandatory field has drop down of employee's and it is located in the cells D78:E78.
The easiest way I can describe the scenario I am trying to create, is to use a company list of personnel (my index) and to generate a time-sheet workbook per person based on a pre-populated template. This time-sheet is saved as the persons name and has the persons name entered into cell D:10
I have a workbook which contains two worksheets;
1) An Index sheet which contains a list of names that I wish to use in Q16 downwards (note the length of this list will vary each time I run this)
2) A "template" sheet which I wish to duplicate in new workbooks
3) A second "data" sheet that I wish to copy across in new workbooks
I need a macro that will take the "template" and "data" sheets and copy it into a new workbook, renaming each new workbook to each name in my Index sheet. I also want that same Name to be copied into cell reference D:10 of the "template" each time.
The end result is that I should have a series of new files generated and saved which are named the same as the Index list, with both the "Template" sheet and the "Data" sheet present, with the cell D:10 pre-populated with the Name provided in the "Template" sheet.
I am trying to create challenge/response cards. Each card will have a 5-digit number in the upper-left and lower-right corner along with a series of rows containing a line number and 3 pairs of challenge/response words.
Rather than have have copies of these cards, I want the central office to have a macro-enabled workbook wherein they can enter the two numbers from the card and have the challenge/response matrix regenerate on a worksheet.
So, essentially, I want the challenges random number generator seeded from one of the 5-digit numbers and the responses random number generator seeded from the other 5-digit number.
I am trying to use
Code: Randomize(Seed) where Seed is one of the 5-digit numbers.
The problem appears to be that, no matter what I use for Seed, the RND(-1) function is not resulting in different numbers.
I am inputting 5 variables in columns A through E:
Family (Y/N) Adult (1/0) Child (1/0) Date of Birth Gender
I am attempting to generate:
Age Males in families sorted into age brackets Age Females in families sorted into age brackets Age Males single sorted into age brackets Age Females single sorted into age brackets
I did this rather simplistically generating 4 columns (F through I) and then using COUNTIF (although I know there is a better way than the lame way I used COUNTIF but that is not the point right now).
However, my question is, can I generate the data described above (located in D13:I22 on my spreadsheet) without going through the messy, cumbersome step of creating extra columns?
I am creating a vacation calendar for all of my associates. I have 763 employees so, i want to run a macro that will react a worksheet for each of them. I will have an employee list that will create the sheets and I will have a VLOOK Up to update and pull information when we have new hires come on board.
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
I am trying to use a macro to compare data from 2 sheets and spit out matching data in a third sheet. The first sheet has two columns of data. the second sheet has 4 columns of data. Only one column from sheet 1 and 1 column from sheet 2 will actually have matching data.
All other columns in sheet 1 and 2 are associated to the matching columns and must "tag along" into the 3rd sheet. I would love the third sheet to have a button that I just click and it populates the data.
The macro will be comparing between 50,000 and 500,000 items. Possibly a good book to use or even a referral for a proffesioanl or even some good heartedness,
I found code from the internet attributed to Bob Phillips for VBA to have a dialog box pop up and allow the user to select what worksheet to navigate to.
The code works well except it doesn't exclude hidden or very hidden worksheets.
Code:
Sub BrowseSheets() Const nPerColumn As Long = 38 'number of items per column Const nWidth As Long = 13 'width of each letter Const nHeight As Long = 18 'height of each row Const sID As String = "___SheetGoto" 'name of dialog sheet Const kCaption As String = " Select worksheet to goto" 'dialog caption
[Code]....
I know there is the line of "If Sheets(i).Visible And i Mod nPerColumn = 1 Then..." but it still allows all sheets to show up in the dialog box.
How it can be modified to include visible sheets only?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Creating a macro to compare 2 sheets in a workbook and print the differences to a 3rd sheet.
Each sheet will have the same number of fields, 5 columns with the header in the first row.
All values in the cells are integer except for the last field which will be a character.
The key is the value in the 2nd column. If it's not in the other sheet, then it's a new record. If it's a new record then highlight it a color depending on what sheet contains the new record. Now if the key is the same in both sheets, then check the other columns to see what's different. If there is a difference, print the record for both sheets in the third sheet and highlight the differences. I attached a sample of what I want.
I have a workbook that contains two sheets with two separate queries. On the first sheet I have two cells designated to accept the values for the parameters. The first sheet accepts the values and populates the table correctly. The second sheet doesn't seem to accept the values and just returns blank rows.
Excel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code: Private Sub Worksheet_Activate() ' If WS is activated, place information in header Application.ScreenUpdating = False 'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
I am using microsoft excel 2010. I currently have workbooks for various things with 46 worksheets in each one (each worksheet is a store). I usually go into the worksheets daily and dump numbers into each sheet. I was wondering if there was a way to switch worksheets but keep the cell the same when i switch to a different sheet to make it much easier to dump the numbers in.
For example: Say in worksheet1 i am in cell A34 to dump in a number. When i switch to worksheet2 i want to be in the same cell to dump the next number for the next store and so on and so forth for the next 44 sheets.
