Excel 2010 :: Save As PDF - Document Not Saved
Apr 12, 2013
I have an Excel 2010 spreadsheet which I need to print to PDF. There is a simple "Save as" PDF option which always fails with just the message "Document not saved". I created a simple test sheet with just a few numbers on to check it isn't due to complexities with the particular workbook. This works on my home PC (Windows 7) but not on the Windows 7 Club PC which is where I need to run it to generate the output which eventually will go to the club's website.
It also fails the same way if I try to create an XPS file (although I don't want an XPS file).
This fails from the normal user interface "Save As". I also tried it from a VBA macro and run it: I get Run-time error '-2147467261 (80004003)' Document not saved
I've googled endlessly but all the references I tried failed to uncover a solution. I was a bit surprised that this doesn't seem particularly common and most of the reports seem to be a couple of years old or older (no workarounds were useful).
View 1 Replies
ADVERTISEMENT
Nov 8, 2012
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
View 9 Replies
View Related
Jul 14, 2014
We have a spreadsheet on a server.Without using code is there a way to show who saved the workbook last?
using 2010
View 1 Replies
View Related
Mar 5, 2013
I am using excel 2010 on windows 8. I load a file which has been sent to me via e-mail and save it with an upgraded name, I then do a large amount of data input and save the file again, I do this regularly and even test load it at times to check it has saved, finally I save and close the file and then on reloading I discover the version I have is the first one I saved! all the work I have done on it has disappeared! I also sometimes find random .tmp files with non-sensical names in the folder to which I have saved, but I do not have the rights to open these .tmp files.
View 2 Replies
View Related
May 11, 2012
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
View 1 Replies
View Related
May 15, 2009
I have an xls file that has many sheets in.
One of the sheets is a sumamry sheet that get's dulpicated, values pasted, then (the single sheet) exported to a new file. Upon trying to save this file, I keep getting the run time 1004 error message and that my document cannot be saved.
I've struggled for days trying to find out the source to no avail.
What is more frustrating is that when I try to save it (after exiting the macro), it seems to work ok.
I do get the compatability error message (which I don't get on the 'original/parent' workbook) there is a not about format errors, though I'm not sure that's the source of the problem.
View 9 Replies
View Related
Mar 14, 2013
How do I add a password to protect the PDF that I create from my excel 2010 document?
View 5 Replies
View Related
Feb 27, 2013
My coworkers and I use a couple of Excel documents to store statistics. The document is on a network share. We all have Office 2010, my coworkers are on Windows XP, I am on Windows 7.
If I open the document and make changes, then save it to the network location I can open the document later and see the changes but my coworkers do not see any changes I have made. Also If my coworkers make changes to the document the 3 of them see the changes but I do not.
If I go straight to the network share the timestamp on the document only changes for changes I made.For example if I go to servernamefoldernamestats.xls and add data to the file. Then save and close it. I can reopen the file and my changes are there.
Tomorrow Coworker 2 opens the same file from the same location but it has data from 2 days ago, with a timestamp of 2 days ago and my data is missing. They then reimput the data I entered, and add todays data. Then they save it and close.I open the file it has my data from yesterday, but not the new data entered by coworker 2.
View 3 Replies
View Related
Mar 21, 2013
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB:
Sub letter()
Dim myWord As New Word.Application
Dim adr As Variant
[Code]....
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
View 2 Replies
View Related
Jun 30, 2014
In my Excel 2010 workbook I wen through File > Info > Check for Issues > Inspect document. But as it's shown following, it doesn't show anything. Why?
Capture.jpg
View 5 Replies
View Related
Nov 23, 2011
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
View 3 Replies
View Related
Mar 11, 2014
am using Excel 2010 and having issues trying to save a worksheet to a specified file location with the save date....
I have tried several posts form this forum and elsewhere and can't seem to get the macro to do what I want.....
I want to save a 'worksheet' from an open workbook that I use for updating information to the same file path as the workbook with the date the file saved...
View 6 Replies
View Related
Oct 2, 2012
Excel 2010, Windows 7: Is it possible to password protect an Excel document at an "Administrator" or a executive level. I want to grant access to the document, and the ability to manipulate it as they choose, to everyone with the password but prohibit them from changing the password once they are in.
View 1 Replies
View Related
Sep 6, 2012
I'm trying to make a macro check if a file has been saved (ever). If so I want the macro to do a regular save (with already esatablished filename and location) before it proceeds with the rest of the macro. If the file hasnt been saved (if it runs from a new workbook) then I want it to pop up the save.as dialog, so that the user can choose the name and location of the file before the macro continues .
The macro itself is saved in personal.xlsx.
View 1 Replies
View Related
Mar 5, 2012
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
View 1 Replies
View Related
Mar 18, 2014
I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
View 8 Replies
View Related
Apr 10, 2013
I need to create a macro that will allow me to save a PDF from an XL file I am creating by running a report out of Access. This report yields a workbook with 2 sheets in it. The first tab (sheet) called "Mishkon" and the second called "Women's League". I need to save these reports separately as PDFs and they need to be saved in seperate locations. The first sheet (Mishkon) needs to be saved here: \OSOFSDataDayHabMishkon . The second sheet needs to be saved here: \OSOFSDataDayHabWomen's League . Here is the twist... Both sheets need to take their name from their G3 cells. I have Excel 2010 and dont want to print from my Adobe PDF printer. I would like to save as a PDF so I can run it off of computers that dont have the Adobe PDF printer installed.
View 5 Replies
View Related
Feb 17, 2009
I need a script that will turn a excel doc into a txt doc. Thats the easy part. The hard part (at least I think it is), is I need it to be in a certain format and I'll do my best to explain that fomat below.
View 9 Replies
View Related
Aug 13, 2012
USING EXCEL 2010
I am trying to record a macro where the last step is to SAVE AS the file. I want it to use the current date as the end of the file name.
i.e.
Daily OST -- 2012-08-10
Daily OST -- 2012-08-11
Daily OST -- 2012-08-12
etc...
This is what is currently in the macro but all it gives me is the first part "Daily OST --". How to fix?
ActiveWorkbook.SaveAs Filename:= _
"Y:ProjectsProgram ManagementPIODaily ReportsDaily OST -- " & DateString & ".xlsx" _
, FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False
View 6 Replies
View Related
Dec 8, 2012
In 2010 I can save a file with data validation and it says it saves it OK but when I reopen it later It removes all data validation.
Is this a bug in 2010??? I had saved it under different formats same results.
View 2 Replies
View Related
Oct 14, 2013
Here is something I have noticed with using Compress Images in 2010.
When I run Compress Images from the save as dialog box in 2007, the file size is slightly larger than if I run it in 2010. However, if I then send the resulting excel file out to people, if they are viewing it on an iPad, then they cannot see the images at all from the 2010 version but can see them fine if the excel file is from the 2007 version (with exactly the same data and images in there).
I cannot figure out why this may be. The options on both are set as "Email (96ppi)" and with "Delete Cropped areas of pictures" ticked.
View 3 Replies
View Related
Apr 15, 2014
I have a file containing 20+ tabs and would like to be able to save each tab as a separate Excel file (with the same name as the existing tab)
View 6 Replies
View Related
May 17, 2014
Windows 8.1 Excel 2010, I open a Template, make some changes in the template then I want to save the modified template as a Template ".xltm" under a new name. I'm using the following code for the new workbook name (which works except for the file extension);
ActiveWorkbook.SaveAs Filename:=ChkLst_TEXT_path & Application.PathSeparator _
& "NewChkLsts" & Application.PathSeparator & ShtNm
By default it saves the workbook as ".xlsm". How can I get it to save it as ".xltm"?
View 1 Replies
View Related
Mar 4, 2014
Using Excel 2010, I have a workbook containing a variable number of PDF files captured as embedded OLE Objects. I wish to save each of the embedded PDF files to disk and assign the filename based on the contents of column 1 of the row containing the OLE Object.
View 1 Replies
View Related
Dec 5, 2012
I run excel 2010... I have xls file (see file attached) with both English and Non English characters.
When I save this file as xls or xlsx - everything is good, but when I save the file as CSV and try to open it later - I see that the English characters stays the same but the non English characters become gibberish.
How can I save a file (that include some non English characters) as CSV without loosing the non English characters? Is there a way to do that from within the excel 2010 menus? Or maybe there is an external tool?
Attached file : 913365454523.xls
View 1 Replies
View Related
Apr 24, 2014
I have windows 7 and excel 2010 and am using a macro that opens up a csv file(I think) of daily reports into Excel and then automatically delineates it and formats it how I want it. I will be using this to save a new file every day for the reports from the previous day and want to include at the end of that macro a way to prompt the user to "save as" so that each day they can run the macro and enter in the date and save that report for further use. I am wondering what VBA code I could use at the end of the macro code to prompt the Save As box and if I could already have the save us set up in the following folder... "W:Daily to Fortis Excel2014(the user will put in the date here)".
I've been looking around sites and trying to figure it out. I need the file format to be the same as when you save as "Excel Workbook". I was trying to use the Saveas (filename) function and could get it to save every time as a specific file name in that location but when I run it the next day it has the same name and saves over itself. So I need the user to be able to put in todays date as the filename to create a new one every day.
View 7 Replies
View Related
Jan 28, 2013
I am looking for a vba to use a button to save a file using the cell as its name and save the file in xlsm format. I am using Excel 2010.
View 12 Replies
View Related
Aug 16, 2013
I have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VBA code
View 4 Replies
View Related
Jun 24, 2012
I recorded a macro to save my file as PDF and assigned the macro to a button. Easy. Now I would like to change my macro to pause when the file is saving to allow the user to enter a file name. If that is not possible, I'd like to reference a cell to use as the file name. I have gone through other posts and tried changing my macro, but always get an error. I am using Excel 2010. Following is my code for saving to pdf.
Sub SavePDF()
'
' SavePDF Macro
'
[Code]....
View 9 Replies
View Related
Nov 26, 2012
I just got a new computer and upgraded to Excel 2010 and Windows 7. When I try to open a workbook in Excel 2010, my saved file paths on the left side of the screen are gone. I want to put them back in there.
In Excel 2007 running Windows XP, I would just right click in the left side menu and click "add" and now that's no longer an option.
View 1 Replies
View Related
