Excel 2010 :: Removing Shadow From Comment Box?

Jan 14, 2012

Im trying to find out is there a way to remove the shadow around comment boxes in excel 2010.

View 7 Replies


ADVERTISEMENT

Excel 2010 :: How To Move Comment Box To Left Side Of A Cell

Feb 23, 2014

I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.

Can I alter it to make the comment box pop up to the left side of the cell.

[Code] ....

Is it possible to adapt this code to get me the desired results or will it have to be a separate one.

Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.

View 4 Replies View Related

Excel 2010 :: Automatically Sort And Removing Rows?

Dec 11, 2013

I have 5 worksheets that I currently have to add information to and cut/paste information from one to another. The initial information stays the same but I have to cut and paste it into one of the other worksheets based on wether or not we; need to decide on a job, are working on the job, lost the job, won the job or the job is complete.

I would like to create one master worksheet where the information can be entered with a drop down cell stating the status of the job (listed above). I created the master tab and linked the 5 subordinate tabs using an IF formula, but how can the subordinate tabs filter or sort the references and organize them on the top of the page rather than leaving a bunch of blank rows (because the info in these blank rows went to a different subordinate tab)? I want to enter the info in the master tab and simply change the pull down cell to change which subordinate tab the information shows up on. This should allow me to print the subordinate tabs as reports without having to manually cut and paste the info or filter it, correct?

View 5 Replies View Related

Excel 2010 :: Code For Inserting And Removing Dates

Dec 14, 2012

I need a code that when i place a date in a cell D10 (Example:25-January-2013) it will then add 40 days of dates daily to AP10.In D9 can it also add the weeknumber (every 7 days the weeknumber increases by 1) corresponding to the day date in D10 (iso).Can this be attached to a button.Enter the date in D10 then press the button and the dates auto insert across the sheet daily to AP10.

Can the button say ADD DATE or REMOVE DATES.First date in D10.When the button says REMOVE dates all dates deleted when button pressed and cell D10 then says "add date here".If no date is placed in D10 and ADD DATE button is pressed a warning messagebox appears and says NEED TO ADD DATE .Will not work until date entered.When date entered in D10 "Add Date Here" disappears until REMOVE Date button is selected and again "Add Date Here" is displayed....not sure if this is possible but would be good if achieved. Excel 2010

View 3 Replies View Related

Excel 2010 :: VBA - Keep Conditional Format After Removing Fusion

Feb 2, 2014

In Excel 2010, I'm using the following VBA code to unmerge cells:

Code:
Sub defusion()

With Selection
.MergeCells = False
.Locked = False
.Borders.Weight = xlThin
End With
End Sub

This don't keep the conditional format - the first cell, yes, but not the others. How to modify my signature?

View 1 Replies View Related

Excel 2010 :: Removing Comma From A Cell Formatted As General

Mar 10, 2013

I have a set of data that has a company name using commas to separate INC and LLC from the company name. e.g. Acme Explosives, LLC

I'm using Excel 2010, and when I try to use the find/replace functionality to find commas, I get an error message saying "We couldn't find what you were looking for. Click Options for more ways to search.

Short of editing all the fields manually (only about 300, so not too bad), I'm hoping there is a simple way to replace these commas with nothing.

View 9 Replies View Related

Excel 2010 :: Removing Text From Mixed Font Size Cells

Aug 4, 2012

I have text of size 14 and 18 mixed in cells in a column. Cells are font size 18 or mixed with both 14 and 18 size text. I need to sort out the text with one column of size 14 and another of 18 only. I am thinking of copying and pasting the column twice and run a macro in first column to remove the text of size 14, and another macro to delete text of size 18 in second column. I need the leftover text to be in same rows.

I tried everywhere and couldn't find a macro for mixed text cells. I am using Microsoft Excel 2010.

View 9 Replies View Related

Excel 2010 :: Filter To Select Records - Removing Unwanted Blank Cells

Jul 25, 2013

I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.

View 1 Replies View Related

Excel 2010 :: Add Comment To Cell Without Changing Cell's Contents?

Mar 13, 2012

How, via VBA, would I add a comment from a userform (text box name: txtReason) into a cell that may already have a comment in it? I would like to keep the comment that is in the cell and then have the program add a "/" and the next comment from txtReason..

(using excel 2010)

View 2 Replies View Related

Copy Contents Of Multiple Comment Boxes And Paste In Single Comment Box

Mar 13, 2014

how to copy the contents of multiple comment boxes and paste in a single comment box.

The big picture is that I have a number of cells with numerical values in and text in comment boxes. I want to be able to click a button to copy the contents of the comment boxes and paste them, along with the numerical value from the cell, into a single comment box, ordered by highest to lowest value within the comment box, then delete the original cells and comments.

I am quite new to VBA but have been coping quite well so far with information of the web and analysing recorded macros.

View 6 Replies View Related

Removing Extra Tabs From 2010+ Tab Delimited Export Whilst Ignoring Blank Rows

Aug 1, 2012

I have a sheet in an excel workbook which I export to a separate file and then save as a text document, I need to remove the tabs in this file, however the file (example attached) needs to be in a certain format to be imported into a piece of equipment which has a proprietary file format. Part of this format is the 2nd row and 5th row must remain present and empty.

[URL]

View 4 Replies View Related

Excel VBA - Add Comment On Change To Cell Value

Oct 1, 2012

I am looking to have a select few cells generate a comment when the user changes their value. I don't want the entire sheet to be affected as it will only apply to the header row of columns J:P.

I'm not sure if it matters but I have the worksheet protected and the cells in question are unlocked.

Below is an example of the code I'm trying to get to work.

Option Explicit
Public preValue As Variant
Private Sub worksheet_change(ByVal Target As Range)
End Sub
If Target.Count > 1 Then Exit Sub
Target.ClearComments

[Code] .......

View 1 Replies View Related

Use Excel VBA To Find Values In Table And Insert In To A Comment?

Jul 5, 2012

I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.

I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?

View 2 Replies View Related

Excel 2010 :: Getting Outlook Warning (2010) While Sending Email Through Macro

Mar 25, 2014

I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.

View 6 Replies View Related

Excel 2007 :: Comment Boxes Not Showing To Near The Related Cell?

Dec 9, 2012

I have worksheet with 5000 rows data's including the comments in one coloumn.My problem is when I edit the comments,the comment box shows somewhere else is not showing to near the related cell.I am using excel 2007,its happen after the upgradation of 2003 to 2007.

View 2 Replies View Related

Excel Function Removing Even Duplicates

May 7, 2014

I want to pull the very last odd duplicate. Example below, I want to pull out A3, and C5 and delete the rest. Is there a function that will allow me to do this?

For example,

Column 1 Column 2
A 1
A 2
A 3
B 1
B 2
C 1
C 2
C 3
C 4
C 5
D 1
D 2
D 3
D 4

View 1 Replies View Related

Removing Digits From Cell In Excel

Jun 10, 2014

find a formula or function where i can remove the last 4 digits from cells. I have a spreadsheet where there was might have been concatenation do where 4 digits were added to the end of part numbers in a cell. I need to remove just the last 4 digits so that I can do matches later on. Each cell has a different number of characters and i just need to remove the last for Example 154758NE20 or NFD148574DE11. Need to remove the NE20 and DE11 respectively.

View 6 Replies View Related

Excel 2007 :: Removing Duplicates In Row?

Oct 12, 2011

Can someone look at the sheet sample? I am trying to turn duplicates into a zero like Ive done in record 1 so that the same tax bill is not counted twice. The records are in rows and if I do a transpose and try to do it by hand it will take forever cause I have hundreds of records.

Excel 2007
BQBRBSBTBUBVBWBXBYBZCACBCCCDCE1txt_nme_taxpayertxt_nme_streetcity state txt_addr_1txt_parcel
Year 10Year 9Year 8Year 7Year 6Year 5Year 4Year 3Year 2Year 12QUINCY'S REALTY INC % RASH & A19900
HOLIDAY LNCHARLOTTE, NCPO BOX 16003192170500.55516.22712.71768.860000780.713FERGUSON, BENJAMIN10733
MONTECARLO DRCHARLOTTE, NC3508 SARGEANT DR151840720.4423.5180.381.988.2387.689.1789.1789.1789.174HARVEY,

[Code] ........

View 2 Replies View Related

Excel Keeps Removing Period From Filename?

Sep 10, 2013

I have some files with filenames like text-text-text-text.lastname.xlsm. When I go to save the file, Excel keeps removing the period between the last "-text" and "lastname". change the structured filenaming convention? So far, I've noticed that this seems to happen with .xlsm file extensions, but not with .xlsx file extensions.

View 5 Replies View Related

Removing Stop Words From Sentence In Excel

Jul 6, 2012

I have an excel sheet with one column having one sentence in each cell of the column (rest all the cells of the sheet are vacant).

Now, i want to 'find' and 'remove' a list of pre-specified stop words such as "a", "the", "it", "of", etc. from every sentence and then get the resulting sentence pasted in the adjacent columns cell.

(Also for example the word "a" should be removed only when it is a separate word and not part of a word. Likewise for other stop words).

Enclosing a test file : shashank_test.xlsx‎

View 7 Replies View Related

Sending Excel Format But Removing All Links?

Oct 11, 2012

I want to take a copy of an excel document and send it to another user who want to see the values of the results and not have to have all the links and formulas. If there a way to save or publish a document so you change all the current values into values on the screen and remove all the formulas and links to other documents or workbooks that are based in my folders. I just want the values in another spreadsheet and it will show my tables and graphs in the same manner.

View 6 Replies View Related

Excel 2007 :: Removing Decimals Without Rounding

Jan 29, 2014

I have recived a CSV file with dollar amounts that need to be formated with out a deciaml and with our rounding. Example I need 12558.64 to be changed to 1255864.

View 3 Replies View Related

Removing Percentage Sign On Excel Chart Axis?

May 21, 2014

I realize all the numeric data was originally not in percentage format (a simple division without being multiplied by 100). So when I set the vertical axis to percantage format, it does display it as a percentage but with the "%" sign. Is there any way I could get rid of the sign? It's not necessary as the axis has already been titled accordingly. I'd hate to redo all calculations, multiply by 100 and then create new charts only to get rid of the sign...

View 1 Replies View Related

Excel 2007 :: Removing Page 1 Etc From Sheet Background?

Apr 6, 2010

I'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.

View 6 Replies View Related

Excel 2007 :: Removing Blank Rows - Autofilter

Nov 8, 2011

I have several sheets with about 250,000 rows per sheet.

But, even I sort by Column A, there are STILL hundreds or rows that are total blank interspersed down the page . . . I can't autofilter for blanks because there is too much data . .

How can I get rid of them?

View 2 Replies View Related

Excel 2007 :: Removing Pipe As Last Character From Cell

Mar 16, 2012

I've got a whole load of cells that have a pipe ( | ) on the end of the value which I'm trying to remove.

Easy enough thinks me, so;

Code:
=LEFT(AB188,LEN(AB188)-1)

And then Copy / Paste Values Still has a pipe on the end... I check the cell for trailing spaces, there are none...

I check the length of the cell (658) against the length of the result from the formula (657)...

So, my formula works, but when I copy and paste as values the pipe remains.

I'm using Excel 2007 and the cell contatins other pipe characters I'd like to keep in there so I can't find and replace or anything.

View 8 Replies View Related

Excel 2007 :: Removing Duplicates Within Time Range

May 28, 2012

I am using Excel 2007 on Windows 7. I would like to remove duplicates as follows: If column A = column A, column B = column B, and the two rows are within one hour of each other, then remove all duplicates, leaving one instance of the row. As you can see, sometimes the duplicates are right next to each other, and sometimes have rows between them. (Rows 1 & 2, Rows 30 & 32). Even though this sample doesn't show it, sometimes there can be tens of duplicates within an hour, not just two.

Excel 2007
ABCD1EruptionI Can't Stand The Rain (78)3/7/20129:12:55
AM2EruptionI Can't Stand The Rain (78)3/7/20129:10:02
AM3ChicagoJust You 'N' Me (73)3/7/20129:05:59

[Code] .........

View 2 Replies View Related

Removing Blank Space Before And After Sentence In Excel Cell?

Oct 24, 2012

I am facing problem to delete the blank Space before & after the sentence in excel Cell.I have thousand No. of Rows for which I want to delete the Empty Space before & after the Sentence.May I know how I will do this in quick way.

View 2 Replies View Related

Linking To Column In Another Excel File And Removing Empty Cells?

Jul 15, 2013

Let's say I have 2 files: Source file and working file. In source file there are some text names in a column that are updated once in a while.

1. I need to create a column in "working file" such that is taking values from column in "source file" even when "source file" is closed.

2. It should take only non empty values, because I need to create a cell with validation list that consists of text names from the column.

Solving attempt: By searching some solutions in forum I found that the first part I can do in the following way: copy column from "source file", select in "working file" a "paste special" option and choose "paste link". It works, but the problem is that it imports all the column: if in "source file" the column consists of words "a" (cell A1), "b" (cell A2) and all other cells in A column are empty - in "working file", after linking, it appears as "a" (cell A1), "b" (cell A2) and all other cells in A column are "0" (zeros) till cell A65536. And I need that in "working file" column after linking will appear as "a" (cell A1), "b" (cell A2) and all other cells will be empty, so by setting one of cells in B column to be a list (by "Data" - "Data validation" - "List" ) - it will consist only from "a" and "b", and not from "a", "b", "0", "0", "0", .... (65534 zeros).

View 2 Replies View Related

Excel 2007 :: Removing Border Line From Camera Shot

Dec 1, 2013

The title in the attached chart is a camera shot transferred from another excel 2007 worksheet in the same workbook.

I'd like to remove the border line, I've tried right clicking... then format picture ...no dialogue box comes up. I've scrolled through all the commands in the ribbon + non ribbon commands and can't find anything that seems appropriate that's not greyed out ....

border line.docx‎

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved