Excel 2010 :: Macro To Search List Then Write Selective Items To Another Sheet
Dec 12, 2013
The sheet shown, Complaints, lists on each row information on a single complaint. This information extends from Col A to Col Y (though not that way here, the data actually begins in row 3). I want to highlight a Customer cell, say H227 for Customer A, then activate a macro that (1) recognizes the active customer (here A), searches the list, identifies each row where A is the customer and then writes each row into sheet "Event" beginning in row 4. I should then see the same A to Y cells of information, beginning in row 4, filled in sheet Event for the six customer A complaints. Note, the actual data in sheet Complaints involves 300 rows of data, and over 100 customers can be on the list, some up to 15 times. I know that I could do this by filtering the data, copying and pasting, but a simple macro would be quicker for the group of individuals involved. Note, I then use this information to populate a chart.
Excel 2010ABCDEFGHIJKLMNOPQRSTUVWXY226#INITIATION MonthINITIATION DATECRM Transaction IDSales OrderSalesSHIP PlantCUSTOMERCITYST/PROVPRODUCTProductLbs InvolvedPROBLEM Complaint
[Code]....
View 9 Replies
ADVERTISEMENT
Feb 3, 2012
The setup of my worksheet looks like this:
Excel 2010ABCDEFG1Tch grpTchr Split27B-MA5AWAWAWAWAWAW37B-MA4CB1,JDCB1,JDJD,CB1MMF,JDMMF,JDMMF,JD47B-MA3SXGSXGSZBSZBSZBSZBTchGrps
A great chance to use the HTML Maker for the first time!
What I would like to do here is show how many of each value there is in the range.
So for 7B-MA5, it would say 6. For 7B-MA4, it would be 2 / 1 / 3, since there are 3 unique values and their counts respectively. Finally for 7B-MA3 it would say 3 / 3
A formula option would be great but I'll also take a macro option since it is a macro that generates these lists in the first place, so I could just add the new code to the end of it.
View 4 Replies
View Related
Jan 21, 2014
Excel 2010. There is a limit to the usability of the
=INDEX($A$1:$A$1000,MATCH(0,COUNTIF($A$1:$A$1000,"<"&$A$1:$A$1000),0))
method. It seems like the limitation is in the Countif function going over 1000 (or some other size limit)
I have a list of ~1500 rows, of that there are approximately 55 unique items. Doing the unique array works correctly up until item ~40, upon which it fails by returning the 1st item only (for the rest).
Trying to debug, and pulling out the Match section, it functions up until 976 (that is
MATCH(0,COUNTIF($N$1:$N40,$C$3:$C$1500),0)
returns 976) anything after returns just 1 (1st item).
It seems to be a limitation on the text string size that COUNTIF can handle.
View 7 Replies
View Related
Mar 15, 2012
I have been using a macro to search and highlight customer addresses for me, however I have changed my worksheet and now have the addresses in two columns instead of one (D for the numbers, E for street names) for sorting purposes.
What I would like to do is either; find a way to search using data from 2 cells to get a result, or have multiple results highlight and popup.
Using: Excel 2010
Code:
Sub SEARCH_FUNCTION()
Set FoundCell = Sheets("Route").Cells.find(What:=Sheets("Intro").Range("G15"), LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False)
If Not FoundCell Is Nothing Then
With FoundCell
[Code] ...........
View 2 Replies
View Related
Feb 24, 2011
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
View 4 Replies
View Related
Mar 6, 2014
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
View 3 Replies
View Related
May 23, 2012
Im using excel 2010 As it's 60 times quicker I was trying to speed up my code and replace all loops by putting the value into an array, and then transfer the array to the worksheet
It seems to be straightforward for math calculations like in this example:
[URL]
But no luck with the one below. I was trying to test it on a simple loop which replaces two types of string into the 3rd one:
Code:
Dim lastrow, lastrow2, i As Long
With Worksheets("KPI5")
lastrow2 = .Range("N" & Rows.Count).End(xlUp).Row
.Range("T7:T" & lastrow2).Value = .Range("F7:F" & lastrow2).Value
For i = 8 To lastrow2
If .Range("T" & i).Value = "Modification" Then
[code]....
View 4 Replies
View Related
Apr 3, 2013
So basically I have an Excel sheet which has keywords that need to be entered in Google search. I need the URL of the first page of the search result that appears after that keyword is entered. IS there a macro for the same?
View 3 Replies
View Related
Feb 4, 2006
How do I write a reference from a drop down list to another sheet and have
the formula do the if function so that it can do several arguments and return
"direct" if true and "indirect" if false.
View 14 Replies
View Related
Mar 27, 2014
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies
View Related
Jan 27, 2014
I have a workbook with one sheet (called "Pipeline") and another sheet called "Completed". The Pipeline sheet is used to keep track of all of the tasks that the team are working on, and then when the task is completed, it needs to be moved to the "Completed tab".
I currently have managed to write some code that looks for items marked "completed" in row G of the "Pipeline" sheet, then copies them over to the "Completed" tab, and then deletes the row from the "Pipeline" sheet.
There is one macro to copy the completed cells (called "Transfer"), and then another to delete the cells (called "Delete"). I then just have macro called "Clean" that just calls the transfer macro, and then calls the delete macro.
Often, there are 6 tasks marked complete, and only some of them will be copied over, but all of them will be deleted (a disaster).
Transfer Macro : [Code]....
Delete Macro : [Code]....
Overall Macro : [Code]....
View 7 Replies
View Related
Jul 11, 2014
I need to be able to export a project list to Excel and overwrite the contents in an existing Summary Report with the exported list. Is this possible? I am using SharePoint 2013 and Excel 2010.
View 4 Replies
View Related
Feb 11, 2014
I have a worksheet with a few "Multi-Select" type listboxes in it. I cannot seem to select the items within those listboxes... the mouse icon doesn't even change, it just shows that little plus-sign that is the default when you're just in your worksheet. (they're also ActiveX listboxes)
I can select them if I go into my Developer tab and select and deselect the "Design Mode" button. then everything works fine (mostly). Or if I resize the subwindow for the workbook. Then it (again, mostly) works fine.
It's like I have to trick Excel into allowing me to click on the checkboxes in my ListBox.
Some people I've given the file to use Excel 2007 and the file works for them. (I have Excel 2010)
I've looked up info on bound/unbound forms, but I can't tell if it applies, or how to use that. They were not created with a VBA macro, they were made using the buttons in the developer tab.
One final thing : Below the listboxes, I have some shapes that, when pressed, will take the selected items from their respective checkboxes and put them into some cells.
Here is the file: Setup form_Blank.xlsm
View 5 Replies
View Related
Jun 6, 2013
I have data that is formatted in an Excel 2010 table. The two columns in question are [Invoice #] and [Description]. In the description column I have descriptions of products as well as freight. The same invoice number would be tied to the product description as well as its associated freight. I need to filter out certain product types and their associated freight items.
The macro I wrote creates an array of invoice numbers that I want to filter out and leave the remaining invoices, but I can't get the filtering part to work. Here is my code:
Dim Invoices() As Variant 'array of invoice numbers
Dim Descriptions() As Variant 'array of Descriptions
Dim InvoiceFilter() As Variant 'array of invoice numbers to filter
Dim i As Integer 'counter
Dim j As Integer
j = 1
[Code]...
What happens now is that it filters out all values in the Invoice column instead of only the values in the InvoiceFilter array.
View 1 Replies
View Related
Dec 22, 2011
In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
View 4 Replies
View Related
Jul 10, 2014
I'm attempting another macro to copy the next years budgeted expenses from the LT Tracking tab to the Expense Tracking tab.
The result must be in the formula " ='LT Expenses'!D9 "
I have entered the following, however there is a syntax error on the last line: Sheet6.Cells(9, lcol).Resize(UBound(x, 1)) = x
Option Explicit
VB:
Private Sub Rectangle2_Click()
' NewExpenses Macro
' Transfers LT expenses to Expenses tracking sheet
[Code].....
View 6 Replies
View Related
May 30, 2013
I have a excel sheet with rows and columns. I want to use these values to write a text file.
Code:
PR
DTP
DTP
DTB
DTB
E618F0310AFD44CB9881B0E692B68874
E618F0310AFD44CB9881B0E692B68874
063D64761DFC46F485CE86F4F720A1B1
063D64761DFC46F485CE86F4F720A1B1
[Code] .......
Output:
HTML Code:
Project n 1
E618F0310AFD44CB9881B0E692B68874
AA
Project n 1
E618F0310AFD44CB9881B0E692B68874
BB
.
.
.
and so on, until all rows and columns has been written
View 2 Replies
View Related
Jun 12, 2013
I have an excel 2010 file that we export (save) to HTML so we can upload to our website.
1) Can I add a search box to the top of the page?
2) Can I freeze the row headings?
View 1 Replies
View Related
Feb 5, 2013
I have various spreadsheets that get into infinite loops sometimes when I search for things. Hitting break breaks it, and the search window (find all) shows the same exact entry hundreds of times.
This is Excel 2010.
View 2 Replies
View Related
Feb 26, 2014
How to Write a Macro for set a expiry date for Excel 2007 File.
View 3 Replies
View Related
May 19, 2014
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies
View Related
Mar 8, 2012
I'm using Excel 2010 on a Windows 7 machine.
I have one sheet with a large list of dates and total prices.
I have a second sheet with a list of dates and unit prices.
I want to divide the total price in my first list by the unit price on my second list.
I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.
My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.
View 2 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Jun 11, 2013
In an Excel 2010 worksheet I use three columns. I need a user to be able to input a word or phrase into a cell or input box, and have Excel highlight that word or phrase every place it occurs only in column C.
Can I do that with conditional formatting? Or do I need to use a function? Or do I need a macro?
View 5 Replies
View Related
Mar 12, 2013
I am using Excel 2010 and am looking for a formula that can solve this matix in column below. The yellow is where I would like the answers.
A
B
C
D
E
1
DEP
SPS
SUB
2
123456
[Code] ........
This is what it would look like when the formula were applied
A
B
C
D
E
1
DEP
SPS
SUB
2
123456
[Code] .........
View 3 Replies
View Related
Sep 4, 2013
I really like the slicers in Excel when working with data scenarios, but I don't like having to scroll up and down through the list of options.
Is there a way to add a "Search" box at the top like the traditional drop-down auto-filter? Or, does any loophole to making one?
View 2 Replies
View Related
Apr 5, 2014
I have my data arranged in a table on sheet1 as shown below.
Columns B to H contain the hours each person normally works on the days of the week Sun to Sat. In columns I to O are the hours that each person has booked as holiday for that week.
On sheet2 I would like to be able to enter a holiday day in C1. In A3 to A15 I would then have a list of all the people who will be working on that day and in C3 to C15 have a list of the people who are on holiday so the output on sheet 2 would look like this.
Basically I'm after the formulas for A3 and C3 that can be copied down the column depending on how big my table gets. I am using Excel 2010.
View 9 Replies
View Related
Jul 12, 2012
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
Excel 2007
A
B
1
Grouping
Number
2
[code]....
View 3 Replies
View Related
Aug 29, 2013
I have turned off show zeros on a sheet. This is good in general, but for certain cells I would like excel to show zeros if the formula output for that cell is zero.
Background information: I am working with a very large workbook, and the final sheet is my output file. This sheet is then exported to a CSV file and imported to another program in my workflow process. I need most blank cells to remain blank, so that they are interpreted as blank in the output program. Some of my cells are actually zeros which I intentionally inputted as zeros...those should be interpreted as zero and not blank.
View 5 Replies
View Related
Feb 13, 2014
im looking to have a drop down list on sheet2 that displays unique items in column A on sheet 1.
then when an item is selected from the drop down list, i want to be able to display all unique values that correspond to that option. i have attached an example worksheet
data on sheet1 is ever changing
View 4 Replies
View Related
