Excel 2010 :: Removing Text From Mixed Font Size Cells
Aug 4, 2012
I have text of size 14 and 18 mixed in cells in a column. Cells are font size 18 or mixed with both 14 and 18 size text. I need to sort out the text with one column of size 14 and another of 18 only. I am thinking of copying and pasting the column twice and run a macro in first column to remove the text of size 14, and another macro to delete text of size 18 in second column. I need the leftover text to be in same rows.
I tried everywhere and couldn't find a macro for mixed text cells. I am using Microsoft Excel 2010.
I'm looking to set up a spreadsheet whereby individuals answer questions and have to format their answer using a particular font, colour, font size and so on. The idea is that I can then compare their answer sheet to a pre completed one using an =IF function and get a total score. The only problem is =if and =exact only lookup cell text/numbers and don't look at how the text is formatted within them.
I have executed this macro from this spreadsheet many times but today, after I execute the macro, the box increased in size. I repositioned it on the page, resized it and re-executed. Now it is decreasing the font size within the button each time I execute. It executed just fine yesterday. I assume it's some setting in excel because I've tried another spreadsheet and am seeing the same result.
When a number is entered in cell S3, it triggers formulas throughout the worksheet to populate the it with information from another sheet. If the length of the text in B6 is greater than 80, the font size for B6 only should be 8; if the length of the text in B6 is less than or equal to 80, the font size for B6 should be 10. Regardless of the length of the text in B6, the font size for the rest of the sheet should not be changed.
I tried the following Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address "$B$6" And Target.Count > 1 Then Exit Sub Dim cnt As Long cnt = Len(Cells(6, 2).Value) If cnt > 80 Then Cells(6, 2).Font.Size = 8 ElseIf cnt < 80 Then Cells(6, 2).Font.Size = 10 End If End Sub
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
I am creating a heat map using two variables from a questionnaire: firstly the number of people impacted by a question; and secondly, the level of the impact. Respondents are asked to give these values in two adjacent cells. These are then multiplied to give a weight eg 1000 people x level 3 impact = 3000. I have used Conditional Formatting to colour the cell according to the impact level (0 = none - white (default), 1 = moderate - tan, 2 = significant - orange, 3 = high - red). What I want to do is then change the font size to give an indication of the number of people impacted, eg 1 - 1000 font 8, 1001 - 3000 font 12, 3001 - 8000 font 16, 8000 - 2000 font 24 etc. The size of font and colour will then represent the number of respondents and their impact.
I can't use Conditional Formatting as the value of 3000 could be derived from 1000 people at level 3 (red), or 3000 people at level 1 (tan). Is there another way of setting the font size depending on the cell value, eg by VBA?
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
I have a column in which the cells contain values such as "012321 BGH YRK". Is there any way you know of that I can remove just the text from every cell and keep the numeric values? A mass operation because there are literally hundreds of these cells. I am using Excel 2001.
In Excel 2010, you can color a cell with a fill color and a font color.
It can be done manually via one of 3 methods that I know of (aside from a macro or a routine):
-From the ribbon button (underneath the font size and increase and decrease font size toolbar buttons)
-By formatting the cell (right clicking on a cell),
-Clicking on the ribbon's font section (giving you the same 6 category format cell box as right clicking on a cell)
What I need is a routine that resets the Fill Color and Font Color toolbar buttons to "No Fill" and "Automatic" if I run it inside a macro or create a command button on a worksheet.
I have 5 worksheets that I currently have to add information to and cut/paste information from one to another. The initial information stays the same but I have to cut and paste it into one of the other worksheets based on wether or not we; need to decide on a job, are working on the job, lost the job, won the job or the job is complete.
I would like to create one master worksheet where the information can be entered with a drop down cell stating the status of the job (listed above). I created the master tab and linked the 5 subordinate tabs using an IF formula, but how can the subordinate tabs filter or sort the references and organize them on the top of the page rather than leaving a bunch of blank rows (because the info in these blank rows went to a different subordinate tab)? I want to enter the info in the master tab and simply change the pull down cell to change which subordinate tab the information shows up on. This should allow me to print the subordinate tabs as reports without having to manually cut and paste the info or filter it, correct?
I need a code that when i place a date in a cell D10 (Example:25-January-2013) it will then add 40 days of dates daily to AP10.In D9 can it also add the weeknumber (every 7 days the weeknumber increases by 1) corresponding to the day date in D10 (iso).Can this be attached to a button.Enter the date in D10 then press the button and the dates auto insert across the sheet daily to AP10.
Can the button say ADD DATE or REMOVE DATES.First date in D10.When the button says REMOVE dates all dates deleted when button pressed and cell D10 then says "add date here".If no date is placed in D10 and ADD DATE button is pressed a warning messagebox appears and says NEED TO ADD DATE .Will not work until date entered.When date entered in D10 "Add Date Here" disappears until REMOVE Date button is selected and again "Add Date Here" is displayed....not sure if this is possible but would be good if achieved. Excel 2010
I am trying to create a chart that would show all of the Amount values for each Size value that is in the example data below. The Size column has fixed values. In my example the values are: .5, 1, 2, 5, 8, 13 and 21. The Amount column data is variable. Any of the static Size values can be associated with many Amount values. I was attempting to have the static Size values on the X (horizontal) axis and the Amount values on the Y (vertical) axis. I would like to have all of the Amount values for each Size value be shown directly above the corresponding size value, in one vertical line. See example below.
I an creating this type of chart in Excel 2010.
Note, I am still new to this forum and don't know how to post pictures or Excel data into my posts. I am also using dots (periods) to provide separation in my examples.
I have a set of data that has a company name using commas to separate INC and LLC from the company name. e.g. Acme Explosives, LLC
I'm using Excel 2010, and when I try to use the find/replace functionality to find commas, I get an error message saying "We couldn't find what you were looking for. Click Options for more ways to search.
Short of editing all the fields manually (only about 300, so not too bad), I'm hoping there is a simple way to replace these commas with nothing.
I am using excel 2010. When I click on cells on one column, something like text box will pop up with information related to that column. How can I get rid of this text box. How to disable this text box which I think it has a link between the text box and cells on that column.
We want to extract the same letters with its numbers and put the same letters with numbers in one column and do this for all letters, but - this is important - while keeping them in their original row. The purpose of this is addition of data and easy rearrangement of the letter plus numbers order, e.g., to: B M N A T I W D Ḥ. As you can see not all the rows have all letters, nor are the seizes the same. There are thousands of such cells. Some parts are partly in bold, we want to maintain that layout after sorting. Such a thing should be easy for computers, but how could this extraction and manipulation be done (I have Excel 2010)?
P.S. There are two spaces after every ; that were eaten up here.
I need to remove numbers from a string of text and put them into new cells in Excel Starter 2010. There are two different values which need moving. The first is in parentheses and the second follows the parentheses.
Here's a few examples of what I mean:
Original text RED008 - Wickaman and Hoodlum bandwidth (0.06Gb @ 2.00) 0.12 MFR005EP - Various Artists bandwidth (0.19Gb @ 2.00) 0.38 RAZORS010 Future Cut bandwidth (0.01Gb @ 2.00) 0.01
would like to split into...
Cell 1 RED008 - Wickaman and Hoodlum bandwidth MFR005EP - Various Artists bandwidth RAZORS010 Future Cut bandwidth
Column 1 has 1200-1209,1300-1350,1523-1563 Column 2 has 1400-1409,1600-1650,1823-1863
I would like to take the range of e.g. 1200-1209 and have excel put 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 into separate adjacent cells for me. And be able to do this for each column/cell of data I have like this.
